CS Paper Radar

Koopman Spectral Reduced-Order Modeling of Spherical Diffusion in Lithium-Ion Batteries

Jihoon Moon

eess.SY ·submitted 2026-09-09 03:31 UTC · v1

Abstract

Physics-based battery models provide internal electrochemical states for estimation and control, but solving the partial differential equations governing solid diffusion can be computationally expensive. This paper therefore develops an analytical Koopman spectral reduced-order model for the single particle model. The Koopman eigenfunctionals and eigenvalues are derived directly from the eigenfunctions of the self-adjoint zero-flux diffusion operator. The zero mode represents the volume average concentration, the nonzero modes describe decaying radial gradients, and projection of the current dependent surface flux yields a linear state-space model that reconstructs the average, surface, and full radial concentrations. Unlike data-driven Koopman models, the proposed formulation requires neither training data nor empirical lifting functions. Compared with a 400 control volume finite volume model (FVM) during a constant 1C discharge, the 80 Koopman mode model achieves negative and positive surface concentration RMSE values of $1.26\times10^{-5}\,\mathrm{mol/m^{3}}$ and $4.10\times10^{-6}\,\mathrm{mol/m^{3}}$, a terminal voltage RMSE of $8.42\times10^{-4}\,\mathrm{V}$. The models with 5 and 80 Koopman modes were approximately 225 and 31 times faster than the FVM model, respectively. These results demonstrate a physically interpretable and computationally efficient representation of battery diffusion dynamics.

Closest papers

Nearest neighbours by meaning across the whole index.

Koopman-Based Model Predictive Control for Simultaneous State of Charge and Temperature Balancing of Lithium-Ion Cells

eess.SY ·2026-09-07 ·Jihoon Moon
similarity 0.59
Abstract

Cell-to-cell electrical and thermal variations produce nonuniform state of charge (SoC) and temperature distributions in lithium-ion battery packs. This paper proposes a Koopman-operator-based framework for simultaneous SoC and temperature balancing of series-connected cells. Cell-specific Koopman predictors identified using extended dynamic mode decomposition are assembled into neighboring-cell error dynamics that retain heterogeneity and thermal-disturbance effects. A Tikhonov-regularized feedforward controller provides numerically robust compensation without excessive current amplification, while constrained Koopman-based model predictive control (KMPC) regulates the residual errors through a convex quadratic program. Three-cell simulations validate the controller under two consecutive Urban Dynamometer Driving Schedule cycles. KMPC achieves balancing performance comparable to nonlinear model predictive control (NMPC). Relative to the uncontrolled case, KMPC reduces the RMSEs of the neighboring-cell SoC and core temperature differences by 66-81% and 57-76%, respectively, while reducing the computation time per optimization from 0.0259s for NMPC to 0.0028s for KMPC.

0.31

Robust State-Parameter Estimation in Second-Order Thévenin Batteries

eess.SY math.OC ·2026-11-09 ·Wissam Khennoune, G. Q. Bao Tran, Thach Ngoc Dinh, Jérémy Van Gorp, Mathieu Moze
similarity 0.54
Abstract · Under review for European Control Conference (ECC)

We propose a scheme for estimating the full states and parameters of a second-order Thévenin battery model, using distinct features of the measured current. An identification step, run during suitable rest intervals, identifies the resistances and capacitances of the two RC branches from the voltage relaxation by linear least squares, without knowledge of the open-circuit voltage (OCV) map. An online estimator then runs continuously: the polarization voltages are estimated by open-loop observers; the series resistance is updated at current jumps using least squares; the state of charge (SOC) is propagated by Coulomb counting using the current capacity estimate, and both estimates are updated periodically by a sliding-window regression. We show that the identification is exact under a mild rank condition, that the series resistance is recovered at the first current jump, and that the online state and capacity estimates converge exponentially under verifiable excitation conditions. We also establish robustness of the online estimator under bounded process disturbances and measurement noise.

0.21

Exact model reduction by Lie symmetry groups

eess.SY ·2026-10-19 ·Hamed Taghavian, Jens Sjölund
similarity 0.53
Abstract

We develop a model-reduction technique based on Lie group theory for general engineering models described by a system of algebraic, ordinary, and/or partial differential equations with an arbitrary number of inputs, outputs, and constant parameters. The proposed method reduces the parameter space of these models without changing their external behavior, that is, their input-output maps. We apply this method to phase-field models used for high-fidelity simulations in electrochemistry to accelerate the analysis and design of metal-ion batteries.

0.24

System Identification for Nonlinear Stochastic State-Space Models Using Ensemble Kalman Inversion with Application to Lithium-Ion Batteries

eess.SY ·2026-10-19 ·Farzaneh Barat, Rachel Carter, Sara Wilson, Huijeong Kim, Xinfan Lin +1 more
similarity 0.52
Abstract · 16 pages, 8 figures, 3 tables

Nonlinear state-space system identification has attracted decades of interest, yet remains challenging because of the interplay among unknown parameters, nonlinear dynamics, and latent state variables. Its difficulty increases dramatically when the state and parameter dimensions increase. To address this challenge, we develop an ensemble Kalman inversion (EnKI)-based approach. This approach leverages EnKI to perform maximum a posteriori parameter estimation through successive local Gaussian approximations, enabling an iterative and incremental search for unknown parameters. The search combines Monte Carlo sampling with Kalman-type updates to evolve an ensemble of parameter samples, thereby offering empirical stability and the ability to handle strongly nonlinear models. The EnKI search is coupled with state estimation conditioned on the latest parameter estimates. This enables parameter identification along with latent state recovery. To improve scalability for large datasets, we further develop a cascaded EnKI (CasEnKI) method, which assimilates subdatasets sequentially to accelerate computation. We validate the proposed methods using a lithium-ion battery model with ten state variables and 18 unknown parameters. Simulation results show that the EnKI approach offers high identification accuracy and empirical stability in parameter search. Further, experimental results illustrate the computational efficiency and scalability of the CasEnKI method for large battery datasets.

0.12

Relative Discharge Stage (RDS) Classification: A Practical Indicator of Battery Discharge Progress

cs.LG ·2026-09-23 ·Khoa Tran, Tri Le, Hung-Cuong Trinh, Hung Tran-Nam
similarity 0.51
Abstract

Accurate remaining discharge time (RDT) prediction is challenging in real-world battery applications because future load profiles are unknown and highly dynamic. To address the uncertainty of continuous RDT regression, this paper introduces Relative Discharge Stage (RDS), a battery-management indicator that represents the remaining discharge condition using five interpretable classes: Normal, Good, Moderate, Low, and Recharge Required. Unlike state of charge (SOC), which reflects the current charge level, RDS characterizes the remaining discharge process without requiring future-current information during inference. A physics-informed RDS classification framework is proposed, combining SOC estimation with lightweight temporal learning. The SOC-estimation component includes second-order ECM state and terminal-voltage prediction, hysteresis and OCV temperature correction, core-temperature estimation, and AEKF state correction, supported by OCV evaluation, online STC-ECM parameter adaptation, and pretrained neural residual-voltage correction. The measured current, terminal voltage, surface temperature, and estimated SOC are arranged into a sliding observation window and processed by a lightweight temporal convolutional network. Experiments on two public lithium-ion battery datasets demonstrate robust RDS classification, with accuracy exceeding 80% under varying load and thermal conditions.

0.04

Regularised Iterative Generalised Least Squares with Optimal Selection of the Hyper-Parameter for Identifying Nonlinear Phenomenological Models

cs.LG stat.MEeess.SY ·2026-08-19 ·Mark Cary, Charles Bokor
similarity 0.51
Abstract · 18 pages, 5 figures, 2 tables

In some fields currently dominated by empirical approaches, such as state of health (SoH) prediction for lithium-ion batteries, phenomenological models motivated by quasi-physical thinking contain parameters to be estimated from experimental data. Often the structure of such models yields fully or partially confounded parameters, which are difficult or even impossible to estimate reliably. To preserve the desired model formulation and simultaneously improve the numerical conditioning for the problem we introduce a ridge regression scheme. An automated method is provided, based on information theoretic measures of model performance, which optimises the ridge regression hyper-parameter at each iteration. The formulae presented require fixed point iteration to solve for the hyper-parameter. Given a suitable starting value, analysis demonstrates convergence is very rapid. The optimal hyper-parameter selection mechanism is incorporated within an efficient regularised iterative generalised least squares mechanism, capable of fitting both heteroscedastic and serially correlated data as required. Simulation confirms the efficacy of the overall method.

0.35

Joint Remaining Useful Life Prediction and Capacity Estimation of Lithium-Ion Batteries Using Partial-Charging Data

cs.LG ·2026-09-18 ·Khoa Tran, Ho-Si-Hung Nguyen, Phone Wai Yan Moe, Hung-Cuong Trinh, Thi-Hoang-Giang Tran
similarity 0.50
Abstract

Joint remaining useful life (RUL) prediction and capacity estimation require representations of both gradual degradation and recent battery behavior. This paper presents a cross-expert framework using partial-charging measurements without requiring measured historical full-cycle capacity as an input. The RUL Expert captures long-term degradation from nominal 10-min segments sampled across a 30-cycle history, while the Capacity Expert characterizes recent battery behavior from statistical descriptors of nominal 40-min segments over ten consecutive cycles. Their complementary representations are integrated through feature-wise linear modulation for joint RUL and capacity prediction. A key contribution is a three-stage training strategy that progressively controls frozen and trainable components: supervised representation pretraining, independent expert pretraining, and final fusion training with both experts frozen. This staged optimization preserves expert-specific degradation knowledge while improving the balance between the two prediction tasks, with RUL treated as the primary prognostic objective. On two public battery-aging datasets, the reference configuration achieves mean RUL root-mean-square errors of 143.69 and 161.10 cycles and capacity errors of 12.36 and 7.28 mAh, respectively. On Dataset I, cross-expert fusion reduces both mean errors relative to either standalone expert. The proposed framework achieves the lowest reported RUL RMSE among the compared methods on both datasets while maintaining competitive capacity-estimation accuracy.

0.20

A Repeated Measurements Approach to $SoH$ Battery Modelling of Cyclic Aged Data in a Laboratory Environment

cs.LG stat.MEeess.SY ·2026-08-20 ·Mark Cary, Charles Bokor
similarity 0.50
Abstract · 17 pages, 9 figures, 2 tables

This document describes the application of a first order linearised nonlinear repeated measurements approach to the analysis of battery cell ageing profiles generated under controlled conditions in a laboratory. The primary advantage of the model is it reflects the obvious structure in the data. Consequently, it is a two-component of variance model: variation within ageing profiles (measurement noise) and variation among ageing profiles (test-to-test or cell-to-cell) variation. Novel regularised iterative generalised least squares parameter identification schemes, with optimal hyper-parameter re-estimation, are used to identify the hierarchical nonlinear model. The training data comprised $SoH$ profiles for 10 cells aged at various constant discharge and charge current cycles at a fixed chamber environmental temperature of 25 [$^\circ$C]. Each cell $SoH$ profile is modelled using a simple power law expression, whereas the variation in ageing parameters is modelled using a single knot cubic B-spline. $SoH$ is accurately predicted to $\pm 0.191\%$ for $SOH \in [0,20]$.

0.24