CS Paper Radar

Towards Autonomous Bricklaying Using Boston Dynamics Spot

Karl-Johan Sorensen, Nico vom Hofe, Frank H. P. Fitzek

cs.RO ·submitted 2026-10-20 01:42 UTC · v1
published

Abstract

Mobile legged robots offer unique advantages for on-site construction, including the ability to traverse unstructured terrain, climb stairs, and operate independently between spatially separated work zones. This paper presents a proof-of-concept system for autonomous brick stacking using a Boston Dynamics Spot quadrupedal robot equipped with a manipulator arm. The system operates between a supply area and an assembly area, using AprilTag fiducials for localization and autowalk missions for navigation. Target brick positions and orientations are specified in CAD software and exported directly for robotic execution. We evaluate placement accuracy through ten repeated assemblies of a curved four-layer wall comprising 14 wooden bricks. Results show mean translation errors below 10 mm and mean yaw errors below 1.5 degrees, while the overall RMSE across all runs is 27.72 mm (translation) and 2.06 degrees (rotation). The system was also tested outdoors with stairs between the two areas. The workflow is modular and easily extendable to different wall geometries.

Comment
8 pages. Published in the Proceedings of the 43rd International Symposium on Automation and Robotics in Construction (ISARC 2026), Singapore
Journal ref
Proc. 43rd Int. Symp. Automation and Robotics in Construction (ISARC 2026), Singapore, 2026, pp. 398-405
DOI
10.22260/ISARC2026/0052

Closest papers

Nearest neighbours by meaning across the whole index.

RAEM: Robust Autonomous Exploration for Multi-Floor Environments with a Quadruped Robot

cs.RO ·2026-08-26 ·Zikang Yuan, Yuan Ren, Yian Wang, Yixue Wang, Enze Fang +8 more
hot direction similarity 0.57
Abstract · 21 pages, 23 figures

In this paper, we propose RAEM, a robust autonomous exploration framework for quadruped robots operating in multi-floor environments. Most existing ground-robot exploration approaches rely on planar traversability representations, which cannot adequately represent the overlapping structures and cross-floor connectivity of multi-floor buildings. Although tomography-based representations provide effective traversability modeling for multi-floor navigation, maintaining a global tomography map incurs substantial computational overhead for online exploration with frequent replanning. Moreover, sparse and fragmented LiDAR observations in stairwells can degrade local traversability estimation, leading to irregular viewpoint placement and temporary topological disconnections. To address these challenges, RAEM adopts a hybrid local-global traversability representation, in which a local tomography map and an explicitly categorized local 3D grid map are used for online terrain analysis and connectivity evaluation, while an elevation-aware global topological graph is incrementally constructed from these local spatial representations for efficient cross-floor exploration planning. We further introduce a staircase center alignment strategy to reduce abrupt yaw variations during climbing and a dual path searching mechanism to recover guidance paths when the global topology is locally disconnected. Extensive simulation and real-world experiments demonstrate robust and computationally stable autonomous exploration across multi-floor structures, including continuous exploration of a five-floor stairwell.

0.32

ClimbLab: MATLAB Simulation Platform for Legged Climbing Robotics

cs.RO ·2026-10-07 ·Kentaro Uno, Warley F. R. Ribeiro, Yusuke Koizumi, Keigo Haji, Koki Kurihara +2 more
publishedhighly cited similarity 0.56
Abstract · Author's version of a manuscript in the proceedings of CLAWAR 2021. The final published version is available at: https://doi.org/10.1007/978…

This paper presents an open-sourced MATLAB simulation and analysis platform dedicated to legged climbing robots. This simulator enables the design of any limbed robotic system as an articulated multi-body with a floating base and simulates it walking and climbing in an arbitrary environment. The main variable environmental parameters are inclination, gravity, and ground stiffness, and any point cloud can be installed as the terrain map. Furthermore, the simulator employs a rigid body dynamics engine. This paper first describes the simulator structure, and the computational flow and next presents the representative simulation examples where quadrupedal robots assumed gripping on the wall or climbing on the steep slope.

0.67

A comparative study on the accuracy & repeatability of mobile robotic platforms for the delivery of precision NDE measurement

cs.RO ·2026-09-03 ·SeyedMohammadAmin Nabi Pour, S. Gareth Pierce, Randika Vithanage, Ehsan Mohseni, David Carswell +1 more
similarity 0.56
Abstract

Mobile robotic platforms offer a flexible alternative to fixed manipulators for non-destructive evaluation (NDE) of large aerospace structures, but their base-positioning accuracy and how that accuracy should inform deployment have not been assessed under a common, externally referenced protocol. This work presents a laser tracker-based evaluation workflow (ground truth approximately 6 micrometers) that measures the static and segmented trajectory positioning accuracy of five commercial mobile platforms (KUKA KMP-1500, KUKA KMR, MiR250, Boston Dynamics Spot, Clearpath Husky) under a common protocol. A coupled multi-corner calibration recovers the laser-to-robot transformation and reflector offsets; ordinary least squares over all poses is used, with robust estimation retained only as a blunder check. Static positioning accuracy ranged from a median of 8.2 mm (KMP-1500) to 63.5 mm (Spot), with the wheel-odometry-only Husky uncalibratable. Dynamic path following was characterised by cross-track error; the component was insensitive to temporal alignment, which ranged from 6.9 mm (KMP-1500) to 112.1 mm (Spot). Both accuracy and calibratability tracked localisation capability, from the newest LiDAR SLAM platform to map-free visual odometry. No configuration meets the 0.2 to 1.0 mm aerospace NDE tolerance from the base alone; the results are framed as a design input that sizes the supplementary sensing each platform requires: roughly one order of magnitude for the best platform and nearly two for the worst, providing a reproducible basis for platform selection rather than a feasibility claim.

0.16

Walking on Roofs: Exploring the Potential of Walking Robots for Construction Work on Roofs

cs.RO ·2026-10-08 ·Bjoern-Felix Dettmar, Arne Roennau
similarity 0.55
Abstract · Preprint of paper which appeared in the Proceedings of CLAWAR 2026, 29th International Conference on Climbing and Walking Robots and the Sup…

This paper investigates the feasibility of deploying quadruped walking robots for the automation of work in roof environments. While quadrupeds have demonstrated versatility across various domains, their large-scale deployment remains limited, partly due to lack of application-specific designs. Roof environments represent a novel and unexplored use case, combining high safety risks for human workers with repetitive, strenuous tasks that could benefit from robotic assistance. A dedicated test rig of a roof's surface was designed to evaluate the baseline performance of a commercial quadruped, the \emph{Unitree Go2}, in this new environment. Experiments revealed that standard ball feet are inherently inadequate for locomotion on sloped roofs: slippage increased quadratically with incline angle, get-up and lie-down sequences were only possible on small inclines, and critical failures already occurred regularly on moderate inclines of 25°. This work provides the first systematic assessment of quadruped locomotion in roof environments, highlighting both the potential and the current limitations of this application and establishes a baseline for future research. Effective solutions will require a combination of task-oriented foot designs, advanced contact mechanics and environment-specific control strategies, such as reinforcement learning for roof-adapted gaits.

0.24

BrickWright: Agentic Creation of Physically Feasible Brick Builds

cs.CV ·2026-10-22 ·Ava Pun, Kevin Dai, Sally Chen, Maxwell Jones, Ruixuan Liu +5 more
positioncode/data similarity 0.55
Abstract

Frontier coding agents are becoming increasingly adept at 3D modeling. Yet, they still face challenges when building objects meant to be assembled in the physical world, often creating invalid assemblies with floating, colliding, or disconnected parts. We argue that providing agents with tools for assembling builds and verifying their physical feasibility is sufficient for them to produce physically valid assemblies that still adhere to input prompts. Focusing on the domain of LEGO brick builds, we present BrickWright, a framework for generating physically feasible brick builds from text or image prompts using pre-trained agents, where a build is physically feasible if it uses only real parts, has no colliding or floating parts, and forms a connected structure if possible. BrickWright guides agents to create builds by writing code with BrickLayer, a Python toolkit with two main components: an ergonomic brick assembly API that halves inference cost compared to working in raw LDraw, and a validator that provides feedback on physical feasibility. Whereas baseline agents achieve physical validity rates ranging from only 9% (GPT-6 Luna) to 69% (GPT-6 Astra), BrickWright-guided agents achieve 100% validity on a sample of 512 prompts, while improving prompt adherence for lightweight agents and maintaining it for stronger agents. Additionally, they outperform specialized models on the text-to-brick task. Code is available on our project page: https://avalovelace1.github.io/brickwright/

0.36

Make it Walk: Computational Design of LEGO Walkers

cs.RO ·2026-10-21 ·Siqi Li, Fancheng Gao, Chi-Wing Fu, Peng Song
similarity 0.53
Abstract

LEGO walkers are walking automata constructed from modular LEGO Technic bricks. They exhibit intriguing locomotion and are also highly reconfigurable through the modular Technic bricks, making them widely applicable in education, recreation, and robotics research. However, existing LEGO walkers are designed mostly by reusing existing single-actuator walking mechanisms. Although the locomotion is stable, their fixed walking gaits limit their adaptability and versatility. This paper presents the first computational solution capable of designing LEGO walkers that not only walk stably, but also support a variety of walking gaits. Our idea is twofold. First, we control the foot motion trajectory of each leg mechanically via a specifically-designed gear-linkage mechanism, in which we incorporate a pair of 3D-printed non-circular gears to work with a LEGO Technic mechanism. Second, we drive each leg by an independent motor and synchronize the timings of multiple leg motions via a simple yet adaptable control algorithm, enabling stable and versatile locomotion. Importantly, we take this modeling as a foundation to co-design the morphology and control of the LEGO walkers to meet the target locomotion and appearance. Leveraging our approach, we created a variety of LEGO walkers, demonstrating various walking gaits and appearances, and fabricated some of them to show their locomotion capability in the real world.

0.22

DailyBrick: Language-Guided Synthesis of Brick Assembly Instructions

cs.RO cs.CV ·2026-11-17 ·Hang Zhang, Qijian Tian, Yuan Xie, Xuhong Wang, Xin Tan
similarity 0.52
Abstract

Generating a LEGO model from a user request is more than a plausible 3D shape generation. LEGO models require physical support per brick, and each brick should be placed unblocked. Current methods address this issue by training an expert large language model. We reduce the problem of generating extremely long context on all brick connections to that of writing a program that builds LEGO models like a human, considering each intermediate step could be executed. We introduce DailyBrick , a multi-stage agentic system that produces a LEGO model together with a brick-by-brick assembly instruction for human building and robot assembly. We design a multi-stage harness with roles to help LLMs generate more effectively. A versioned construction SDK compiles multi-level decisions, from semantic subparts to individual bricks, into canonical operations. An external Meta-Reviewer agent replays and inspects the generated package, verifies the model and its construction process, identifies failures, traces them to the responsible stage, and routes them to bounded repairs or to editable candidates for later skill or tool updates. Extensive experiments demonstrate that DailyBrick generates LEGO models based on simple user requests better than recent agentic systems, and show its utility in downstream applications such as robot manipulations on model assembly from instructions and brick sets (https://SpatialAgent.github.io/DailyBrick/).

0.24

OmniQuad: a Wheeled-Legged Hybrid Robot with Omnidirectional Wheels

cs.RO ·2026-10-28 ·Francesco Iotti, Alok Ranjan, Franco Angelini, Manolo Garabini
publishedhighly cited similarity 0.52
Abstract

Combining wheeled and legged locomotion within a single robotic platform offers the potential to harness the advantages of both systems. The development of such hybrid systems remains an active area of research. While legged robots exhibit remarkable adaptability for traversing uneven and rugged terrains, their relatively low speed limits their practicality in indoor environments. Conversely, wheeled robots demonstrate higher efficiency on flat surfaces but often encounter difficulties when navigating obstacles such as steps. This paper introduces OmniQuad, a novel hybrid robot that integrates mecanum wheels with legged locomotion to exploit the benefits of both modalities. Mecanum wheels provide omnidirectional mobility, enhancing the robot's manoeuvrability by enabling agile movement in confined spaces and the ability to maintain a consistent orientation during task execution. In this work, we first present the design of a custom wheeled-foot featuring mecanum wheels. Subsequently, we describe the complete robot assembly, comprising these wheeled feet and EM-Act actuators. Finally, we detail the control scheme developed to govern the OmniQuad and evaluate its performance through experimental trials conducted in both indoor and outdoor environments.

0.64