CS Paper Radar

CW-WAM: A Structured Contact-Wrench World Action Model for Force-Sensitive Manipulation

Houzhu Ding, Xinda Qi, Luqi Wang, Ming Yang

cs.RO ·submitted 2026-10-21 17:55 UTC · v1

Abstract

Force-sensitive manipulation requires contact and load information that is not provided explicitly by visual observations. We present CW-WAM, a world action model that jointly predicts video, motion, and contact wrench. Inspired by hybrid motion-force control, it contains a unified interaction module that treats both motion and contact wrench as modeling targets and predicts time-aligned motion-wrench chunks as control references. A pair-causal attention mechanism structures the motion-wrench dependencies, while a long fixed-length wrench memory retains past interaction information. The predicted wrench chunk acts as a force reference for a 20-Hz outer-loop admittance controller within a slow-fast control system that maintains force feedback and smooth motion between model queries. CW-WAM improves contact prediction and increases the insertion success rate from 25% to 70% for square pegs with 1-mm clearance per side and from 40% to 95% for power adapters, compared with WAM without wrench input. It also improves lifting-height accuracy across different loads. Our framework with an admittance controller reduces force-reference RMSE from 4.8 to 2.7 N for peg insertion and from 2.0 to 1.3 N for wiping, respectively, with smaller force fluctuations during successful execution. Project website: https://cw-wam-project.github.io/

Comment
Project website: https://cw-wam-project.github.io/

Closest papers

Nearest neighbours by meaning across the whole index.

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

cs.RO ·2026-09-29 ·Johannes Hechtl, Yannik Blei, Simon Ball, Reihaneh Mirjalili, Michael Krawez +3 more
similarity 0.70
Abstract

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

0.16

FR-VLA: Implicit Force Reasoning VLA for Contact-Rich Manipulation

cs.RO ·2026-10-19 ·Jiaju He, Zhiyuan Yang, Ruyang Han, Jiahong Tang, Zhiping Lin +1 more
published similarity 0.70
Abstract · Accepted to CoRL 2026

Integrating force awareness into Vision-Language-Action (VLA) models involves not merely encoding wrench measurements as an additional modality, but determining when and how strongly physical interaction should influence robot action generation. Existing VLAs that use force typically inject it through a fixed pathway, without explicitly determining when it is relevant to the current action. This calls for an intermediate force relevance mechanism inside the VLA, in which visual-language context estimates the relevance of physical feedback to the current task before force enters the action pathway. FR-VLA addresses this gap with a Vision-Language Force-Reasoning Model that uses learnable force query tokens to derive a force admission signal grounded in visual-language context, and uses this signal to modulate an external tokenized force pathway for action generation. In real-world experiments on five contact-rich tasks across two robotic platforms, FR-VLA achieves the highest mean success rate over six evaluated stages, and trajectory visualizations show that its force admission varies with the interaction phase.

0.24

Imp-ACT: Adaptive Impedance Control and Action Chunking with Transformers to Learn Contact-Rich Manipulation from Demonstrations

cs.RO ·2026-09-25 ·Luca Zanetti, Doganay Sirintuna, Idil Ozdamar, Pietro Balatti, Heng Zhang +1 more
similarity 0.69
Abstract · 9 pages, 5 figures, submitted to IEEE International Conference on Robotics & Automation 2027, for associated video see https://youtu.be/iAu_…

Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.

0.32

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.69
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

FP2: Equipping Robotic Foundation Models with Force Control

cs.RO ·2026-09-29 ·Hongjie Fang, Shirun Tang, Junjian Hu, Shidong Zhang, Derek Zhang +6 more
similarity 0.69
Abstract

Robotic foundation models (RFMs) are increasingly capable of general-purpose manipulation, yet reliable physical interaction remains challenging in contact-rich settings. We present FP2, a lightweight downstream interface that equips task-adapted RFMs with explicit force control while preserving their action-generation capability. FP2 adopts an action-regulation decomposition: the task-adapted RFM serves as a foundation policy responsible for task-level action generation, while a high-frequency force control policy focuses solely on interaction regulation. To condition force regulation on the ongoing manipulation, FP2 compresses foundation-policy contextual representations and combines them with wrench and proprioceptive histories to predict structured force-control parameters. We evaluate FP2 with four RFM backbones across four real-world contact-rich manipulation tasks. FP2 consistently improves task performance and force regulation quality over the corresponding foundation policies, while comparing favorably with representative force-aware and force-control baselines. Ablations further show that foundation-policy context and physical feedback are complementary for effective force regulation, while preserving foundation-policy action generation improves both efficiency and novel-object generalization. Project website: http://force-policy.github.io/fp2

0.47

Facet-0: A Robotic Foundation Model for Contact-Rich Precise Manipulation

cs.RO cs.LG ·2026-09-01 ·Haoyuan Deng, Haichao Liu, Wenkai Guo, Yuan Ling, Zaijia Yang +4 more
code/data similarity 0.68
Abstract · Project page: https://pine-lab-ntu.github.io/facet-0/

Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.

0.51

TAO-Force: Unifying Force-Aware Perception and Fast-Slow Control for Contact-Rich Manipulation

cs.RO ·2026-09-16 ·Bohan Gan, Xuanzhang Wen, Yongsheng Zhao, Baoping Cheng, Wenhe Jia +6 more
similarity 0.68
Abstract

Vision-Language-Action (VLA) models have demonstrated strong performance across diverse robotic manipulation tasks, yet their predominantly vision-centric perception and position-controlled execution remain insufficient for contact-rich manipulation. Visual observations alone often provide limited evidence of contact onset and interaction magnitude, while position-control policies cannot respond compliantly to rapidly changing contact dynamics. To bridge both the perception and control gaps, we propose TAO-Force, a force-conditioned VLA framework that combines force-aware policy learning with contact-regulated execution. For force-aware perception, TAO-Force introduces Force-conditioned Feature-wise Linear Modulation (F-FiLM) to inject encoded force feedback into the representations of a frozen pretrained visual-language backbone while preserving its semantic priors. For responsive control, it employs a contact-gated fast-slow architecture, with a slow position-control branch tracking nominal trajectories during non-contact phases and a fast admittance-control branch regulating physical interaction during contact phases. Detailed analyses on a force-perception task and real-world evaluations across four contact-rich manipulation tasks validate the effectiveness and robustness of TAO-Force.

0.20

FWBC-VLA: Force-Aware Whole-Body Compensation for Contact-Rich Loco-Manipulation

cs.RO cs.AI ·2026-09-03 ·Yutian Zhang, Siyuan Ma, Liwen Yang, Yang Li, Ce Hao +4 more
similarity 0.68
Abstract · 9 pages, 6 figures

Contact-rich loco-manipulation requires a bridge between semantic action generation and physical interaction control. Existing Vision-language-action (VLA) models generate task-level actions from visual and linguistic observations, but cannot interpret the physical interactions induced by those actions. While the whole-body control (WBC) policy can stabilize the robot, it cannot distinguish task-relevant interaction forces from forces induced by external disturbances during manipulation. Although force/torque sensors provide direct measurements of physical interactions, retrofitting them entails additional hardware costs and substantial integration effort, particularly for platforms not designed with sensor integration in mind. To address this problem, we propose FWBC-VLA, a force-aware framework that bridges task-level VLA action generation and low-level whole-body compensation control for wheeled-legged robots. First, we introduce HSR-Force, a sensorless residual-torque estimator for inferring contact strength and its temporal variation. These contact estimates are then encoded as tokens and injected into the VLA action expert during action decoding, enabling the policy to perceive contact onset, sustained loading, and release. For loco-manipulation tasks, all parameters of the pretrained VLA backbone are fine-tuned on our WL\&Arm Dataset, which comprises more than 5,000 episodes. Moreover, the robot's proprioceptive state, the Jacobian-derived body-frame force estimate, and the estimated contact state are jointly fed into a compensation generator to produce corrective actions. The manipulation-centric actions are subsequently combined with the corrective actions and passed to the WBC policy for execution. Real-world experiments on whiteboard wiping and door opening with a door closer demonstrate the effectiveness of our FWBC-VLA in contact-rich loco-manipulation.

0.46