CS Paper Radar

Space Solar Applications: Simulation with MATLAB-Simulink Environment and Transmission of Solar Power Generated

Ferhat S. Demirci, Murari Koushik Muthu Kannapiran

eess.SY ·submitted 2026-10-22 16:49 UTC · v1
surveyunusual

Abstract

In this paper a photovoltaic (PV) array suitable for use in outer space is simulated in the MATLAB/Simulink environment. The simulation of the PV array is first carried out with maximum power point tracking (MPPT) and then without MPPT. In a second step, the response of the system to different irradiation levels is observed. A brief overview of the transmission of solar power generated in space down to the earth via microwaves is also given. Selected simulation results are provided for a comparative study of both cases.

Comment
6 pages, 16 figures, 4 tables. Work done at Illinois Institute of Technology, 2010

Closest papers

Nearest neighbours by meaning across the whole index.

Power from Space: Coordinated Satellite Charging for Off-Grid Wireless Systems

eess.SP ·2026-08-26 ·Osmel M. Rosabal, Amirhossein Azarbahram, Mateen Ashraf, Mohammad Shehab, Abdul Basit Khattak +2 more
published similarity 0.45
Abstract · 7 pages, 4 figures, 2 tables, submitted to IEEE Internet of Things Magazine

Satellite-enabled wireless power transfer (WPT) may be a transformative solution for charging Internet of Things (IoT) devices in off-grid scenarios where traditional technologies struggle to efficiently meet urgent energy demands. In this article, we review the advantages and limitations of microwave-based long-distance charging for satellite-enabled WPT. We then introduce our vision of coordinated space-based WPT, where multiple satellites jointly serve networks of ground devices. Potential use cases are presented highlighting application requirements. We evaluate the average received power at the target locations using two coordination schemes and perform a statistical characterization of the power spillover on undesired locations. We also shed light on the performance of inter-satellite laser WPT for different operating distances and transmit-receive apertures of the peer satellites. Moreover, we explore the integration of metasurfaces on satellite apertures and ground networks to boost energy conversion efficiency, scalability, and beam management. Finally, we outline relevant challenges and research directions towards implementing our vision.

0.36

Development of an EMT model of the Balearic power system

eess.SY ·2026-09-02 ·Yousef Pipelzadeh, Dharshana Muthumuni, Farid Mosallat, Javier Renedo, Silvia Sanz Verdugo +3 more
similarity 0.43
Abstract

The Balearic Islands are striving to achieve 100% renewable energy, which poses new challenges in operating the power system securely and reliably. With a higher integration of inverter-based resources (IBRs) and a reduced presence of conventional synchronous generators, the system strength, particularly short circuit levels, becomes weaker and more susceptible to disturbances; and the total inertia of the system becomes lower. Technology enablers are planned to achieve energy transition in the Balearic power system: a new 2x200 MW VSC-HVDC link (bipole with metallic return), Synchronous Compensators (SC) and Battery Energy Storage Systems (BESS), as fully-integrated network components. Detailed ElectroMagnetic Transient (EMT) simulation studies may be needed to analyse stability of the system, due to the high amounts of power-electronics devices in the system. This paper describes the implementation of an EMT model of the Balearic power system.

0.22

Constrained Grid-Forming Control for Photovoltaic Systems: A Control Barrier Function Approach

eess.SY ·2026-10-13 ·Amir Afshari, Dominic Groß
similarity 0.42
Abstract

This paper leverages control barrier functions (CBFs) to systematically account for constraints of voltage source converters (VSCs) and photovoltaic (PV) resources in grid-forming (GFM) control. The proposed control combines (unconstrained) dual-port GFM control with control barrier functions (CBFs) to ensure reliable and safe operation of a GFM PV system under grid faults, sudden changes in irradiance, and load perturbations. First, CBFs are used to encode physical and operational limits of the PV system, namely current and voltage limits at its ac and dc terminals. Then, CBFs are used to restrict the dynamics of dual-port GFM control to within the VSC and PV limits during both transient and steady states. To this end, a cost function is defined that encodes trade-offs between forming the ac voltage phase angle/frequency and voltage magnitude under constraints. Then, real-time optimization is used to make the least modification, as measured by the cost function, to the (unconstrained) dual-port GFM control state to remain within the safe set encoded by the CBFs. Finally, the performance of the developed constrained GFM control is evaluated through EMT simulations in MATLAB/Simulink.

0.28

Comparative Assessment of Frequency Scans using EMT and RMS Models

eess.SY ·2026-08-27 ·Clea Bürgel, Gustavo Valverde, Gabriela Hug
similarity 0.41
Abstract

Frequency scans of inverter and grid impedances are crucial for assessing small-signal stability and system strength in inverter-dominated power systems. This paper compares frequency-scan results for several generating units, including a synchronous generator, grid-following, and grid-forming inverters, using fully dq electromagnetic transient and root-mean-square (RMS) models in Simulink. The scans are performed for the same device rating and operating point. Frequency scans and time-domain simulations show that the RMS models are valid only at low frequencies. We find that the current-controlled grid-forming inverter is more difficult to represent in RMS than the voltage-controlled grid-forming inverter. However, including the inner voltage-control loops improves the accuracy of the RMS representation. The paper also investigates the influence of generator and grid impedance on the total system impedance seen from the point of common coupling and relates the oscillatory modes and zeros of the system to peaks and dips in the first and second singular values of the system impedance, respectively.

0.22

GFM Control Automatic Compliance Toolbox

eess.SY ·2026-11-08 ·Tejas Kunbi, Rahul Rane, Dan Wu, Aleksandra Lekić
similarity 0.40
Abstract

The increasing penetration of converter-interfaced generation reduces system inertia, short-circuit strength, and voltage support. European grid codes, including the ENTSO-E Network Code on Requirements for Generators and the ACER Demand Connection Code, now define disturbance-based validation procedures for grid-forming (GFM) generation and converter-based demand. Commercial RMS tools, however, lack an integrated workflow aligned with these recent requirements. This paper presents an automated Python-PowerFactory compliance toolbox and an RMS test bench for a co-located system comprising a 1 MW GFM photovoltaic (PV) plant, a 0.3 MW GFM battery energy storage system (BESS), and a 1 MW converter-interfaced dynamic load at a 20 kV point of common coupling fed from a 110 kV grid. Extended virtual synchronous machine models and a DCC-oriented load model are tested in batch, with results automatically extracted and plotted for assessment. Results show compliant RMS performance for the slower, electromechanical tests, while the paper identifies which tests require complementary electromagnetic transient (EMT) verification.

0.34

Information in Polarization, Energy from Optical Power: Stokes-Orthogonal Inter-Satellite Links

eess.SP ·2026-09-22 ·Meysam Ghanbari, Mohammad Taghi Dabiri, Mazen O. Hasna, Khalid A. Qaraqe
similarity 0.39
Abstract

Joint information and energy transfer over inter satellite free space optical links is commonly based on explicit resource splitting, which couples communication reliability and energy delivery. This paper proposes a constant total power Stokes orthogonal architecture that conveys information through polarization while preserving the received optical power for photovoltaic conversion. Complementary polarization branches support balanced information detection through their AC components, while their DC components drive matched multi junction photonic power converters. The developed framework jointly characterizes pointing impaired propagation, bit error rate, outage, and nonlinear harvested power. The analysis establishes that the two information symbols only exchange the branch powers, leaving the unordered input power pair unchanged. Hence, the total harvested energy remains symbol invariant even under nonlinear conversion, without an explicit information energy power split or linear efficiency approximation. Numerical results confirm the analytical model, with the closed form BER approximation remaining within 0.43 percent of the exact evaluation over the examined pointing conditions. Compared with ideal lossless power splitting, the proposed architecture avoids the conventional BER versus harvested power tradeoff and provides an analytical baseline for power neutral joint information and energy transfer in inter satellite optical links.

0.24

Investigation of RIS Integration in Satellite Systems Guided by ITU-R VSAT Radiation Diagram

eess.SP cs.IT ·2026-10-12 ·Symeon Vaidanis, Athanasios D. Panagopoulos
published similarity 0.39
Abstract · This work has been accepted for publication in ITU Journal on Future and Evolving Technologies

The introduction of Reconfigurable Intelligent Surfaces (RIS) technology marks a transformative era in modern communication systems, enhancing coverage and facilitating higher data transmission rates. While recent research has delved into the integration of RIS into satellite networks, a critical and practical gap persists concerning its implementation in the satellite-Very Small Aperture Terminal (VSAT) downlink, specifically amplifying contributions from the VSAT side. This paper addresses this gap by proposing a simple and engineering methodology to optimize RIS position and orientation, incorporating considerations for the antennas' radiation patterns and the system's topology to streamline optimization variables. The primary objective of this paper is to alleviate the double fading constraint in the reflect link without the need for active elements, achieved by leveraging the Fresnel zone of the RIS. The improvement power ratio depends on the frequency and the VSAT 's diameter. The results show that for a VSAT with diameter 1m the gain is up to 9dB at 2 GHz (S band) and up to 14dB at 4 GHz (C band). Additionally, the RIS channel equation is refined, encompassing the tropospheric attenuation and accounting for electromagnetic wave polarization.

0.58

Approximating Anisotropic Solar Radiation Pressure

eess.SY ·2026-11-18 ·Yasuhiro Yoshimura, Toshiya Hanada
publishedunusual similarity 0.37
Abstract · 33 pages, 21 figures, 4 tables. Accepted manuscript of the article published in Journal of Guidance, Control, and Dynamics

Solar radiation pressure (SRP) significantly influences satellite dynamics in high-altitude orbits, depending not only on the satellite's trajectory and attitude but also on its surface optical characteristics. Metallic surfaces, such as solar cells with periodic metal bars, exhibit anisotropic reflection that produces an anisotropic SRP. The difficulty in dealing with anisotropic SRP arises because anisotropic SRP does not have a general analytical solution, and accurate computation therefore requires numerical integration. An analytical formulation of anisotropic SRP is useful for stability analysis and controller design for satellites that exploit SRP. To this end, this paper derives an analytical approximation method to calculate the anisotropic SRP modeled with the Ashikhmin-Shirley model. The anisotropy is approximated using multiple spherical Gaussians. Because the product of spherical Gaussians is also a spherical Gaussian, anisotropic reflection can be expressed in an analytically tractable form. The approximation accuracy of the anisotropic SRP is numerically verified for two cases: weak anisotropy and strong anisotropy.

0.45