CS Paper Radar

Rollbot 2: Agile Locomotion by a Single-Actuator Spherical Robot

Jingxian Wang*, Chen Yu*, Sam Kriegman, Michael Rubenstein

cs.RO ·submitted 2026-10-16 19:01 UTC · v1
benchmark

Abstract

Reducing actuator count simplifies robot hardware but also removes independent inputs for maneuvering. The original Rollbot steered by modulating a quasi-stable helical orbit, but moved slowly and relied on external motion capture. Rollbot 2 preserves the single-actuator design while its redesigned mass distribution enables near-straight rolling and more direct travel toward commanded paths and beacon targets. Onboard inertial and ultra-wideband sensing support learned steering, beacon seeking, and waypoint following through one motor-velocity command. Rollbot 2 autonomously approaches UWB beacons without motion capture and completes a 468~m manually commanded indoor route at 0.87~m/s. On the shared 4.8~m ``N'' waypoint benchmark, all 16 trials complete the path with a mean traversal time of 10.8~s and mean time-averaged deviation of 7~cm. Its fastest traversal takes 8.0~s, over 70 times faster than the original Rollbot's 564~s run despite minor protocol differences. These results show how mechanical redesign, onboard sensing, and learning-based control improve the agility and autonomy of a single-actuator spherical robot.

Closest papers

Nearest neighbours by meaning across the whole index.

Predict Before You Step: Auditable Occupancy Forecasting for Dynamic Obstacle Avoidance under Sparse Guidance

cs.RO ·2026-09-22 ·Yuhui Mao, Fen Liu, Shenghai Yuan, Tianxin Hu, Ruimeng Liu +1 more
similarity 0.57
Abstract

Legged robots under sparse waypoint guidance must avoid moving obstacles using partial, rapidly changing LiDAR observations. We present LOOP (Latent-recurrent Occupancy rollOut Policy), a local avoidance policy that connects sparse waypoint guidance to a frozen locomotion controller at 50 Hz. From occupancy and ego-velocity histories, a recurrent predictor forecasts future occupancy over a 1 s horizon by warping the current map with learned flow and visibility gates. These maps guide velocity selection through map-derived features and geometric risk estimates, providing an explicit interface for inspecting and replacing predictions. In encounter-synchronised Isaac Lab evaluations, LOOP achieves 57.1% head-on success at obstacle speeds of 2.5-3.2 m/s, exceeding a retrained reactive baseline by 8.2 percentage points. Comparisons with a rollout-free BEV policy show smaller, scenario-dependent gains from the prediction branch, including improved crossing success and reduced variability across training seeds at the highest head-on speeds. The adapter runs onboard a Unitree Go2 in 14.5 ms per step and completes all 16 real-world crossing trials without collision, demonstrating deployment feasibility.

0.17

Physical AI for Intralogistics: Benchmarking the NVIDIA Sim-to-Real Ecosystem for Cosmos-Enhanced COMPASS Navigation on Industrial Mobile Robots

cs.RO ·2026-10-20 ·Charbel Abi Hana, Rayan Zaitouni, Kameel Amareen, Mohamad Mostafa, Hasan Sayour +4 more
benchmark similarity 0.56
Abstract

Classical robot navigation stacks are reliable but often require re-engineering for each new robot type and site. Learning-based navigation shifts this effort from hand-tuned parameters to data generation and training, where a policy adapts to each new embodiment or facility by fine-tuning in simulation. Whether policies adapted this way stay reliable on real industrial robots has seen little systematic testing. We study this for NVIDIA's X-Mobility and COMPASS workflow for training learned navigation policies on Idealworks robots. In simulation, we extend the COMPASS benchmark with two embodiments, the differential-drive iw$\mkern-1.5mu.\mkern-1.5mu$hub and an omnidirectional Humanoid Mobile Platform (HMP), and with a digital twin of the Idealworks R&D center. For the real world, we fine-tune X-Mobility on data from this digital twin, with and without sim-to-real variants generated by NVIDIA Cosmos, train COMPASS on top of it from scratch in the digital twin, deploy the resulting policies on the iw$\mkern-1.5mu.\mkern-1.5mu$hub's onboard Jetson AGX Xavier, and benchmark them in the Idealworks R&D center against COMPASS trained only on NVIDIA's environments and the existing Idealworks navigation stack on task success, efficiency, safety, smoothness and onboard compute. Running every static scenario both in a digital-twin replica and in the real facility measures the sim-to-real gap and how far Cosmos-augmented data closes it. Training in the digital twin with Cosmos sim-to-real augmentation raises the real-world success rate of learned navigation from 65.3% to 91.7% across four scenarios and nearly halves its weighted travel time compared with simulation-only training, bringing it within 8.3 points of the production navigation stack, fully onboard; with an integrated global planner, it also reaches far, occluded goals in every trial.

0.13

Integrated Design and Reproducible Feasibility Analysis of a Four-Wheel Rover with Packet-Commanded Imaging, LiDAR Ranging, and Learning-Assisted Target Recognition

cs.RO ·2026-10-27 ·Sabik Bin Sultan, Shafi Bin Sultan, Safwan Sadad, Aranya Abeer Khan Prapya, Maria Sultan
benchmark similarity 0.56
Abstract · Research Manuscript for NASA HERC 2027

This study develops an integrated, reproducible design assessment for a four-wheel educational rover intended for the high-school remote-control division of the 2027 NASA Human Exploration Rover Challenge. The architecture combines commercial differential drive control, independently sprung wheel carriers, separate drive and task batteries, and a Raspberry Pi-based subsystem that executes received imaging and ranging commands. The analysis reconciles component lists with dimensioned computer-aided design views, derives mobility and electrical constraints, and connects sensor geometry to command execution. At the estimated mass of 10.919 kg, a 215 mm wheel rotating at 200 RPM produces a theoretical rolling speed of 8.105 km/h; consequently, the nominal motor label does not establish compliance with an 8 km/h design ceiling. A steady 20-degree climb requires at least 1.255 newton-meters per wheel under an assumed rolling-resistance coefficient of 0.10 and equal torque sharing. At 50 ft, an ideal 12-inch feature spans approximately 71 pixels across a full-resolution Camera Module 3 Standard image, while a 1-degree pointing error displaces the ranging ray by approximately 266 mm. An executed synthetic benchmark compares color-geometry rules and two linear support-vector classifiers on 2,400 generated board crops with scene-disjoint evaluation. A separate reference command executor is checked using mocked hardware. These software results and analytical sensitivities support a testable development plan; the study does not report physical rover trials. The principal contribution is a traceable connection between component choices, failure mechanisms, quantitative design limits, and reproducible verification tasks.

0.18

LQR-ArUco Fusion: Robust Hierarchical Control for Navigation and Asymmetric Manipulation in Two-Wheeled Robots

cs.RO eess.SY ·2026-09-28 ·Anupam Chatterjee, Arpita Kumari
published similarity 0.56
Abstract · 6 pages, 9 figures, 2 tables. Accepted for presentation at the 2026 IEEE International Conference on Intelligent Navigation and Systems (CIN…

We propose a hierarchical control framework to address severe dynamic instabilities and navigational drift that arise when a two-wheeled inverted pendulum (TWIP) robot attempts asymmetric object manipulation. While two-wheeled platforms are highly manoeuvrable, their constant balancing adjustments make onboard odometry highly unreliable for precise navigation. Furthermore, the addition of a side-mounted robotic arm introduces unactuated lateral roll moments when a payload is lifted, a challenge heavily compounded on uneven terrain. To solve these coupled problems, our architecture divides the workload. An offboard vision system tracks overhead ArUco markers to provide high-latency global waypoint navigation, bypassing odometry drift. Simultaneously, a low-latency onboard control loop rejects active physical disturbances using inertial and encoder data. In our physical experiments, this dual-loop approach enabled the custom-built robot to navigate accurately, reject transient impacts from speed bumps, adapt to a dynamic seesaw ramp, and carry a payload securely without falling over its narrow wheelbase.

0.43

Mapless, Stabilizing, and Anti-Stuck Flipper Control for Articulated Tracked Robots

cs.RO ·2026-10-09 ·Valentýn Číhala, Pavel Sarga, Martin Pecka, Tomáš Svoboda, Karel Zimmermann
similarity 0.55
Abstract · 8 pages, 3 figures and 2 tables

Nearly every autonomous or semi-autonomous flipper controller assumes access to an elevation map of the terrain under and in front of the robot. The terrain beneath the chassis is occluded in the sensors, so the map is remembered through odometry integration, whose drift corrupts it. We present Stabilizing Anti-Stuck (SAS), a mapless controller that combines a stabilization term for body roll and pitch with an anti-stuck term that frees the robot when it gets stuck. As input, SAS uses the IMU, the flipper joint angles, and a motion cue that only tells whether the robot is moving. The cue is computed over a short window and never accumulated, so SAS does not inherit the odometry-integration drift that corrupts the map. We deploy SAS on a tracked robot with four flippers and evaluate it against manual teleoperation and prior flipper controllers in a large comparison, both in simulation and on a real obstacle. In simulation and on the real robot, SAS achieves traversal quality comparable to state-of-the-art map-based controllers. On a log hidden in tall grass, invisible to the LiDAR, the best map-based controller gets stuck while SAS traverses the hidden obstacle without a problem.

0.34

Vision-Guided Closed-Loop Autonomous Navigation of Light-Driven Janus Microbots

cs.RO cond-mat.soft ·2026-10-15 ·Kanhu Charan Andia, Harsh Prashant Katole, Parth Nitinkumar Bhosale, Hemant Kumar, Dhruv Pratap Singh
similarity 0.54
Abstract · 26 pages, 7 Figures

Artificial microbots capable of precise and autonomous navigation could provide versatile platforms for microscale transport, manipulation, and task execution in complex environments. However, reliable navigation becomes increasingly challenging at the micrometre scale, particularly when the surrounding environment changes dynamically. Here, we develop a vision-guided closed-loop navigation framework for light-driven cube-shaped hematite/TiO2 Janus microbots with a characteristic size of approximately 3 μm. Real-time visual localization using a custom-trained YOLOv11 object-detection model is integrated with discretized waypoint-based magnetic steering to enable precise navigation along complex prescribed trajectories, with more than 90% of the measured trajectory deviations remaining below 6 μm across the tested path geometries. The framework further enables arbitrary user-defined free-hand trajectories and autonomous navigation through a physically confined maze. In dynamically changing environments, A* path planning enables real-time path replanning while avoiding multiple independently swimming 5 μm spherical Janus micromotors. Finally, the microbot selectively captures multiple cargo particles and autonomously transports and delivers them to a predefined location while simultaneously avoiding dynamic obstacles. These results establish an integrated platform combining programmable trajectory control, autonomous path planning, real-time environmental adaptation, and task execution within a single light-driven Janus microbot system.

0.19

Enhancing Robotic Perception and Adaptability through Sensor Fusion and Origami-Inspired Designs

cs.RO ·2026-10-07 ·Namai Chandra, Jaison Jose, Kavi Arya, Shivaram Kalyanakrishnan
similarity 0.54
Abstract · 11 pages, 11 figures, 3 tables

Compact mobile robots must recover scene geometry under changing lighting and surface texture while working within tight payload and cost limits. We present a compact mobile robot that uses origami-inspired wheels for locomotion and active control of its sensing geometry. As the wheels move between terrain-adaptive configurations, the changing chassis pitch sweeps a 2D LiDAR through intermediate elevations; held wheel positions provide a chosen viewing angle. An IMU accounts for chassis attitude, and a fusion node projects LiDAR returns into the RGB-D depth stream supplied to RTAB-Map. The arrangement uses the wheel actuation already present on a sub-300 USD, sub-2 kg prototype to extend the scanner's viewing geometry. We assess depth fusion in a textureless indoor corridor and an outdoor sunlit area, with three runs per sensor configuration in each setting. Mean full-frame invalid-depth fractions fell from 21% to 11% indoors and from 48% to 18% outdoors. The prototype combines improved depth coverage with a continuously adjustable LiDAR viewpoint using the same actuation that reconfigures its wheels.

0.25

LiteNWM: Efficient Latent World Models for Onboard Visual Navigation in the Wild

cs.RO ·2026-10-08 ·Linkai Liu, Yuntian Zhang, Zhenshan Bing, Chen Chen, Lingjuan Lyu +3 more
similarity 0.53
Abstract · 12 pages, 11 figures, including appendix

Direct visual navigation policies generate trajectories efficiently but do not explicitly evaluate their future consequences. Generative navigation world models provide this foresight through visual rollouts, which are costly when evaluating multiple candidates. We present LiteNWM, a latent navigation world model that shares visual encoding across candidates and jointly predicts their action-conditioned future representations at multiple horizons, while a learned scorer uses these predictions to select trajectories. In offline evaluations on RECON, SCAND, and SACSoN, LiteNWM reduces macro-averaged trajectory error by 17.56% relative to NoMaD+NWM-XL and achieves a 128.00-fold end-to-end speedup on an RTX 5090. The same evaluator transfers from NoMaD to MBRA without proposer-specific retraining, reducing MBRA's macro-averaged trajectory error by 16.2%. In real-robot experiments in unseen indoor and outdoor environments, LiteNWM improves navigation success from 43.3% to 83.3% relative to NoMaD. These results demonstrate that LiteNWM can be deployed for future-aware planning and closed-loop navigation on a physical robot.

0.27