CS Paper Radar

AI-Enhanced Radiation Classification in ROS

Youngseo Lee, Cesar Alan Contreras, Tianshu Ruan, Manolis Chiou, Rustam Stolkin

cs.RO ·submitted 2026-10-18 12:43 UTC · v1

Abstract

This study presents the development of two Robot Operating System (ROS) nodes with a primary focus on differentiating seven radioactive isotopes. The first node, referred to as the model training node, uses a Gradient Boosting classifier to identify and classify these isotopes. The classifier achieved a reported overall accuracy of 95\% on the held-out test dataset. The second node, known as the prediction node, provides classification results when users input data in CSV format. For the practical demonstration, the C12137 radiation detector module was mounted on the Jackal UGV, and an operator approached different radiation sources to collect data. To support future dataset expansion, we also developed a method for converting gamma-spectrum graph images into CSV files. In a separate robotic evaluation across three source locations, 30 of 42 trials were correctly classified (71.43\%). Am-241, Co-60, Cs-137, Na-22, and Ti-44 were correctly classified in all six trials each, whereas Ba-133 and Eu-152 were incorrectly classified in all six trials each. These results show lower accuracy in robotic trials than in the held-out test set.

Comment
7 pages, 4 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

PiMiX 2.02: Toward AI-Driven Data Fusion in Radiographic Imaging and Tomography

eess.IV physics.data-an ·2026-09-11 ·Zhehui Wang, Shanny Lin, Nicholas Amano, Ramya Gurunathan, Katie Liu +5 more
similarity 0.53
Abstract · 12 pages, 5 figures

PiMiX (Physics-informed Meta-instrument for eXperiments) was introduced for multi-instrument, multi-experiment, and simulation-experiment data fusion in radiographic imaging and tomography (RadIT). Here we present PiMiX 2.02 as an evolving AI-enhanced cyber-physical meta-instrument integrating imaging sensors, near-sensor computing, data fusion, physics-informed inference, and human-supervised AI workflows across X-ray, neutron, and other modalities. Demonstrated capabilities include multimodal CMOS radiation imaging, simulation-assisted sub-pixel neutron localization, and edge-deployed optical-neural-network (ONN) inference; GPU and ONN implementations achieved greater than 96% precision for neutron-event detection with sub-micron localization. A further advance is human-in-the-loop agentic-AI co-analysis of X-ray and neutron images from inertial-confinement-fusion experiments. Beyond conventional preprocessing, the workflow generates competing feature hypotheses, ranks contours using physics-informed evidence, estimates confidence, and presents alternatives for human review. The same architecture adapts to different physics: X-ray analysis emphasizes dark, nonuniform ring structures using deformable closed paths and multi-scale evidence, whereas neutron analysis targets bright emission envelopes using fractional-emission levels, intensity gradients, and cross-filter persistence. We also highlight automated comparison of an as-designed stereolithography model with an X-ray CT reconstruction of an additively manufactured metal lattice. Together, these examples show progression from AI assistance in specific processing tasks to multi-task, multi-domain scientific co-analysis. PiMiX 2.0 further provides a pathway toward PRISM, a RadIT scientific foundation model, and tighter integration of diagnostics, digital representations, inference, and experimental control.

0.37

MANTLE: A Framework for Adaptive In-Situ Planetary Perception Using a Modular Uplink Principle

cs.CV ·2026-08-28 ·Pranav Durai, Gary Doran
similarity 0.52
Abstract · 10 pages

Planetary surface exploration missions rely increasingly on autonomous robotic platforms capable of interpreting complex terrain to ensure safe navigation, enable targeted science, and improve operational efficiency, as demonstrated across past Mars missions from Viking through Perseverance. Among the key perception capabilities, landform classification provides contextual information for landing site selection and scientific analysis, while boulder segmentation supports hazard assessment and path planning. This paper presents MANTLE, a multi-task adaptive network for terrain and landform extraction. The model uses a shared DINOv2 backbone for high-level feature extraction with task-specific heads: a classification head for large-scale landform classification, and a segmentation head for pixel-wise boulder localization, each trained on curated datasets built respectively from HiRISE orbital imagery and MSL surface-level imagery. The classification head achieved a test accuracy of 92.56% across seven Martian terrain classes, while the segmentation head achieved a validation IoU of 0.753 and showed strong cross-sol generalization on a held-out test set from previously unseen rover traverses. A key advantage of MANTLE is its modular, extensible design, formalized here as the Modular Uplink Principle: only a shared, frozen backbone needs to remain onboard, while subsequent perception capabilities are trained on Earth as lightweight task-specific heads and uplinked without retraining the full model. This work demonstrates two such high-impact capabilities, terrain classification and boulder segmentation, as an initial realization of a framework built to support many more over a mission's lifetime. With this foundation, future explorers need not arrive on Mars fully formed, but can continue to learn, adapt, and grow more capable with every uplink.

0.21

Zero-shot evaluation of open vision-language models as System 1 decision models on radiology tasks

cs.CV cs.AI ·2026-11-01 ·Bradley J Erickson, Sara Salehi
similarity 0.49
Abstract · 22 pages, 3 tables, 2 figures

Purpose: We compared two multimodal System 1 decision models, Clef 27B and d1 3B, with a traditional LLM (Qwen 3.8-27B) on seven radiology tasks covering text, radiographs, CT and MRI. Methods: Three models were compared: Clef, Qwen3.8-27B and d1. Three tasks were interpretation of text and 4 were detection of finding in images. The tasks were: 1. finding presence of finding in CT-RATE chest CT reports; 2. Presence of finding in PadChest chest radiograph reports; 3. the same 18 findings on CT-RATE chest CT but 3D volumes; 4. MR safety status of devices from AccessGUDID device records; 5. line and tube position on RANZCR CLiP chest radiographs; 6. motion-artifact severity on MR-ART T1-weighted brain MRI and 7. sequence identification on BraTS 2021 brain MRI. The primary endpoint was AUROC. There was no fine-tuning of the models on the tasks. Results: All models completed all tests without a failed request. All retrieved findings from reports almost perfectly (AUROC >0.95). Clef ranked higher than its Qwen backbone on CT-RATE volumes and RANZCR lower on MR-ART. The two did not differ on BraTS, GUDID or PadChest, and differed by 0.002 on CT-RATE reports. On BraTS, Clef correctly identified 90 of 100 FLAIR volumes while Qwen never chose it. d1 ranked lower than Clef on six of seven tasks. No model performed well on motion severity. Clef was faster per request than Qwen on tasks with many questions per input. d1 used 3 to 9 times less energy per request than Clef. Conclusions: System 1 models can perform important tasks in radiology with high accuracy, at lower compute cost than LLMs used in the usual way. When an LLM is constrained to a single answer token, its cost and performance is similar to System 1 models unless multiple questions are asked. A 3B System 1 model was close to the 27B models on report text but not on images. No model performed well on motion severity.

0.25

RoboJev: An Open Vision-Language Judge for Robot Success Detection

cs.RO cs.LG ·2026-10-24 ·Josef Liyanjun Chen
similarity 0.49
Abstract · 15 pages, 5 figures

Many robot manipulation videos do not indicate whether the task was successfully completed. RoboJev-27B is an open-weight vision-language model that takes a task instruction, 10 frames of a manipulation attempt, and (if available) final frames from auxiliary cameras and predicts whether the robot accomplished the task. RoboJev-27B is a variant of JEV-27B-VL, trained with a rank-32 LoRA adapter on the language model only (keeping the vision encoder frozen) using 52,598 episode records. It also uses a source-specific KL penalty that applies only to research data, anchoring predictions closer to the original model on those sources. It uses a calibrated two-token readout that outputs success/failure probabilities in a single forward pass. On 268 held-out episodes of the same robot model (SO-101), RoboJev-27B attains 95.2% balanced accuracy and 0.993 AUROC. It also generalises to episodes collected by unseen labs/robots (AUROC = 0.890 over 459 episodes) as well as to clearly labelled community-collected episodes (accuracy = 93.3% over 135 episodes), where the base model attains an AUROC = 0.900 on the unseen-lab/robot subset with the same inputs. It takes 0.26 seconds per episode (median, serial) to infer on a single H100, which is about \$0.19 per 1,000 success predictions at \$2.69 per GPU-hour (not including media processing and serving costs). RoboJev-27B is released together with its inference code, along with a transparent evaluation: 20,628 predictions organized into 29 model/protocol entries are made available to facilitate browsing and to enable reproducible benchmarking of success detection. We also compare against strong API-based frontier VLMs, which take in fewer input frames (4 images from the primary camera only); note that this comparison is not strictly like-for-like because RoboJev-27B is given more frames at inference.

0.28

Uncertainty-Aware Compositional Localization and Placement Assessment of Catheters and Tubes in Chest X-Rays

eess.IV cs.CVcs.LG ·2026-08-11 ·Harshil Lodhiya
similarity 0.48
Abstract · 21 pages, 8 figures Included declaration for paper is under consideration at Pattern Recognition Letters

Assessing catheter and tube placement on chest X-rays is safety-critical yet tedious and error-prone. Current deep learning methods either classify placement globally -- losing track of which device is where -- or segment all devices into a single mask, making per-device assessment impossible when catheters overlap. We introduce UCompCXR, a compositional framework that detects local catheter fragments, associates them into device instances via graph-based clustering, fuses per-fragment tip predictions through precision-weighted Gaussian estimation, and classifies placement per device. On the RANZCR CLiP dataset (30,083 images, 5-fold patient-level CV with bootstrap CIs), UCompCXR detects 26% more devices than a strong multi-task baseline sharing the same MobileNetV3 backbone, with 75% fewer false positives and well-calibrated tip uncertainty (95% coverage = 0.948). The aggregate tip error rises -- but only because the model finds devices the baseline misses entirely, especially nasogastric tubes. On matched devices, catastrophic localization failures drop substantially. At 2.27M parameters in a single forward pass, the model is deployable on resource-constrained clinical hardware.

0.40

Vision Language Models for Radiation Patterns to Antenna Parameters

eess.SP ·2026-09-13 ·Pallaviram Sure, Chandra Mohan Bhuma
similarity 0.48
Abstract · 10 pages, 3 Figures, 9 Tables

Observed radiation patterns often serve as a primary evidence of antenna's behavior, but translating them into meaningful interpretations is a nontrivial and expertise intensive task. This demand necessitates automated pattern interpretation, a diagnosis problem encountered in applications encompassing Radio Frequency (RF) surveillance, non cooperative emitter characterization and Over The Air (OTA) testing. This work addresses the incorporation of Contrastive Language Image Pre training (CLIP) and other recent vision language models to perform such a diagnosis. These models analyze the multimodal data and extract discriminative features directly from radiation pattern images, to train Machine Learning (ML) approaches for meaningful inferences on geometrical and performance parameters of the antenna. Performance of three such vision language models is demonstrated using RadPat 50K, a synthetic dataset of radiation pattern images generated for uniform linear arrays (ULAs). The radiation pattern images are processed by the vision language models to obtain discriminative features. The CLIP extracted features are processed by either ML classification models to infer antenna parameters number of elements, element spacing, weighting scheme, presence of grating lobe and steering angle, or ML regression models to infer parameters beam width, directivity and main lobe direction. ML models achieve accuracies exceeding 70 percent, highlighting the potential of multimodal Artificial Intelligence (AI) towards intuitive antenna analysis.

0.27

Mining beyond Earth with Space Robots: Exploration, Sampling, and Extraction

cs.RO ·2026-08-21 ·Dong Li, Dujun Nie, Xiaotong Zhang, Ruilin Wang, Yuchen Li +9 more
surveycode/data similarity 0.48
Abstract

Space resource acquisition and utilization, commonly referred to as Space Mining, represent critical pathways for enabling sustained human exploration and unlocking commercial opportunities in space. These resources mainly include helium-3, water, mineral resources on the Moon and Mars, and abundant mineral deposits on asteroids. Due to the harsh conditions of space, communication delays, and high launch costs, the development of autonomous robotic systems is critical to achieving efficient, cost-effective space mining. This paper provides a comprehensive overview of space mining robotics and associated technologies. First, we review the background of space mining, including international policies, commercial entities, and recent advancements. We define a systematic six-stage architecture for space mining: Exploration is initiated by (1) remote sensing for target identification and (2) precise in situ robotic detection; Sampling progresses from (3) single-robot small-scale sampling to (4) multi-robot large-scale excavation; and Extraction integrates (5) autonomous resource extraction and (6) final integration into in situ construction or terrestrial transport. Additionally, we review and curate existing resources for space mining research, including real-world mission data, terrestrial analog datasets, and high-fidelity simulation environments. Finally, we identify critical open challenges in autonomous space mining and delineate a strategic research roadmap to bridge current technological gaps, fostering the transition toward a sustainable off-world economy. To track ongoing developments in space mining, we maintain an updated project page: https://github.com/OpenSpace-Lab/Space-Mining-with-Robotics-List.

0.55

Deep learning methods for gamma event selection in TAIGA-IACT image analysis in stereo-mode

cs.LG astro-ph.IMastro-ph.HE ·2026-10-12 ·E. O. Gres, A. P. Kryukov, P. A. Volchigov, A. P. Demichev, J. J. Dubenskaya +4 more
published similarity 0.47
Abstract · 10 pages, 4 figures, Proceedings of The 10th International Conference in Deep Learning in Computational Physics, July 6-8, 2026, Moscow, Rus…

In astrophysical complex TAIGA there are four Imaging Atmospheric Cherenkov telescopes (IACTs), located at a distance of 300-500 m from each other, due to which extensive air showers (EAS) generated by cosmic and gamma radiation are recorded by a single telescope or by multiple telescopes simultaneously (stereo-mode). The analysis of EAS images from two or more Cherenkov telescopes together is of particular interest, since for this approach the reconstruction of physical parameters of the primary gamma ray is much more accurate than in mono-observations. However, the gamma-ray event reconstruction strongly depends on the quality of the hadron background suppression of the classifier, therefore, the gamma event selection stage is one of the important ones in the further analysis of IACT data. We propose and study several neural network methods for gamma event selection in joint TAIGA-IACT image analysis. Neural network methods we suggested involves a single-stage analysis of IACT images from two telescopes, while the second method considers the formation of autoencoder-derived essential features that contain the EAS physical parameters, including the type of primary particle.

0.33