CS Paper Radar

Exact model reduction by Lie symmetry groups

Hamed Taghavian, Jens Sjölund

eess.SY ·submitted 2026-10-19 17:25 UTC · v1

Abstract

We develop a model-reduction technique based on Lie group theory for general engineering models described by a system of algebraic, ordinary, and/or partial differential equations with an arbitrary number of inputs, outputs, and constant parameters. The proposed method reduces the parameter space of these models without changing their external behavior, that is, their input-output maps. We apply this method to phase-field models used for high-fidelity simulations in electrochemistry to accelerate the analysis and design of metal-ion batteries.

Closest papers

Nearest neighbours by meaning across the whole index.

Koopman Spectral Reduced-Order Modeling of Spherical Diffusion in Lithium-Ion Batteries

eess.SY ·2026-09-09 ·Jihoon Moon
similarity 0.53
Abstract

Physics-based battery models provide internal electrochemical states for estimation and control, but solving the partial differential equations governing solid diffusion can be computationally expensive. This paper therefore develops an analytical Koopman spectral reduced-order model for the single particle model. The Koopman eigenfunctionals and eigenvalues are derived directly from the eigenfunctions of the self-adjoint zero-flux diffusion operator. The zero mode represents the volume average concentration, the nonzero modes describe decaying radial gradients, and projection of the current dependent surface flux yields a linear state-space model that reconstructs the average, surface, and full radial concentrations. Unlike data-driven Koopman models, the proposed formulation requires neither training data nor empirical lifting functions. Compared with a 400 control volume finite volume model (FVM) during a constant 1C discharge, the 80 Koopman mode model achieves negative and positive surface concentration RMSE values of $1.26\times10^{-5}\,\mathrm{mol/m^{3}}$ and $4.10\times10^{-6}\,\mathrm{mol/m^{3}}$, a terminal voltage RMSE of $8.42\times10^{-4}\,\mathrm{V}$. The models with 5 and 80 Koopman modes were approximately 225 and 31 times faster than the FVM model, respectively. These results demonstrate a physically interpretable and computationally efficient representation of battery diffusion dynamics.

0.30

LLM-Assisted Generation of Transparent, Open-Source Multiphysics Models of Electrochemical Devices

cs.AI physics.chem-phphysics.comp-ph ·2026-10-07 ·Sebastian Castro, Maya F. Schuchert, Spencer A. McCluskey, Eric W. Lees, Justin C. Bui
code/data similarity 0.50
Abstract · 25 pages, 6 figures, Supplementary Information and implementation guide provided as ancillary files

Multiphysics continuum models are powerful tools for studying electrochemical devices, enabling in silico reactor design and resolution of local pH, potential, and concentration fields that govern device performance but are difficult to measure experimentally. However, constructing such models requires substantial numerical expertise or reliance on proprietary software. Here, we show that frontier large language model agents can remove this implementation burden while keeping the underlying physics under researcher control. Using one-dimensional electrochemical CO2 reduction to CO in a porous gas diffusion electrode as a test case, we develop a machine-readable, human-specified modeling harness containing governing equations, parameters, numerical methods, logical build stages, and human-verifiable checkpoints. From this specification, the agent reproducibly constructs complete multiphysics models in open-source Julia. Independently built models, including fully autonomous agent-built models, agree with an equivalent COMSOL implementation to within 0.7% of the peak CO partial current density, and with one another to within 0.04%. Systematically planted errors demonstrate the importance of explicit specifications for reproducibility and reveal the agent's capabilities and limitations in debugging model physics. This framework establishes a more transparent approach to multiphysics modeling in which physical descriptions and governing equations, rather than specialized code, become the primary inputs for computational model development.

0.47

An Analytical Review of Model Order Reduction Methodologies of Converter-Dominated Power Systems for Stability Studies

eess.SY ·2026-10-02 ·Goran Grdenić, Marco Fraccaro, Josipa-Pina Milišić
similarity 0.47
Abstract · 53 pages, 4 figures

The rapid integration of renewable energy sources is transforming modern electric power systems into converter-dominated networks characterized by complex multi-timescale dynamics and new stability interactions over a wide frequency range. Accurate analysis of these phenomena requires high-fidelity models of transmission networks and power electronic converters, which often result in large-scale differential-algebraic systems with significant computational burden. This paper provides an analytical review of model order reduction techniques for converter-rich power systems, with particular emphasis on the key equations employed in the reduction process. Advantages and limitations of commonly used strategies, including timescale-based singular perturbation, projection-based, operator-based, data-driven, and machine-learning based methods, are discussed. The synthesis highlights key challenges related to harmonic interactions and multi-frequency dynamics, and outlines directions for the development of computationally efficient yet dynamically accurate reduced-order models for future power systems.

0.29

Observable functions of rational ODE models and how to find them

cs.MS math.DScs.SCeess.SY ·2026-09-05 ·Alexander Demin, Gleb Pogudin, Christopher Rackauckas
code/dataunusual similarity 0.47
Abstract

Consider a parametric ODE control model. A function of the states and parameters is called observable if its value can in principle be reconstructed from input-output data. The observable functions form a field, called the observation field, represented naturally by a set of generators. Even when the model is not fully observable, this field captures the information still accessible from input-output data. We present an algorithm for computing a concise generating set for the observation field of a model with rational dynamics. The algorithm relies on two new results: one allows observable functions to be extracted from the coefficients of repeated Lie derivatives of the outputs, while the other reduces the required orders of differentiation by exploiting identifiable parameter combinations. We implement the resulting algorithm in StructuralIdentifiability$.$jl (https://github.com/SciML/StructuralIdentifiability.jl). For computational efficiency, we employ recent techniques for differential elimination and rational function field simplification. Using models from epidemiology, chemical kinetics, and cancer modeling, we show that the algorithm produces generators with domain-specific interpretations that can inform model analysis and development.

0.59

Data-driven discovery of intrinsic Lie point symmetries of differential equation systems

cs.LG math.DGmath.DSmath.GR+1 ·2026-11-05 ·Ilker Gurcan, Kadir Ustun, Ramazan Gokberk Cinbis
benchmark similarity 0.46
Abstract · 63 pages, 10 figures. Code and data availability statements are included in the manuscript

Discovering continuous symmetries directly from differential-equation data can reveal geometric structure for model reduction and scientific machine learning without symbolic determining equations or a closed-form representation of the governing system. We formulate intrinsic Lie point-symmetry discovery as an operator-theoretic problem on sampled jet-space data. Admissible generators are identified from a sampled determining operator and separated from redundant, solution-dependent, and geometrically trivial directions. The framework combines prolongation, sequential subspace restrictions, and a fixed nonlinear dictionary linear in trainable coefficients. A rank-stabilization preflight test diagnoses systems whose represented intrinsic symmetry algebra does not stabilize under dictionary refinement. On a controlled differential-equation benchmark with an analytically known 11-dimensional represented intrinsic symmetry algebra, the method recovers the complete represented generator set, reproduces its Lie-bracket structure to numerical precision, and approximates a known generator beyond the training domain. Here we show that explicit intrinsic continuous-symmetry generators can be recovered from data obtained from exact or approximate differential systems.

0.20

Learning Reduced-Order Dynamics with Singularity via Latent-Augmented Neural Ordinary Differential Equations

cs.LG ·2026-08-22 ·Xiaorui Wang, Yu Zhou, Wenjie Mei, Dongzhe Zheng, Yang Bai +1 more
top venue similarity 0.45
Abstract

This paper addresses the issue of self-intersecting trajectories (in phase space) in industrial reduced-order modeling and proposes the Latent-Augmented Neural Ordinary Differential Equations (LA-NODEs) framework. From the perspective of artificial intelligence, the proposed method augments conventional neural ordinary differential equations to enhance model expressiveness, enabling the representation of conflicting vector fields that may arise in reduced-order systems, thereby improving learning accuracy. Through theoretical analysis, the underlying mechanism of the framework is established, and a condition for determining the minimum required augmentation dimension is derived. From the perspective of engineering applications, the effectiveness of the proposed method is validated on the reduced-order system of two representative industrial models, namely an interior permanent magnet synchronous motor (IPMSM) drive and a distributed energy system (DES). Experimental results demonstrate that the proposed method can recover system features that are difficult to capture using conventional approaches and achieve superior performance in terms of prediction accuracy and modeling fidelity, thereby providing an effective approach for high-precision data-driven modeling of complex industrial systems.

0.47

BranchIP: Learning Adaptive Equivariant Computation for Interatomic Potentials

cs.LG physics.app-phphysics.chem-phphysics.comp-ph ·2026-10-01 ·Laura Zichi, Gil Harari, Chuin Wei Tan, Marc L. Descoteaux, Albert Zhu +4 more
similarity 0.43
Abstract

Equivariant machine learning interatomic potentials (MLIPs) have revolutionized atomistic modeling, but accurate treatment of complex materials and molecular systems demands expensive models. This limits simulation length- and time-scales, with tensor products a key computational bottleneck. The recent emergence of foundation-scale MLIPs further exacerbates this challenge. We present Branch Interatomic Potential (BranchIP), a single-model framework for learned adaptive tensor product computation, trained with a novel distillation loss. In our experiments on two systems of physical interest, a heterogeneous catalysis system and a proton-conducting solid acid electrolyte, BranchIP accelerates MLIPs across model sizes by up to $2.4\times$ while reducing memory usage by up to $2.6\times$. This is achieved while maintaining physical fidelity. Furthermore, the learned adaptive computation provides model interpretability by revealing which interactions demand deeper computation and showing how computational depth relates to chemical complexity and dynamics.

0.21

Isostable-Based Nonlinear Model Reduction for Power System Oscillations

eess.SY math.DS ·2026-09-27 ·Kaiyang Huang, Dan Wilson, Kai Sun
similarity 0.43
Abstract

Power systems are often represented by high-dimensional dynamic models, making nonlinear control design computationally expensive and limiting its practical application. Oscillation analysis and damping control therefore commonly rely on linearized models, which do not capture the nonlinear oscillatory behavior induced by large disturbances. This paper proposes an isostable-based model reduction method for nonlinear modal analysis of power systems. The method constructs an invariant manifold associated with a selected oscillatory mode and uses isostable coordinates to describe the mode with only two real state variables. The isostable formulation gives linear autonomous modal dynamics, with nonlinear state reconstruction and input response computed on the modal manifold. An optimal damping control problem is then formulated directly in the reduced coordinates. Case studies on the IEEE 39-bus system demonstrate the accuracy of the proposed model in describing nonlinear oscillations and show improved damping compared with control designed using a linear reduced model.

0.38