CS Paper Radar

Hardware-as-Regularization: Enhancing Data Consistency in Imitation Learning via an Adjustable Passive Compliant Leader Arm

Hideyuki Ichiwara, Yushi Kaida, Hirokazu Ishida

cs.RO ·submitted 2026-10-16 05:56 UTC · v1

Abstract

Low-cost passive leader arms enable scalable data collection for imitation learning, but their lack of restoring forces leaves redundant joints unconstrained, yielding highly inconsistent joint-space trajectories. We address this with a low-cost passive joint module (an adjustable mechanical clutch and a 3D-printed spiral spring) that pulls each joint toward a user-defined neutral posture. This passive restoring force acts as a physical prior equivalent to joint-space $L_2$ regularization (``Hardware-as-Regularization''), improving kinematic consistency with shorter completion time than an unregularized arm and preserved movement smoothness. Experiments show substantial variance reduction over a naive passive arm, trajectory consistency on par with an active virtual spring of the same actuator class, and substantially higher downstream success rates (e.g., 73.3% vs. 36.7% on Block Stacking); a stiffness sweep shows consistency degrading monotonically as stiffness decreases, confirming that mechanical stiffness behaves like a regularization weight.

Closest papers

Nearest neighbours by meaning across the whole index.

Energy-Regularized Imitation Learning for Force- and Work-Aware Robotic Manipulation

cs.RO cs.CV ·2026-09-16 ·Toshiki Otani, Hiromu Taketsugu, Norimichi Ukita
published similarity 0.73
Abstract · ECCV 2026 Workshop on Force-Grounded, Cross-View Articulated Manipulation

This paper studies energy-aware manipulation as a physically grounded learning problem. We define a joint-space mechanical-work proxy from joint torque and angular displacement, and train a differentiable energy predictor that estimates this work from robot states and actions. The predictor converts a non-differentiable simulator-side physical quantity into a differentiable regularizer for fine-tuning a pretrained manipulation policy. We instantiate the framework with RVT-2 on RLBench and evaluate 12 manipulation tasks involving object contact, articulated motion, placement, pushing, and sweeping. The proposed fine-tuning reduces the average mechanical work from 208.8J to 204.4J (i.e., 2.1% reduction), while the mean task success rate also increases slightly from 86.2% to 86.9%. These results show that work-aware policy optimization can suppress physically inefficient motion without requiring an explicit differentiable dynamics model.

0.34

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

cs.RO cs.GRcs.LG ·2026-11-14 ·Matthias Jammot, Pembe Gizem Özdil
code/data similarity 0.70
Abstract · 39 pages, 13 figures, 28 tables. Project page: https://impedancemimic.github.io/ImpedanceMimic/

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

0.22

UniReflex: Plug-and-Play Force Control for Pretrained Generative Policies via Fast-Slow Reflex

cs.RO ·2026-08-18 ·Yan Huang, Shoujie Li, Ziwu Song, Wenbo Ding
highly cited similarity 0.69
Abstract

Generative imitation learning policies excel at trajectory planning but lack closed-loop force regulation, while directly incorporating force modalities often requires redesigning or retraining the network. We present UniReflex, a universal plug-and-play framework that equips frozen generative policies with variable impedance control (VIC) for contact regulation, guided by force-direction intent collected during demonstration, without further slow-backbone fine-tuning. By non-invasively intercepting deep latent representations from the action head, UniReflex drives a fast reflex network that decouples active force exertion from external interaction response. This scheme predicts normalized anisotropic stiffness directions for directional compliance allocation. Furthermore, UniReflex integrates an adaptive gating mechanism that enables seamless transitions between position-dominant planning and force-dominant execution. Real-world bimanual experiments demonstrate that UniReflex significantly improves contact stability and success rates while preserving original position accuracy. Our approach achieves 25-66x lower per-step backward latency relative to joint training strategies on the evaluated backbones.

0.48

CALM: Current Aligned Link Manipulation for Single Arm Oversized Object Lifting

cs.RO ·2026-09-24 ·Jun Hu, Sihan Chen, Kosta Jovanovic, David Navarro-Alarcon, Xueqian Wang +2 more
similarity 0.69
Abstract

Most robots manipulate objects solely with their end effectors, whereas humans flexibly leverage different body parts, such as the forearm and elbow, especially when handling oversized objects. Learning such whole-arm manipulation is chal-lenging due to long-horizon sparse rewards, limited contact sens-ing, and the sim-to-real gap in contact and actuator dynamics. To address these challenges, we propose Current-Aligned Link Manipulation, a framework for learning long-horizon contact-rich manipulation using motor current as joint load related feedback. Three stage-specific policies first learn repositioning, grasping, and lifting using privileged simulation information, and a stage router sequences them to generate complete task demonstrations. For sim-to-real transfer, a causal current mapper predicts physical motor current from simulated joint histories, aligning the actuator current observation between simulation and hardware. A unified student policy then learns from these demonstrations using only deployable sensor observations and is further refined with DAgger. The task policies are trained entirely in simulation, and the final student is deployed on hardware. Experiments demonstrate 76.2% (762/1000 trials) complete-task success in simulation and 73.3% success (22/30 trials) on the physical robot for sequential oversized-object lifting.

0.23

Dissecting Motion-Prior Regularization for Data-Scarce Robotic Insertion

cs.RO ·2026-09-15 ·Ning Hu, Shuai Li, Jindong Tan
published similarity 0.68
Abstract · Accepted for poster presentation at the IROS 2026 Workshop on Industrial Applications of Robot Learning (IARL). 4 pages, 2 figures, 1 table

This study asks whether training-time motion-prior regularization can improve insertion success when a diffusion policy is learned from only 15 demonstrations. Minimum jerk discourages abrupt changes in predicted translational acceleration; speed-curvature regularization instead couples movement speed to path geometry. These are candidate mechanisms for task completion, not safety guarantees. We compare the priors individually and jointly, neither prior, and generic smoothness, with 80 real-robot trials per setting pooled over four recorded condition classes. Joint and minimum-jerk-only settings each achieved 70/80 successes (87.5%), versus 69/80 (86.3%) for speed-curvature only, 66/80 (82.5%) for neither prior, and 67/80 (83.8%) for generic smoothness. Success rates and Wilson 95% confidence intervals are visualized for direct comparison. Joint regularization exceeded neither by 5.0 percentage points but provided no observed gain over minimum jerk alone. The results motivate minimum jerk as the simpler candidate for replication, without establishing synergy, biomechanical specificity, improved safety, or distribution-shift robustness.

0.36

PACT: Posture-Aligned Co-Design Technique for Hand Configuration and Retargeting in Multi-Finger Imitation Learning

cs.RO ·2026-10-13 ·Koyo Sasazaki, Satoshi Funabashi, Pranav Ponnivalavan, Alexander Schmitz, Tetsuya Ogata +1 more
code/data similarity 0.68
Abstract · 9 pages, 6 figures, 2 tables. Submitted to IEEE ICRA 2027. Project page: https://pact-hand-2027.github.io

The fidelity of teleoperated demonstrations used for imitation learning is determined by how faithfully a robot hand can replicate the operator's posture. The posture retargeting law that the robot will execute is typically selected only once the hardware has been finalized, and conventional hand designs often neglect human-like grasping postures. We introduce PACT, an optimization based on human grasping postures that jointly optimizes the mechanical parameters of a 17-servo robot hand (link lengths, joint offsets, mounting angles, and base placements) and its nonlinear posture retargeter (a linear human-to-robot joint map, per-joint posture-IK weights, and damping). The optimization enforces full-finger correspondence (MCP, PIP, DIP, and tip of each finger) to human poses from the DexYCB dataset, and is constrained by servo interference, assembly clearances, and flat-hand protrusion, so the resulting design can be physically assembled. We fabricate the PACT Hand and validate it through teleoperation experiments and an imitation-learning demonstration. The hand reproduces all human hand keypoints with a kinematic RMSE of 3.9 mm, compared to 12.8 mm for the LEAP Hand baseline, and keeps all fingertips within 10 mm on every grasping posture, while the baseline achieves this for only 21.6% of the poses. Under matched per-joint torque limits, it lifts twice the baseline payload, 2 kg against 1 kg, and deforms a held paper cup seven times less, reaching a deformation level comparable to a human hand. It also achieves an 86% grasping success rate on YCB daily objects, compared to 64% for the baseline. Finally, as a demonstration, an imitation-learning policy trained on demonstrations collected with the PACT Hand achieved a 75% success rate at held-out placements in a can pick-and-place task. Project page: https://pact-hand-2027.github.io

0.31

I3L: Iterative Interactive Imitation Learning for Whole-Body Mobile Manipulation

cs.RO cs.AI ·2026-10-13 ·Wensi Ai, Christopher Luey, Karthik Dharmarajan, Evans Han, Yunfan Jiang +5 more
code/data similarity 0.68
Abstract · Project website: https://i-3l.github.io/

Policies trained offline from teleoperated demonstrations can degrade outside their training distribution. This gap is particularly acute in long-horizon whole-body mobile manipulation, where long horizons amplify compounding errors and coordinated arm, torso, and base motion makes exhaustive demonstration coverage impractical. We introduce I3L, an integrated hardware and learning system that combines whole-body correction with iterative policy refinement to address this last-mile reliability gap. Its low-cost, open-source JoyLo+ interface uses policy-tracking leader arms and touch-triggered takeover to enable coordinated corrections across the body parts, while iterative deployment and retraining allow operators to target failures of the updated policy. We evaluate I3L across three robot embodiments and eight simulated and real-world tasks, including four long-horizon whole-body mobile manipulation tasks. Controlled simulation experiments show that four-round HG-DAgger achieves the highest final success on both tasks. Under this protocol, I3L improves autonomous success over the base policies by an average of 68.3 percentage points and achieves at least 90% success on every task, outperforming demonstration-only training by 35.6 percentage points on average with the same number of training trajectories. Averaged across tasks, takeover duration per episode decreases by 72% over four rounds. Together, these results show that I3L helps close the last-mile gap between offline training and reliable deployment and provides practical insights into collecting and using corrections for long-horizon whole-body mobile manipulation. Videos, visualizations, and appendix are at https://i-3l.github.io/.

0.28

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.68
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18