CS Paper Radar

Bracketing Shows the Way: Adaptive Multi-Exposure Policy as Input for Robust Visual SLAM

Olivier Gamache, Anthony Lavertu, David-Alexandre Duclos, Jean-Michel Fortin, François Pomerleau, Philippe Giguère

cs.RO ·submitted 2026-10-23 18:16 UTC · v1
code/data

Abstract

Rapid illumination transitions can disturb Visual SLAM (VSLAM) by saturating images before the Automatic Exposure (AE) policy adapts, removing the visual correspondences needed to maintain tracking. Our proposed methods mitigate this disturbance at two levels: B-Adapt acquires adaptive exposure brackets to cover the scene dynamic range while promoting photometric overlap, and BVSLAM directly uses the multi-exposure sequence as constraints in a factor graph state estimator without relying on High Dynamic Range (HDR) merging. We evaluate both methods against state-of-the-art approaches in nominal environments and during a repeated tunnel-exit transition at an emulated vehicle speed of 32 m s-1. In the tunnel, combining our B-Adapt with BVSLAM reduces the state estimation error by 78 % compared with AE images. These results suggest that bracketing efficiently improves visual pose estimation robustness to rapid illumination disturbances while retaining low error under nominal conditions. Our code is available at https://github.com/norlab-ulaval/bracketing-shows-the-way.

Comment
9 pages, 6 figures, submitted to 2027 IEEE International Conference on Robotics and Automation (ICRA 2027)

Closest papers

Nearest neighbours by meaning across the whole index.

DAPEVO: Deep Adaptive Patch Frame-Event Visual Odometry

cs.CV ·2026-09-25 ·Luca Gandolfi, Simone Nascivera, Roberto Pellerito, Rong Zou, Chiara Plizzari +1 more
similarity 0.64
Abstract

Visual odometry is essential for autonomous navigation in GPS-denied environments, yet RGB-based methods remain vulnerable to motion blur, challenging illumination, and dropped frames. Event cameras complement conventional cameras with high temporal resolution and dynamic range, but their asynchronous measurements complicate reliable correspondence estimation. We present DAPEVO, a learned visual odometry system that estimates image and event correspondences independently at shared patch locations and fuses their correlation evidence before motion refinement. Each tracked patch maintains image and event descriptors, and a learned scalar gate combines modality-specific correlation embeddings for each patch--frame edge before a shared recurrent refinement and bundle-adjustment update. DAPEVO also supports event-only observations, enabling continued tracking when RGB frames are sparse or unavailable, while modality-aware keyframe culling preserves scarce frame constraints. On UZH-FPV, when retaining only one in six RGB frames, DAPEVO's mean absolute trajectory error (ATE) increases by only 36%, from 1.00 to 1.36m, whereas the ATE of DPVO and RAMP-VO rises by factors of $3.7\times$ and $3.1\times$, respectively. On TartanEvent, DAPEVO similarly remains below 1m ATE at 3Hz RGB input, while DPVO and RAMP-VO exceed 9m. Under degraded RGB input on TartanEvent, DAPEVO achieves an ATE of 0.60m, compared with more than 4m for both DPVO and RAMP-VO, while also outperforming event-only DEVO at 0.87m.

0.16

RawSLAM: Online HDR Gaussian SLAM from Linear Radiance

cs.CV ·2026-09-17 ·Marina Orozco González, Luis Merino
datasetcode/data similarity 0.63
Abstract

Current dense visual SLAM systems rely almost exclusively on 8-bit tonemapped Low Dynamic Range (LDR) inputs, limiting their robustness in extreme lighting where shadows and highlights trigger tracking drift and mapping collapse. Conversely, existing raw and High Dynamic Range (HDR) reconstruction pipelines operate strictly offline. They depend on Structure-from-Motion preprocessing and are not suited for large inter-frame motion. We present, to the best of our knowledge, the first online Gaussian SLAM framework that tracks and maps directly on single-exposure 16-bit linear HDR imagery. Our method rests on three core components: an architecture-agnostic HDR Gaussian Splatting module featuring an MLP-free logarithmic parameterization of Gaussian color features; a Reinhard range-compressed photometric objective; and structure-guided spatial gradient weighting. Combined, these components allow our approach to outperform a direct HDR adaptation of MonoGS in both trajectory and reconstruction accuracy, while rendering natively in linear scene radiance for post-rendering processing. The same formulation runs unchanged on standard 8-bit inputs, roughly halving the MonoGS baseline error. Furthermore, our HDR Gaussian module transfers seamlessly to SplaTAM, Gaussian SLAM, and DROID-W, eliminating all tracking failures these systems suffer on challenging illumination sequences. To enable this research, we introduce RawSLAM: a dataset of 10 real-world indoor sequences featuring 16-bit RAW imagery, aligned depth, IMU measurements, and external OptiTrack poses. Code and dataset will be made publicly available soon.

0.39

DAVIO: Dense Monocular-Inertial SLAM with Feed-Forward Initialization and Pose-Conditioned Mapping

cs.RO cs.CV ·2026-09-23 ·Jaafar Mahmoud, Arthur Movsesyan, Mikhail Iumanov, Sergey Kolyubin
similarity 0.62
Abstract

A camera and an IMU are the minimal sensor setup for metric localization and dense mapping, yet classical visual--inertial filters must wait for parallax before they start and then retain only sparse landmarks. Feed-forward geometry models, in contrast, predict dense structure from a few images but provide neither metric scale nor gravity. We present DAVIO, which uses a single multi-view depth model, Depth Anything~3, for both start-up and mapping. At start-up, a five-image window and preintegrated IMU measurements form a feature-free linear system. Its robust, conditioning-checked solution bootstraps a VIO filter through buffered replay. During tracking, the filter's metric poses condition the depth model. Residual scale is corrected only along viewing rays, which preserves the metric camera baselines, and a gravity-preserving submap graph with drift-gated revisits refines the map. On EuRoC, DAVIO starts markedly earlier, reduces the localization error, and maps more accurately than SOTA feed-forward mappers given identical poses. On building-scale ORI sequences, DAVIO is on bar or better than SOTA mappers on the same odometry, and degrades far less when GT poses are replaced by real odometry. We release the code of DAVIO, a real-time dense metric SLAM system, to the community.

0.17

Noctif3R: Feed-Forward Monocular Real-Time SLAM for Photon-Limited Scenes on Embedded Hardware

cs.RO ·2026-09-17 ·Mihir Chauhan, Aditya Uday Abhang, Kevin Biju Mathew, Aniket Bera
similarity 0.62
Abstract

Robots carrying out tasks in dark environments need to localize from a single RGB camera, in light so low that the per-pixel signal approaches the sensor's own noise, on a power-constrained onboard computer, in real time. Each of these constraints has matured pipelines, but the intersection does not. Offline low-light reconstruction now recovers structure below -4 dB but is far too slow to run in real time, while the real-time monocular systems a robot can actually carry (DROID-SLAM, DPV-SLAM, etc.) degrade or fail when SNR gets low. We measured how they fail: across the nine lowest darkness levels of our scenes, DROID-SLAM returns a full-length trajectory carrying no information about the camera's motion on all nine, VGGT-SLAM and CUT3R on eight, pi^3 on seven, and DPV-SLAM on four. We present SYS, a monocular pipeline built on a low-light feed-forward pointmap front end with an explicit match gate, which returns three tracked trajectories and no uninformative ones, at the lowest error of any method where it tracks (24-47% of the no-information ceiling against 56-73% for the strongest baseline), and at the narrowest coverage. On a real robot video take in which 86.5% of delivered frames are entirely black, every configuration of ours stops after the lit beginning, while DROID-SLAM and DPV-SLAM each emit a pose for all 1178 frames. Our method contribution is an embedded execution path for the Jetson AGX Orin: running the map, keyframes and backend at 384 pixels with tracking at 256, together with two fixes to the per-frame pose solve, is a replicated Pareto improvement, 1.28x throughput at 0.964x error on one scene and 1.42x at 0.68x on a second, with 47% less peak GPU memory and 29% less energy per pose. We evaluate on a calibrated, bit-exact regenerable noise ladder, on relabelled real-world dark exposures, and on a new dark-room video ladder recorded from a Boston Dynamics Spot robot.

0.47

Depth-guided Multi-view Exposure Bracketing for HDR Robot Vision

cs.CV ·2026-08-17 ·Jinnyeong Kim, Juhyung Choi, Woohyeok Kim, Sunghyun Cho, Seung-Hwan Baek
top venuebenchmarkdataset similarity 0.61
Abstract · 14 pages, ECCV 2026 accepted

Achieving reliable single-shot high dynamic range (HDR) imaging under extreme illumination conditions remains a long-standing challenge, yet no comprehensive benchmark exist for evaluating HDR perception in multi-sensor robotic systems. To fill this gap, we introduce a large-scale dataset collected via a custom robotic vision platform and an iPhone 13 Pro: 121 real-world scenes spanning modest and ultra-high dynamic range conditions, alongside 20 synthetic video sequences from the CARLA simulator. As a reference pipeline for this dataset, we propose Depth-guided Multi-view Exposure Bracketing (DMEB), a single-shot HDR method that distributes drastically different exposures across multi-view low-bit-depth cameras and fuses them via depth-guided confidence-aware fusion. Evaluations on our dataset show that DMEB establishes a strong reference point and highlight the promise of this sensor configuration for robust HDR perception in diverse multi-camera and depth sensor system.

0.55

MVP-SLAM: Multi-Camera Visual-Inertial Floorplan-Prior SLAM

cs.RO ·2026-09-30 ·Asier Bikandi-Noya, Miguel Fernandez-Cortizas, Muhammad Shaheer, Holger Voos, Jose Luis Sanchez-Lopez
similarity 0.61
Abstract · 9 pages, 4 figures. Submitted to IEEE Robotics and Automation Letters (RA-L)

Indoor building construction sites are demanding environments for visual SLAM, where variable lighting and repetitive, low-textured structures make the system drift over long trajectories, though structural elements such as walls remain distinguishable despite these conditions. These buildings are constructed according to their as-planned floor plans, available from the design phase, and although the actual as-built site can differ from this design, floor plans still provide a metric reference, both to localize the system in the building and to correct drift. Existing methods often use the floor plan to correct an already-built trajectory offline, and those that instead correct it online typically rely on depth sensors. We instead present MVP-SLAM, an online visual-inertial SLAM on two opposite-facing fisheye cameras that corrects drift from cameras alone by matching walls detected in its map to the floor plan, through a drift-aware policy. A multi-stage integration then turns each matched pair incrementally into a persistent correction, so the trajectory stays corrected and localized within the floor plan as it is built. MVP-SLAM was validated on the multi-floor construction sites of the Hilti-Trimble SLAM Challenge 2026, ranking 2nd of 22 teams in the Localization task (0.29 m mean RMSE) and 5th of 62 teams in the SLAM task (0.24 m), the top-ranked one in both tasks among those that operate online, integrate the floor plan, and localize within it.

0.16

Benchmarking Visual-Inertial Odometry in Subterranean Environments Under Sensor Degradation, Miscalibration, and Dynamic Occlusion

cs.RO ·2026-09-16 ·Yueying Zhu, Xiang Li, Thien-Minh Nguyen, Xuehe Wang, Shenghai Yuan
benchmark similarity 0.60
Abstract · 8 pages, 5 figures

Visual-inertial odometry (VIO) is a core capability for autonomous operation in GPS-denied subterranean environments, yet its reliability can degrade sharply under sensor drift, calibration errors, and dynamic occlusion. Existing evaluations mainly emphasize nominal-condition accuracy, offering limited insight into when practical deployment failures occur. In this work, we present a failure-centric stress-test benchmark for VIO in underground environments using the CERBERUS dataset. We systematically evaluate four representative VIO systems spanning filtering-, optimization-, and learning-based paradigms under nine practical perturbation settings, including IMU bias and noise variation, camera intrinsic and extrinsic drift, and dynamic scene occlusion. Beyond conventional trajectory error, we analyze robustness limits through coverage ratio and failure thresholds, revealing breakdown behaviors that are not captured by nominal-condition performance alone. Our study shows distinct vulnerability patterns across VIO paradigms: some methods are more sensitive to inertial degradation, while others are more affected by geometric miscalibration or dynamic interference. These results provide deployment-oriented guidance for VIO selection, calibration prioritization, and reliable operation in challenging underground scenarios. To support reproducible evaluation and future extensions, we will release the full benchmark scripts and evaluation pipeline.

0.15

Not Losing Your Way: Mitigating Visual-Inertial Odometry Drift through On-Demand Visual Feature Creation

cs.RO ·2026-11-05 ·Simone D'Angelo, Gianmarco Corrado, Federico Esposito, Vincenzo Scognamiglio, Fabio Ruggiero
similarity 0.60
Abstract · 8 pages, 4 figures. Submitted to the 2027 IEEE International Conference on Robotics and Automation (ICRA 2027)

Visual-inertial odometry (VIO) can degrade during aerial inspection in repetitive or poorly textured environments. We propose an active environment-modification framework for unmanned aerial vehicles (UAVs) relying on cameras and an inertial measurement unit only, without prior maps or additional localization sensors. Inspired by the fairy tale of Tom Thumb, the UAV creates visual features on demand by releasing ground markers or marking walls through physical contact. An information-based indicator triggers interventions using temporal confirmation and hysteresis. Evaluation includes three simulated environments and a 900-run factorial campaign. Lower cruise speed and active marking are associated with reduced divergence, while accuracy among non-divergent runs depends on speed-strategy interactions. Corridor experiments, with five runs per configuration, use OptiTrack for flight control while VIO-based marking decisions remain active online. The combined framework reduces the reported position root mean square error by approximately 35% relative to baseline VIO, supporting active feature creation for drift mitigation.

0.31