CS Paper Radar

Walking on Roofs: Exploring the Potential of Walking Robots for Construction Work on Roofs

Bjoern-Felix Dettmar, Arne Roennau

cs.RO ·submitted 2026-10-08 16:36 UTC · v1

Abstract

This paper investigates the feasibility of deploying quadruped walking robots for the automation of work in roof environments. While quadrupeds have demonstrated versatility across various domains, their large-scale deployment remains limited, partly due to lack of application-specific designs. Roof environments represent a novel and unexplored use case, combining high safety risks for human workers with repetitive, strenuous tasks that could benefit from robotic assistance. A dedicated test rig of a roof's surface was designed to evaluate the baseline performance of a commercial quadruped, the \emph{Unitree Go2}, in this new environment. Experiments revealed that standard ball feet are inherently inadequate for locomotion on sloped roofs: slippage increased quadratically with incline angle, get-up and lie-down sequences were only possible on small inclines, and critical failures already occurred regularly on moderate inclines of 25°. This work provides the first systematic assessment of quadruped locomotion in roof environments, highlighting both the potential and the current limitations of this application and establishes a baseline for future research. Effective solutions will require a combination of task-oriented foot designs, advanced contact mechanics and environment-specific control strategies, such as reinforcement learning for roof-adapted gaits.

Comment
Preprint of paper which appeared in the Proceedings of CLAWAR 2026, 29th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Cranfield University, Cranfield, Beford, United Kingdome, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Learning Slope-Adaptive Whole-Body Locomotion for Humanoid Robots in Roofing Construction

cs.RO ·2026-09-17 ·Songyang Liu, Shuai Li
hot direction similarity 0.65
Abstract

Roofing requires workers to coordinate locomotion, balance, and work-related body motions on pitched surfaces, creating a challenging application for humanoid robots. Directly retargeted human demonstrations, however, may preserve motion appearance while placing the robot's feet or hands incorrectly relative to the roof. This study presents a task-semantic scene-grounded framework for learning roofer-style whole-body motions on a Unitree G1. Human demonstrations are captured using a tracking system and retargeted to the robot, while a metric roof model supplies the spatial reference unavailable from the tracking system. A trajectory-level optimization grounds inferred support contacts and annotated work relations to the roof, and execution-aware reinforcement learning encourages the resulting policy to preserve these relations under dynamic tracking errors. The framework is evaluated through a multi-motion tracking study, a roof-pitch coverage matrix, a five-way nailgun ablation, cross-task experiments on hammering and lateral pushing, and comparisons with pure reinforcement learning and zero-shot teleoperation. Our method enables the robot to satisfy support, work-clearance, and nonpenetration criteria across all evaluated seeds. Across nailgun, hammering, and pushing, it achieves work-clearance errors between 0.256 and 0.531 cm and 3/3 successful evaluations per task. Physical experiments reproduce uphill walking, nailgun, hammering, and bending motions with mean base-frame motion errors below 80 mm. These findings establish scene-grounded human motion learning as a promising basis for construction-oriented humanoid motion primitives.

0.28

ClimbLab: MATLAB Simulation Platform for Legged Climbing Robotics

cs.RO ·2026-10-07 ·Kentaro Uno, Warley F. R. Ribeiro, Yusuke Koizumi, Keigo Haji, Koki Kurihara +2 more
publishedhighly cited similarity 0.64
Abstract · Author's version of a manuscript in the proceedings of CLAWAR 2021. The final published version is available at: https://doi.org/10.1007/978…

This paper presents an open-sourced MATLAB simulation and analysis platform dedicated to legged climbing robots. This simulator enables the design of any limbed robotic system as an articulated multi-body with a floating base and simulates it walking and climbing in an arbitrary environment. The main variable environmental parameters are inclination, gravity, and ground stiffness, and any point cloud can be installed as the terrain map. Furthermore, the simulator employs a rigid body dynamics engine. This paper first describes the simulator structure, and the computational flow and next presents the representative simulation examples where quadrupedal robots assumed gripping on the wall or climbing on the steep slope.

0.67

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.64
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34

ROOF: Learning Humanoid Fall Recovery under Overhead Constraints

cs.RO ·2026-10-30 ·Yidan Lu, Jiayuan Yu, Zongrui Cai, Jingwen Sun, Jinrui Han +3 more
code/data similarity 0.58
Abstract · 8 pages, 4 figures

A fallen humanoid beneath an overhead obstacle faces a coupled recovery problem. It must create clearance while organizing support for a stable rise, since attempting to stand before making room can further increase obstruction. We introduce a reinforcement learning method with contact-supported geometric escape guidance, which rewards incremental reduction of robot-obstacle overlap without prescribing an escape path. To achieve this, a learned motion prior, together with posture-dependent support and joint-stall costs, is proposed to shape a single policy that learns when to clear the obstacle, how to establish support, and when to complete the rise, all using proprioception alone. In simulation, it recovers in 88.5% of trials beneath plates that can only be lifted, compared with 18.9% without geometric guidance, and in 98.6% of trials beneath free plates with randomized size, mass and placement. On a Unitree G1, the deployed policy recovered in 95 of 150 attempts across seven real-world obstacle scenes, including furniture and multi-object arrangements absent from training. Project page: https://lu-yidan.github.io/ROOF/

0.25

Contact as a Decision Variable: Capability-Tradeoff Contact Selection for Legged Loco-Manipulation

cs.RO ·2026-09-24 ·Al Jaber Mahmud, Shuai Li, Xuan Wang
similarity 0.57
Abstract · 9 pages, 6 figures

In this paper, we study the joint selection of an environmental support contact and a whole-body configuration for a prescribed loco-manipulation task. A contact may provide greater physical support while restricting the motion required for the task. We formulate this problem through three capability measures: residual wrench, end-effector reach, and base mobility available after satisfying the task requirements, and we balance them against contact acquisition cost. Evaluating these capabilities for every candidate requires repeated whole-body optimizations. To reduce this computational cost, we propose Capability-Tradeoff Contact Selection (CTCS). CTCS screens candidates for contact and task feasibility, groups similar candidates within each surface, and predicts their capabilities from exact anchor evaluations using local sensitivity analysis. It checks these predictions through selective exact evaluations, ranks candidates by capability, and evaluates a shortlist exactly for final selection. We evaluate CTCS in simulations and hardware experiments using a Unitree Go2 quadruped with an AgileX NERO arm across $392$ task conditions with nine available support surfaces. Results show that CTCS outperforms ground-only and fixed-contact support, as it can select support surfaces that provide favorable capability trade-offs for the task. Compared with evaluating every candidate exactly, CTCS achieves approximately $3\times$ speedup while closely matching the resulting mean objective value.

0.56

Reinforcement Learning Based Multi-Terrain Adaptive Whole-Body Control for a Quadruped Manipulator

cs.RO ·2026-10-16 ·Yanzhou Jin, Fei Suo, Chang Liu, Yasuhisa Hasegawa, Liming Chen +3 more
top venue similarity 0.56
Abstract

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to coordinate locomotion and manipulation while preserving task-consistent end-effector behavior. A lightweight quadruped manipulator platform is further developed to validate the proposed framework on a small-scale quadruped system. Real-world experiments demonstrate successful deployment on complex terrains such as slopes up to 30 degrees, stairs, and deformable terrain. These results demonstrate the feasibility of deploying learned whole-body control policy for quadruped loco-manipulation in real-world environments and highlight the importance of task-consistent whole-body coordination for terrain-adaptive loco-manipulation.

0.23

Towards Autonomous Bricklaying Using Boston Dynamics Spot

cs.RO ·2026-10-20 ·Karl-Johan Sorensen, Nico vom Hofe, Frank H. P. Fitzek
published similarity 0.55
Abstract · 8 pages. Published in the Proceedings of the 43rd International Symposium on Automation and Robotics in Construction (ISARC 2026), Singapore

Mobile legged robots offer unique advantages for on-site construction, including the ability to traverse unstructured terrain, climb stairs, and operate independently between spatially separated work zones. This paper presents a proof-of-concept system for autonomous brick stacking using a Boston Dynamics Spot quadrupedal robot equipped with a manipulator arm. The system operates between a supply area and an assembly area, using AprilTag fiducials for localization and autowalk missions for navigation. Target brick positions and orientations are specified in CAD software and exported directly for robotic execution. We evaluate placement accuracy through ten repeated assemblies of a curved four-layer wall comprising 14 wooden bricks. Results show mean translation errors below 10 mm and mean yaw errors below 1.5 degrees, while the overall RMSE across all runs is 27.72 mm (translation) and 2.06 degrees (rotation). The system was also tested outdoors with stairs between the two areas. The workflow is modular and easily extendable to different wall geometries.

0.34

Task-Driven Closed-Loop Design Optimization of Passively Morphing Quadrotors for Contact-Mediated Narrow Gap Traversal

cs.RO ·2026-11-06 ·Etor Arza, Luca Girardi, Gabriel Maquignaz, Javier Paez, Stefan Leutenegger +2 more
code/data similarity 0.55
Abstract · Video: https://youtu.be/xGkEtl6-vCA. Code: https://github.com/ntnu-arl/soft-quadrotor-optimization

Aerial robots operating in cluttered environments may encounter openings narrower than their nominal width. Existing passively morphing drones reduce their width upon traversal, but they typically involve human-made designs, which can struggle to find the right balance among folding ratio, flight efficiency, and control tracking performance. We introduce a closed-loop design method that jointly optimizes quadrotor geometry and the torque-deflection response of two passively folding arms driven by the success rate in simulation for contact-mediated gap traversal. An optimization algorithm samples candidate designs that are evaluated in a contact-based simulation of the traversal task, where the task success rate is used as a feedback signal to sample progressively better designs over time. The resulting prototype passively reduces its width from 31.3 to 14.1 cm and traverses a 15 cm wide opening at a 2 m/s reference speed. It also tolerates gap approach-angle errors of up to 30 degrees and folds through a 40 cm long confined passage. Compared to a rigid twin, the soft configuration adds only 2 mm of position RMSE and less than 1% electrical power during contact-free flight. These results show that task-driven closed-loop design optimization can produce passively morphing airframes that are compact under contact, tolerant to approach error, and effectively rigid during nominal flight.

0.28