CS Paper Radar

Trajectory Generation and Control for Quadrotors

Sandesh Thapa

eess.SY cs.RO ·submitted 2026-10-25 17:22 UTC · v1

Abstract

In this project, I explored controller design and trajectory generation for a quadrotor. Differential flatness was used for trajectory generation based on one of the references. A minimum snap trajectory is generated from the given algorithm based on waypoint navigation, and a simple proportional plus derivative (PD) controller is used to track the trajectories. Simulation results are presented which generate smooth trajectories for position and velocity of the quadrotor.

Comment
8 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Cubic Spline Interpolation for Smooth Trajectory Generation in Autonomous Motion Systems

cs.RO ·2026-10-09 ·Aarush Mandayam, Sriram Aditya Gundla, Elliott Tammaro
similarity 0.61
Abstract

We presented a program that automates the construction and solution of the cubic spline interpolation problem for a sequence of position-time waypoints, producing trajectories that are continuous in position, velocity, and acceleration and therefore avoid the infinite-acceleration problem inherent to piecewise-linear waypoint following. By assembling the interpolation and continuity conditions into a single linear system and solving directly for the spline coefficients, the program removes the need to manually derive per-segment equations for each new waypoint set. We illustrated the approach on free-form curve drawing and signature digitization, two tasks that use the same underlying machinery required for smooth robot and drone trajectory generation. Future work includes extending the implementation to multi-axis trajectories with explicit velocity and acceleration bounds, adopting the more computationally efficient tridiagonal solution method for larger waypoint sets, and evaluating the approach quantitatively against alternative trajectory generation methods.

0.24

Equivalent-Agent Guidance for Cooperative UAV Payload Transportation

eess.SY ·2026-09-16 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.58
Abstract

This paper develops a guidance framework for cooperative transportation of a rigid payload by two uncrewed aerial vehicles (UAVs) to stationary and maneuvering landing platforms. A virtual equivalent-agent representation is first introduced to describe the translational motion of the rigidly coupled UAV-payload system, allowing the transportation problem to be formulated in terms of relative range and line-of-sight dynamics with respect to the landing platform. A geometric analysis establishes the terminal feasibility conditions for payload delivery. In particular, an arbitrary prescribed approach angle can be achieved for a stationary platform, whereas successful delivery to a maneuvering platform with zero relative velocity requires terminal velocity and heading angle synchronization and consequently a zero landing angle. Leveraging this framework, a robust fixed-time sliding mode guidance strategy is developed to regulate both relative range and line-of-sight dynamics. A separate link-orientation controller and control allocation scheme is presented to map virtual equivalent agent commands to the individual UAV's control inputs. The proposed strategy guarantees convergence to the desired landing configuration within a uniformly bounded time, independent of initial engagement geometries, while explicitly accommodating uncertainties arising from target maneuvers. Numerical simulations demonstrate accurate delivery under different terminal approach angles and platform maneuvers, while processor-in-the-loop implementation on a Raspberry Pi demonstrates that the guidance algorithm satisfies the real-time computational requirements. Nonetheless, a comparative analysis shows that the proposed framework achieves better tracking accuracy and faster sliding surface convergence while requiring significantly less control energy from each UAV.

0.22

Flatness-Based Geometric Path Following via Guiding Vector Fields

eess.SY ·2026-10-06 ·J. P. van Gool, H. G. de Marina, B. Jayawardhana, S. Ahmed
similarity 0.58
Abstract

Path following requires an agent to converge to and traverse a geometric path without a prescribed timing law. Guiding vector fields (GVFs) address this directly, but as guidance laws they offer no mechanism to compensate for the agent's own dynamics. Differential flatness-based control (DFBC), on the other hand, compensates for the agent's nonlinear dynamics but relies on a time-parameterized reference trajectory. This letter presents a unified algorithm, which we term flatness-based geometric control (FGC), that generates the DFBC reference hierarchy directly from a GVF and its higher-order time derivatives, eliminating the need for a pre-planned time-parameterized trajectory while retaining full dynamics-informed control. A cascade Lyapunov argument establishes exponential convergence of the tracking error and the physical trajectory to the desired path. The framework is further extended to singularity-free GVFs, which removes the topological obstruction and guarantees the condition for global exponential convergence on closed or self-intersecting paths. The proposed algorithm is validated in simulation.

0.26

Global Path Planner with Multi-Model Switching

cs.RO cs.SEeess.SY ·2026-09-11 ·Pietro Gori, Francesco Iotti, Eduard Zelenay, Rastislav Marko, Michele Pierallini +3 more
hot direction similarity 0.58
Abstract

This work enhances global path planning via a pure-pursuit controller with multi-model kinematic switching that sustains plan fidelity across diverse terrains. The system includes a traversability graph for terrain analysis, a Heading-Aware A* algorithm for generating feasible paths, and a multi-model Pure Pursuit controller for dynamic tracking. A core innovation is adaptive kinematic modeling, enabling real-time switching between kinematic models based on terrain features and robot states. This adaptability optimizes path efficiency and energy use in challenging scenarios. We validate the approach in simulation on different platforms, namely the Artaban quadruped and the X3 quadrotor drone, showcasing improved performance, robustness, and adaptability over standard baselines.

0.26

Aerodynamic Prior-Free Coordinated Trajectory Generation and Tracking Control for a Tail-Sitter UAV

cs.RO ·2026-09-10 ·Erchao Rong, Zihao Liu, Junning Liang, Jianguo Wang, Xiao Jie +3 more
top venuecode/data similarity 0.58
Abstract

This paper presents a coordinated trajectory generation and tracking control framework for a tail-sitter unmanned aerial vehicle (UAV), which does not require aerodynamic priors identified for a specific airframe while addressing the challenge of flight control under highly nonlinear aerodynamics across the full flight envelope. The core innovation lies in employing phase-specific aerodynamic modeling strategies for planning and tracking, tailored to their distinct functional characteristics, without requiring airframe-specific aerodynamic priors. Specifically, the phi-theory model under coordinated flight is employed to derive an analytic differential flatness mapping, and a simplified but locally accurate model is established for predictive control to enable real-time aerodynamic parameter estimation. The proposed framework is evaluated extensively through both simulation and challenging real-world flight tests under mild wind conditions, showing high-precision tracking and adaptability across the tested aerodynamic conditions. To the best of our knowledge, this is the first real-world demonstration of accurate trajectory tracking over tested flight regimes spanning the full envelope of a tail-sitter UAV without relying on aerodynamic identification campaigns. The source code of our framework is available at: https://github.com/SYSU-HILAB/AP-PnC.

0.34

Quadrotor Guidance for Tasks along Elliptical Boundary

eess.SY ·2026-10-23 ·Ravi Khandelwal, Ashwini Ratnoo
similarity 0.58
Abstract

This paper presents a guidance method that enables a quadrotor uncrewed aerial vehicle to perform inspection tasks along an elliptical boundary enclosing a structure of interest. The proposed guidance approach leverages a bifurcation theory-based framework that supports multiple inspection tasks, including convergence to a desired viewpoint, switching between viewpoints along the boundary, constant-speed elliptical circumnavigation, and circumnavigation with sectorial dwell-time constraint. Stability analysis of the proposed guidance dynamics establishes convergence of the generated reference trajectories to the desired behavior. The control parameters in the proposed method further allow the settling time of the reference trajectory to be specified for each task. The resulting reference velocity expressions are closed-form and algebraically simple, facilitating practical implementation. A qualitative comparison with existing guidance methods highlights the flexibility of the proposed approach in achieving different inspection tasks through a unified framework, while relying on simpler guidance computations. The proposed guidance method is validated through numerical simulations using a six-degree-of-freedom quadrotor model with model uncertainties, and a cascaded sliding-mode controller that tracks the generated reference trajectories under bounded disturbances.

0.24

A Two-Wheeled Quadrotor with All-Clockwise Tilted Rotors for Level-Attitude Surface Locomotnion

cs.RO eess.SY ·2026-10-29 ·Takumi Ito, Satoshi Nakano
similarity 0.57
Abstract

Conventional wheel-equipped quadrotor UAVs must tilt their bodies to generate lateral forces, limiting their ability to maintain a desired attitude during lateral motion. This paper proposes a wheeled quadrotor with all-clockwise tilted rotors that uses surface contact as a constraint to generate propulsion along the contact surface without tilting the vehicle. We analyze feasible forces and system controllability under surface contact and optimize the vehicle design considering different rotor-spin configurations. The optimization results show that a configuration in which all four rotors spin clockwise can generate a larger tangential force than the conventional alternating-spin configuration. This approach enables both aerial and contact-based locomotion without additional rotor-tilting actuators or mechanisms. Simulation results demonstrate both hovering in free space and horizontal locomotion on a floor while maintaining a level attitude.

0.21

$\mathcal{C}^\infty$ Smooth Trajectory Planning with Application to Soft Robots

cs.RO ·2026-11-03 ·Reinhard M. Grassmann, Abdulaziz Y. Alkayas, Lingyun Chen, Sami Haddadin
similarity 0.57
Abstract · 8 pages, 6 figures

High motion performance and avoiding structural vibrations rely on smooth trajectory planning. The smoothness requirement depends on the robot's complexity in terms of the number of degrees of freedom and system order due to the flexibility of the joints and links. For industrial robots, the smoothness requirements have been determined and subsequently taken into account. Although unknown for soft continuum robots, the exact smoothness requirement can potentially be much larger than previously considered ones such as $\mathbf{\mathcal{C}^4}$ for collaborative robots and $\mathbf{\mathcal{C}^5}$ for quadcopter drones. To address this gap, we introduce a $\mathbf{\mathcal{C}^\infty}$-smooth trajectory generator that respects defined kinematic limits and generates infinitely differentiable trajectories. The generated path addresses and generalizes to all smoothness requirements, where a transition between sequential states is needed. Therefore, all trajectories have continuous velocity, acceleration, jerk, snap, crackle, pop, etc. Of particular interest is the case of null boundary conditions, i.e., all derivatives at the start and end of the trajectory are equal to zero. We verified and evaluated our proposed approach in simulations and on hardware.

0.31