CS Paper Radar

$\mathcal{C}^\infty$ Smooth Trajectory Planning with Application to Soft Robots

Reinhard M. Grassmann, Abdulaziz Y. Alkayas, Lingyun Chen, Sami Haddadin

cs.RO ·submitted 2026-11-03 20:59 UTC · v1

Abstract

High motion performance and avoiding structural vibrations rely on smooth trajectory planning. The smoothness requirement depends on the robot's complexity in terms of the number of degrees of freedom and system order due to the flexibility of the joints and links. For industrial robots, the smoothness requirements have been determined and subsequently taken into account. Although unknown for soft continuum robots, the exact smoothness requirement can potentially be much larger than previously considered ones such as $\mathbf{\mathcal{C}^4}$ for collaborative robots and $\mathbf{\mathcal{C}^5}$ for quadcopter drones. To address this gap, we introduce a $\mathbf{\mathcal{C}^\infty}$-smooth trajectory generator that respects defined kinematic limits and generates infinitely differentiable trajectories. The generated path addresses and generalizes to all smoothness requirements, where a transition between sequential states is needed. Therefore, all trajectories have continuous velocity, acceleration, jerk, snap, crackle, pop, etc. Of particular interest is the case of null boundary conditions, i.e., all derivatives at the start and end of the trajectory are equal to zero. We verified and evaluated our proposed approach in simulations and on hardware.

Comment
8 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

LEAP: Gradient Flow Augmented Lagrangian Trajectory Optimization for Contact Constrained Robots

cs.RO ·2026-10-14 ·César E. Ramos Chuquiure, Ryan Tsai, Yutong Zhou, Zihang Huang, Vansh Thakur +6 more
similarity 0.58
Abstract

Generating dynamically feasible motions for legged and manipulating robots requires solving a large, nonlinear, non-convex optimal control problem (OCP) in which contact wrenches must satisfy friction-cone constraints throughout the motion, not only at isolated instants. Existing solvers are sensitive to the initial guess and scale poorly with the number of joints. This paper introduces LEAP, which transcribes the OCP with pseudospectral collocation and, instead of a Newton or SQP solve, integrates a primal--dual gradient flow of a Powell--Hestenes--Rockafellar augmented Lagrangian to compute a solution. Because the flow is stiff, this paper designs a linearly implicit integrator with a Gauss--Newton metric, momentum, and a merit-based step controller that keeps the augmented Lagrangian monotone. Across locomotion benchmarks on five robot platforms, from planar hoppers to 32-joint humanoids, LEAP is the only method to solve every tested problem, achieves substantial speedups over Crocoddyl and Aligator on several benchmarks, and reaches trackable references at smaller compute budgets. The resulting trajectories are validated by tracking them in a high-fidelity simulator and on hardware. We will make the code public upon final acceptance of this paper.

0.24

Data-Driven Precision Control of Soft Helicoid Robots

cs.RO cs.LGmath.DS ·2026-11-09 ·Roshan S. Kaundinya, Mark Leone, Roberto Sabella, Hugo Buurmeijer, Luis Pabon +3 more
similarity 0.57
Abstract · Submitted to npj Robotics. 44 pages, supplementary information included

A purely data-driven method grounded in the theory of adiabatic spectral submanifolds (aSSMs) was recently used to model and control nonlinear soft robotic simulators. Here, we extend the methodology to learn aSSM-reduced models from data collected from hardware soft robotic platforms. Specifically, we learn a five dimensional (5D) aSSM-reduced nonlinear ordinary differential equation (ODE) that accurately models the dynamics of a soft-helicoid trunk robot. We then use this ODE in a model predictive control scheme to demonstrate real-time precision control across various challenging closed-loop trajectory-tracking tasks, ranging from 2D to 3D trajectories with static and dynamic constraints. We find that our methodology enhances accuracy and precision across all control tasks compared to available data-driven linear methods and model-free reinforcement learning. While we focus here on a soft-helicoid trunk robot, our methodology relies solely on hardware data and is therefore applicable to a broader class of soft robotic systems.

0.26

Some Modifications to Our End-to-End UAV Planner

cs.RO ·2026-08-16 ·Junjie Lu, Bailing Tian
similarity 0.57
Abstract

The one-stage planner YOPO maps a single depth image and the robot state directly to a set of candidate trajectories, trained by backpropagating through differentiable trajectory costs. This yields dense, geometrically informative supervision, but inherits the pathologies of soft-constrained optimization: the safety cost competes with the smoothness and goal-reaching terms, is non-convex across homotopy classes, and the single-piece polynomial is limited in expressiveness. In this report, we summarize several effective modifications. We adopt a two-piece MINCO parameterization, trading time for smoothness without altering the trajectory's spatial profile. We further lift YOPO's multi-modal prediction to span distinct homotopy classes, treating each motion primitive as a homotopy anchor that confines the trajectory to a feasible basin - without explicit safe-flight-corridor construction or front-end search. For dynamic feasibility, we impose barrier penalties on velocity and acceleration together with a curvature-dependent speed limit whose gradient acts only on the velocity, producing an adaptive-speed behavior that decelerates in cluttered regions or sharp turns. We replace score regression with a ranking loss, preventing small score errors from reordering the candidate set. These yield richer trajectory representations, safer obstacle avoidance, and more direct flight paths.

0.04

An Open MuJoCo Simulation Framework for a Quadrotor Carrying a Tendon-Driven Soft Continuum Arm

cs.RO eess.SY ·2026-10-11 ·Haitham El-Hussieny
code/data similarity 0.57
Abstract

Combining aerial robots with soft continuum manipulators promises safe, compliant interaction with the environment, but the coupled dynamics of a free-flying base and a highly deformable, underactuated arm are difficult to study without a suitable simulator. This paper describes an open-source simulation framework, built on the MuJoCo physics engine, for a quadrotor that carries a tendon-driven soft continuum arm underneath its body. The arm is modelled as a pseudo-rigid-body chain of twelve segments joined by pairs of orthogonal compliant hinges. Three tendons, spaced \SI{120}{\degree} apart and routed through every segment, bend it in any direction. A geometric tracking controller on $SE(3)$ flies the vehicle; its rotor allocation matrix is generated directly from the model description. A closed-form tendon-tension allocation keeps every tension within its limits and gives the same bending moment in every direction. We report the full set of modelling choices and parameters, and we evaluate the framework in four simulated scenarios: a \SI{36}{\second} mission with a figure-eight and a tendon-driven tip sweep, an attitude-gain study, a quasi-static characterization of the bending workspace, and an impulsive disturbance applied to the arm tip. With the nominal gains the vehicle tracks the mission with \SI{3.1}{\centi\meter} RMS position error while the arm tip swings up to \SI{37}{\centi\meter} from the body axis. The gain study shows that a low-bandwidth attitude loop lets the arm excite sustained oscillations. The simulation runs about $15\times$ faster than real time on a laptop CPU. All models, controllers and scripts that reproduce the figures are released.

0.25

Continuous-Time Safe Planning and Control for Agile Quadrupeds

cs.RO ·2026-10-26 ·Gage MacLin, Mason Peterson, Camilla Tabasso, Venanzio Cichella, Joshua Migdal +2 more
similarity 0.57
Abstract

Agile quadruped navigation in dynamic environments demands trajectories that are both dynamically feasible and provably collision-free. Most real-time planners achieve tractability through a convex reduction that requires simplified kinematic models, discarding motion that the robot can readily execute, and certify safety only at discretization points, leaving open possible inter-sample collisions with moving obstacles. We present a real-time motion planning framework that retains the fully-actuated $SE(2)$ model of a quadruped, with its anisotropic, heading-coupled velocity bounds, and accepts the resulting nonconvexity. By parameterizing trajectories as composite Bernstein polynomials, we exploit the convex hull property to certify collision avoidance and the input bounds over the entirety of each planning horizon. Solved at online replanning rates, the optimization runs in closed loop, commanding body velocities to the locomotion controller. We validate the approach in simulation against ablations and external baselines, and in hardware experiments on a quadruped navigating among unknown moving obstacles, recovering both lateral and heading-coupled motion that simplified models exclude.

0.25

Trajectory Generation and Control for Quadrotors

eess.SY cs.RO ·2026-10-25 ·Sandesh Thapa
similarity 0.57
Abstract · 8 pages, 6 figures

In this project, I explored controller design and trajectory generation for a quadrotor. Differential flatness was used for trajectory generation based on one of the references. A minimum snap trajectory is generated from the given algorithm based on waypoint navigation, and a simple proportional plus derivative (PD) controller is used to track the trajectories. Simulation results are presented which generate smooth trajectories for position and velocity of the quadrotor.

0.31

Collocated Shape Regulation for Soft Robots

cs.RO eess.SY ·2026-09-23 ·Pietro Pustina, Ebrahim Shahabi, Daniel Feliu-Talegon, Alessandro De Luca, Cosimo Della Santina
hot direction similarity 0.57
Abstract · 33 pages, 22 figures

Controlling the shape of a continuum soft robot typically requires an accurate dynamic model and actuation of all degrees of freedom. We show that regulating only the actuated coordinates, through collocated shape control, achieves provably stable convergence of those coordinates and, under an explicit compatibility condition, of the entire robot shape. While collocated control is a cornerstone of high-performance motion control in rigid robotics, extending this formulation to continuum soft robots has remained challenging due to the complexity of their dynamics. We present the first general framework for collocated control of continuum soft robots and derive a unified family of controllers, including PD, PID, PsatID, and their counterparts with compensation and cancellation components. The framework unifies existing approaches while introducing new controller designs. In particular, we develop three classes of PD and PID like regulators with local, semi-global, and global stability guarantees, and provide rigorous convergence analyses for each. Extensive experimental validation demonstrates the effectiveness of the proposed methods across different model discretizations and controller parameters. The resulting framework provides practical design guidelines for selecting and implementing controllers with known stability guarantees, without requiring a complete dynamic model of the robot

0.33

Global Path Planner with Multi-Model Switching

cs.RO cs.SEeess.SY ·2026-09-11 ·Pietro Gori, Francesco Iotti, Eduard Zelenay, Rastislav Marko, Michele Pierallini +3 more
hot direction similarity 0.57
Abstract

This work enhances global path planning via a pure-pursuit controller with multi-model kinematic switching that sustains plan fidelity across diverse terrains. The system includes a traversability graph for terrain analysis, a Heading-Aware A* algorithm for generating feasible paths, and a multi-model Pure Pursuit controller for dynamic tracking. A core innovation is adaptive kinematic modeling, enabling real-time switching between kinematic models based on terrain features and robot states. This adaptability optimizes path efficiency and energy use in challenging scenarios. We validate the approach in simulation on different platforms, namely the Artaban quadruped and the X3 quadrotor drone, showcasing improved performance, robustness, and adaptability over standard baselines.

0.26