CS Paper Radar

A physics-informed uncertainty-aware surrogate for $p$-$n$ junction diodes

Suchita Kulkarni

cs.LG cond-mat.mes-hall ·submitted 2026-10-29 13:13 UTC · v1
benchmarkunusual

Abstract

We develop an uncertainty-aware physics-informed surrogate for a one-dimensional $p$-$n$ junction diode, conditioned on device length, doping and bias. Using the internal state of the device as predicted by the surrogate we develop a test-suite of quantities of interest including the terminal current, depletion width, peak field and stored charge. The formalism and the quantities are can be extended to asymmetric junction and two-dimensional diodes as shown by means of benchmark analysis. For the one-dimensional symmetric junction surrogate, we obtain 0.11% median $L_1$ error on the electrostatic potential, and 1.5% and 0.61% on the electron and hole densities. Finally, we develop an uncertainty analysis which determines the validity of surrogate answer within the user-specified tolerance.

Comment
Comments welcome

Closest papers

Nearest neighbours by meaning across the whole index.

Mesh-Native Physics-Informed Graph Surrogates for TCAD-in-the-Loop Design Space Exploration

cs.LG cs.ARcs.CE ·2026-09-02 ·Leonid Popryho, Ayoub Sadeghi, Inna Partin-Vaisband
published similarity 0.53
Abstract · 9 pages, 4 figures, 2 tables. Accepted at IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

High-fidelity TCAD simulation of drift-diffusion transport remains the workhorse of emerging FinFET device design, but it is computationally expensive, especially for 3D structures where runtime escalates steeply with mesh complexity. This sharply limits multi-objective design space exploration. Existing machine-learning surrogates map a fixed set of design parameters to a few scalar device metrics, discarding the underlying physics and losing transferability across device geometries and families. A physics-informed graph attention network (GAT) surrogate is proposed. It operates directly on the tetrahedral TCAD mesh and predicts, at every mesh node, the electrostatic potential together with the electron and hole quasi-Fermi levels, the fundamental unknowns of the drift-diffusion system. Training combines a data loss with finite-volume current-continuity residuals, embedding carrier-transport physics into the objective. Operating on the mesh as a graph, the surrogate inherits size generalization: a model trained on few-fin meshes applies unchanged to substantially larger arrays, bounded at inference only by GPU memory. Per-node uncertainty from a deep ensemble drives an active-learning loop that screens large candidate pools in seconds and forwards only the most informative designs for full simulation. Benchmarked against Sentaurus Device on multi-fin tri-gate FinFETs, the surrogate reproduces the three drift-diffusion fields with sub-volt per-field RMSE and reaches a per-design throughput orders of magnitude higher than the full simulator. The advantage grows with device size: on large multi-fin arrays that are prohibitively slow to simulate directly, inference still completes in under a second per device, enabling Pareto-front exploration across device scales infeasible for direct TCAD sweeps.

0.62

Physics-Informed Neural Network Surrogate for Oxygen Vacancy Dynamics in epitaxial $\mathrm{SrTiO_3}$ on Si memristors via Dynamic Spectral Optimization

cs.LG cond-mat.mtrl-sci ·2026-09-02 ·Rodion Podorozhny, Nikoleta Theodoropoulou, Jelena Tešić
similarity 0.50
Abstract

Physics-informed neural networks (PINNs) offer a promising framework for modeling semiconductor devices, yet standard architectures struggle with severe numerical stiffness and multiscale spatial discrepancies inherent to oxide heterostructures. Here, we demonstrate a cascaded PINN architecture coupled with a custom second-order Chebyshev second kind polynomial spectral optimizer (DSO V2 Hybrid) to model ion-electronic drift-diffusion transport in Pt/SrTiO$_3$/Si memristive heterostructures across a 20 nm STO film on a 380 $μ$m Si substrate. By isolating potential, carrier density, and vacancy transport into four sequentially trained sub-neural-networks, our model circumvents condition numbers exceeding $10^{16}$ without operator splitting. The trained surrogate reproduces experimental conductive-AFM current-voltage hysteresis ($R^2 > 0.96$) while ensuring strict Poisson consistency across continuous space. Compared to conventional finite-element solvers (e.g., COMSOL), the PINN surrogate enables differentiable inverse parameter estimation and linear time inference.

0.26

PINND: Physics Informed Neural Networks for Solving the Drift-Diffusion Equations

cs.LG ·2026-10-23 ·Luke Ragan, Matteo G. C. Alasio, Enrico Bellotti, Luca Dal Negro
similarity 0.49
Abstract

The drift-diffusion equations are the fundamental building block for the modeling, design, and optimization of modern semiconductor devices. Solutions of the drift-diffusion equations rarely give way to analytical forms, and exhibit strong nonlinearity, with the solutions ranging over several orders of magnitude. These attributes have led to research into numerical solvers, and while many commercial Technology Computer Aided Design (TCAD) packages now exist, they may require long simulation times, exhibit sensitivity to initial guesses, and rely on mesh generation. Further, these solvers are not well suited for inverse problems where the design parameters of a device are retrieved from its desired functional characteristics. To address all these challenges, this work demonstrates the usage of Physics Informed Neural Networks for the Drift-diffusion (PINND) equations with errors comparable to traditional simulation software using advanced training techniques to solve problems beyond the well-behaved equilibrium regime. For this study, we specifically choose an abrupt PN-junction in both one and two dimensions that features extreme gradients of the carrier concentrations at the Ohmic contacts and an abrupt discontinuity in the doping profile. Using the proposed PINN architecture, we are able to retrieve accurate results for all observables under all bias conditions. Additionally, we apply the PINN solver towards the inverse problem of retrieving doping profiles directly from desired electric field distributions or electrostatic potentials under non-zero applied biases. Our work establishes a powerful PINNs-based approach for semiconductor device modeling with the ability to solve inverse problems under non-equilibrium conditions for microelectronics research and discovery.

0.27

Decision-Gated Surrogate-Assisted Stochastic Optimization with Independent High-Fidelity Certification for Photovoltaic Hosting-Capacity Planning

eess.SY ·2026-09-25 ·Ali Abubakar, Samuel Essamuah Assabil, Akhtar Hussain, Van-Hai Bui
similarity 0.48
Abstract · 17 pages

High photovoltaic (PV) penetration planning requires repeated nonlinear PV and power-flow evaluations under uncertain irradiance and demand, particularly when two competing objectives, penetration and total electrical loss, are optimized simultaneously subject to reliability constraints. This paper develops a decision-focused, surrogate-assisted stochastic multiobjective framework in which a calibrated PV model coupled with a distribution-network simulator provides the high-fidelity reference, while matched data-only and physics-informed surrogates accelerate optimization and are evaluated empirically for decision reliability across the loss-penetration tradeoff. Although the two surrogates exhibit nearly identical held-out errors, optimizer-realistic screening yields markedly different operational validity rates of 44.4% and 93.4%, respectively, motivating selection of the physics-informed model on decision performance rather than test accuracy. Surrogate inference cuts the cost of a 60-scenario design evaluation from 286.0 to 0.46 ms, an approximately 620 time speedup. A decision-gated enrichment strategy further targets Pareto-critical, constraint boundary, and surrogate-disagreement regions, reducing prediction error by 39.1%. Independent 500 scenario certification verifies all 80 screened candidates and identifies 46 non-dominated designs; the selected compromise attains 70.74% expected penetration with 297.9 kW expected total electrical loss. Cross-feeder transfer eliminates baseline voltage violations on the 85- and 69-bus systems, but produces overvoltage and a 62.7% increase in feeder-network loss on the 33-bus system, demonstrating that certified penetration is topology-specific and demands decision-level auditing, independent certification, and feeder-specific validation.

0.24

Prescreening Point Defects in Semiconductors With Machine Learning

cs.LG cond-mat.mtrl-sci ·2026-09-13 ·Paul Karlsson, Joel Davidsson, Rickard Armiento
similarity 0.47
Abstract · 14 pages, 4 figures

High-throughput calculations using density-functional theory (DFT) are commonly used to explore point defects for applications in power electronics and quantum technologies. There is currently a major shift away from these traditional simulation techniques towards machine learning (ML) methods. We explore a class of physics-guided ML models for predicting defect formation energies and zero-phonon lines (ZPL) to identify point defects for quantum applications. The models are specifically targeted for use in a prescreening step for accelerated high-throughput workflows, and are therefore designed to avoid the costly relaxation step typically present with ML interatomic potentials (MLIPs). We compare performance for single and double point defect systems in 4H-SiC with ridge, kernel ridge, and multilayer perceptron (MLP) models using three different descriptors representing the defect systems. For vacancies and substitutions, the optimized models give mean absolute errors (MAEs) of 0.437 eV for the formation energy and 0.202 eV for ZPLs, which is just above the level at which such predictions can be useful even beyond the targeted prescreening, i.e., in some applications they may completely replace the need for costly DFT calculations. For interstitials the MAEs are larger, 1.101 eV for the formation energy and 0.230 eV for the ZPL, which, while still useful for prescreening, will not generally be useful for more detailed characterization. Hence, while the results may be further improved by model design and optimization, the models presented in this work are already useful for prescreening in high-throughput characterization of point defects.

0.33

NN-Based Transistor Modeling for Ultra-Fast SPICE Simulation and Standard Cell Library Characterization

cs.ET cs.LG ·2026-10-22 ·Rodion Novkin, Hussam Amrouch
benchmark similarity 0.46
Abstract · 11 pages

Neural network (NN)-based transistor models have proven to be a promising solution to accelerate device modeling. Although these models demonstrated remarkable speedup in circuit simulations, they were not rigorously tested in complex tasks within standard EDA tool flows for chip design, which require very high transistor model precision to provide accurate results and converge properly. To investigate their full potential and promise, we develop NN-based transistor models that accurately predict the drain current and various charges for a 3nm nanosheet, and employ the models for a standard cell library characterization. This enables us to evaluate the accuracy and speedup under a very wide range of SPICE simulations, benchmarking our models against an industry-standard implementation. Since standard cell library characterization involves thousands of SPICE simulations, it serves as a great benchmark for transistor model quality and consistency. To further evaluate model accuracy, we also perform analog- and digital-level simulations for various complex circuits. Our experiments reveal that NN-based models are a valid alternative to existing transistor compact models, capable of producing accurate delay and power estimates with a much higher speed and convergence time compared to the conventional Verilog-A-based industry-standard (BSIM-CMG) transistor compact model. Our NNs achieve sub-0.11% and 0.76% errors for delay and total power evaluation on a wide range of circuits, while taking up to 8 times less time during the standard cell library characterization. Additionally, we provide comprehensive information and guidance on NN accuracy, unveiling the relationship between NN size and its effect on circuit simulation precision.

0.35

A Unified Physics-Aware Quantum Machine Learning Framework across Power GaN HEMTs and Logic Nanowire FETs: Predicting Unseen Process Splits and Held-Out Geometry Combinations with Lower Error and Tighter Split-to-Split Variability

cs.AI ·2026-09-04 ·Rushat Rai, Yun-Yuan Wang, Autsada Kakaen, Pei-Jie Chang, Doan Viet Nguyen +8 more
similarity 0.46
Abstract · 11 pages, 11 figures

We present a unified reinforcement-learning (RL) framework that discovers compact parametrized quantum circuits (PQCs) for data-scarce device modeling. A graph neural network (GNN) policy optimized by proximal policy optimization (PPO) searches circuit architectures using leave-one-group-out cross-validation (LOGOCV) error on held-out process or geometry groups as the reward. The framework achieves the lowest mean absolute error (MAE) on all 11 targets versus six classical baselines, with 59% lower error (Ioff) and 81% tighter fold variability (VTH) for HEMTs and 84% lower error (VTH, SS, Ioff) and 82% tighter fold variability (Ioff) for NWFETs. These results demonstrate the potential of RL-selected, classically simulated PQCs as compact surrogates with low OOD error and improved physical consistency, despite imposing no explicit physical constraints, penalty terms, or device-specific equations, on the two evaluated device datasets.

0.27

AI and TCAD for Inverse Design and Defect Discovery: From Simple Machine Learning to LLM

cs.LG ·2026-09-07 ·Hiu Yung Wong
similarity 0.45
Abstract

AI has revolutionized various engineering domains, but its impact on semiconductor device design and defect discovery is still limited, due to limited data and the curse of dimensionality. In this paper, we will discuss our work on using the Technology Computer-Aided-Design (TCAD) to generate precise data needed for machine learning (ML) to enable simulation-augmented ML. We demonstrate that with minimal domain expertise, it is possible to create a machine that performs as well as a device engineer on a specific task. We will show that auto-encoder-based machine learning models and noise engineering applied to TCAD data are effective at learning latent physics, and that the models can be seamlessly applied to experimental data. We will demonstrate how to build a device-engineer-level model step by step through various examples, including using only non-destructive electrical data to inverse-engineer the PiN diode layer thickness variations, the Ga2O3 Schottky diode doping and anode workfunction variations, and the transistor contact resistance in an inverter. Examples also include the generation of a FinFET IV/CV prediction model, the mapping between transistor images and IV curves, and the automatic calibration of TCAD parameters for a Ga2O3 Schottky diode, which can only be handled well by experienced TCAD engineers. Finally, to fully realize the potential of AI, large language models (LLMs) and multimodal LLMs (MLLMs) are believed to be necessary. We will discuss the application of LLMs to TCAD command file creation and our vision for MLLMs in automated device design and defect discovery.

0.50