CS Paper Radar

Metabolic heat and moisture reuse with climate-adaptive control for energy-efficient black soldier fly bioconversion in modular container farms

Sriram Saravanan, Philipp Sauerteig, Moritz Gold, Stefan Streif

eess.SY ·submitted 2026-11-01 18:56 UTC · v1
unusual

Abstract

Black soldier fly larvae (BSFL, Hermetia illucens) convert organic residues into feed ingredients and fertiliser. Climate control is a major contributor to the energy demand of container-based bioconversion. We developed a control-oriented dynamic model linking larval growth, substrate dynamics and container climate to heating, ventilation and air conditioning (HVAC). A two-level Model Predictive Control (MPC) strategy planned climate trajectories and tracked them through HVAC actuation. Four simulation studies examined controller selection, HVAC configuration, larval age pairing and inter-container coupling, using subsets of eight climate scenarios. Across the four scenarios tested for controller selection, dynamic MPC reduced specific energy consumption (SEC) by 31 to 61% and increased predicted dry biomass at harvest by up to 27.5% relative to single fixed setpoints. Under the tested controller settings, active cooling was required in the two hot scenarios, whereas dehumidification provided no additional operational benefit. Pairing larval ages four days apart within one container reduced SEC by up to 33% in the tested non-hot scenarios. In the Cooldry scenario, two age-separated containers connected by an actuated air duct produced 9.0% more biomass and achieved 3.9% lower SEC than two independent containers with mixed ages, despite using 4.6% more total HVAC energy. The simulations suggest that dynamic climate control and metabolic heat and moisture reuse can improve the energy intensity of BSFL bioconversion. The quantitative estimates and hardware recommendations require experimental validation before application to industrial facilities.

Comment
Submitted to Journal of Insects as Food and Feed. Submitted PDF consists of 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Trans-Domain Digital Twin for Bio-Aware Control of Climate and Energy in Cattle Fattening Barns Using Single-Episode Optimizer Learning

cs.SE ·2026-08-27 ·Mansoorali Amiri
similarity 0.53
Abstract · 26 pages, 13 figures

In closed cattle-fattening barns, the indoor climate and herd growth are mutually interdependent. Temperature, relative humidity, airflow, and ventilation affect thermal comfort, feed intake, metabolic heat production, daily growth, feed efficiency, and energy consumption, while body-weight gain alters the future heat and moisture loads of the barn and, consequently, its ventilation, heating, and energy requirements. This article proposes a trans-domain digital twin framework with single-episode learning capability, customized for bio-aware climate and energy control in a closed cattle-fattening barn. The framework integrates a mechanistic climate simulator, a livestock growth simulator, model predictive control, lightweight reinforcement learning, and structured knowledge memory within a multi-rate temporal-loop architecture. The fast temporal loop operates every five minutes to evaluate actuator decisions and maintain short-term thermal comfort, safety, and energy efficiency, whereas the slow temporal loop provides biological guidance based on daily climatic conditions, feed efficiency, heat production, and growth-limiting factors. The results show that climate, growth, energy, feed, biological guidance, and memory can be linked within a single executable control cycle. Remaining limitations include the need for field validation, improved management of feed pressure, and reduction of abrupt actuator-command variations.

0.27

Real-Time Control of Sustainable Data Centers: A Two-Layer Model Predictive Control Framework with Workload Flexibility and Heat Recovery

eess.SY ·2026-08-17 ·Wenyu Liu, Enea Figini, Mario Paolone
similarity 0.49
Abstract · 22 pages, 14 figures

This paper proposes a two-layer model predictive control (MPC) framework for the real-time operation of data centers integrated with on-site photovoltaic generation, battery energy storage, waste heat recovery, and district heating. The upper layer employs scenario-based stochastic optimization to jointly optimize intraday market participation, workload scheduling, and energy management under uncertainty. The lower layer adopts an adaptive tube-based MPC strategy that compensates short-term disturbances while tracking the dispatch references given by the upper layer. The framework further integrates multi-horizon forecasting to support real-time decision making. Microservice-based simulation studies under representative clear-sky and overcast operating conditions demonstrate that the proposed framework accurately tracks dispatch plans despite fast photovoltaic and workload fluctuations. Compared with single-layer control strategies, the adaptive lower-layer controller substantially reduces real-time dispatch deviations and the associated imbalance costs. In addition, the proposed framework naturally adapts to seasonal operating conditions and responds to carbon-aware operating signals, offering a practical approach for economically efficient, sustainable, and grid-supportive operation of future data centers.

0.29

User-specified Kelvin-hour budgets within model predictive control for energy-efficient buildings: Simulation and field demonstration

eess.SY ·2026-09-06 ·Jicheng Shi, Colin N. Jones
similarity 0.48
Abstract

For energy-efficient building control, model predictive control (MPC) has been widely proposed to reduce energy use while maintaining prescribed indoor temperature bounds. In practice, MPC implementations may still produce temperature-bound violations because of model mismatch, weather-forecast errors, and softened constraints introduced to preserve feasibility. Existing soft- constrained MPC usually handles this trade-off through slack-weight tuning, so users cannot prescribe a violation-severity budget before operation. This paper develops a Kelvin-hour (Kh)-budget MPC that allows users to specify a running-average budget for temperature-bound violation severity. During operation, the controller uses the realized Kh budget surplus or overspend to update the temperature bounds, providing step-by-step budget feedback. We evaluate the method in two high-fidelity BOPTEST simulation cases and in an occupied residential deployment. In the first one-zone case, prescribed budgets produce clear running-average Kh violation responses across predictors and disturbance settings. At a prescribed budget of 0.005 Kh/step, the controller reduces energy use by 31.9% and Kh violation by 36.2% relative to the built-in default controller. In the second coupled two-zone case, separate zone budgets produce zone-level responses, with 18.9%-20.5% energy reduction and 9.4%-64.3% zone-level Kh violation reduction. In the occupied residential deployment, the running-average Kh violations remain close to or below their prescribed budgets under real sensing, actuation, weather, and occupancy conditions.

0.27

A Distributed Energy Relay Framework for Sustainable Drone Missions

cs.DC ·2026-10-13 ·I-Ling Yen, Farokh Bastani, Akeem Mohammed, Agastya Bose
similarity 0.44
Abstract

Limited battery endurance remains a major obstacle to persistent UAV missions. Existing energy-replenishment approaches typically rely on battery-swapping/charging infrastructure or on ground vehicles with accessible road networks - assumptions that may not hold in infrastructure-less regions (ILRs) such as remote wilderness, mountainous terrain, and disaster-stricken areas. We formulate energy resupply in ILRs as a distinct logistics problem, in which energy itself must be projected into a region with no pre-existing infrastructure, and proposes a Distributed Energy Relay Framework that enables cooperative energy delivery using porter drones. The framework introduces a Transportation-by-Relay-and-Cache (TRC) mechanism, in which drones relay battery resources toward a mission location. Additional models are developed to characterize battery transportation capacity, relay amplification, energy-delivery capability, operational cost, and reliability. Based on these models, stations independently evaluate their delivery capability and submit bids to a mission coordinator, which selects an energy-delivery coalition that satisfies mission requirements while minimizing cost. Analytical evaluation illustrates the impact of battery characteristics and drone capabilities on energy projection and demonstrates the effectiveness of the proposed framework for sustaining UAV missions in ILRs.

0.20

Safe Greenhouse Climate Control Using Lagrangian-Constrained PPO with Kolmogorov-Arnold Networks

cs.AI ·2026-09-28 ·Hangzun Liu, Yuling Fan, Fang Tian, Zhilong Bie, Zaiwen Feng +1 more
similarity 0.44
Abstract · 12 pages, 5 figures

Greenhouse climate control balances economic return with maintaining temperature, humidity and CO2 within crop-adapted growth ranges. Conventional reinforcement learning (RL) greenhouse controllers use fixed reward penalties to limit climate constraint violations, yet such heuristic penalties cannot explicitly constrain long-term cumulative violations. Poorly tuned weights either lead to overly conservative policies and lower yields, or fail to suppress persistent climate deviations that harm photosynthesis and induce crop diseases. To address this issue, we formulate greenhouse climate regulation as a Constrained Markov Decision Process (CMDP) and use a Lagrangian safe RL framework RCPO-PPO to separate economic optimization and cumulative safety constraints, enabling adaptive penalty adjustment without manual tuning. To handle strong nonlinear, time-varying coupling between greenhouse microclimate and crop growth, Kolmogorov-Arnold Networks (KANs) replace Multi-Layer Perceptrons (MLPs) as policy and value approximators for improved nonlinear representation. Sinusoidal cyclic time features are embedded in observations to capture diurnal environmental periodicity. Simulations use a classic winter lettuce greenhouse model driven by 40-day real weather disturbances. Compared with vanilla penalty-based PPO, our method cuts cumulative climate violations by 18.65% and raises lettuce economic profit by 2.91%, keeping violations stable near the safety threshold. This decoupled CMDP optimization with KAN-based policy representation mitigates long-term climate risks and boosts planting profits, offering a constraint-aware control strategy for precision greenhouse cultivation.

0.28

Utility-Driven Spatial Data Sampling for UAV-Assisted Scientific Smart Farming

cs.GT ·2026-09-04 ·Keiwan Soltani, Sajal K. Das
similarity 0.43
Abstract · 2 pages, 1 figure. Accepted and presented as a poster at the 38th International Conference on Scalable Scientific Data Management (SSDBM 202…

Large smart-farming deployments generate continuous scientific data from spatially distributed sensors, including soil, humidity, temperature, crop-health, and pest-related measurements. In vast agricultural fields, however, an energy-constrained unmanned aerial vehicle (UAV) often cannot collect data from every sensor during each mission. Existing UAV-assisted collection methods typically optimize coverage, route length, data volume, or freshness, but they do not always distinguish between data that is merely available and data that is scientifically valuable. This poster introduces a utility-driven spatial sampling framework for UAV-assisted smart farming. The field is partitioned into grid cells, each sized according to the UAV ground coverage range. After an initial exploration phase, each cell receives a scientific utility score based on freshness, redundancy, anomaly likelihood, and model uncertainty. The UAV then selects and visits a subset of high-utility cells under battery and return-to-base constraints. The proposed framework reframes UAV-based collection as adaptive scientific data management rather than exhaustive sensing.

0.30

From Learning to Control: Data-Driven Multi-Agent Reinforcement Learning for Multivariable Control in a Microalgae Bioprocess

eess.SY ·2026-09-08 ·Juan D. Gil, Ehecatl Antonio Del Rio Chanona, José Luis Guzmán, Manuel Berenguel
similarity 0.42
Abstract · Conference - IFAC WC 2026

Effective control of bioprocesses is particularly challenging due to the intrinsic nonlinearity and dynamic variability of living-cell systems. In microalgae-based photobioreactors (PBRs), maintaining stable pH and dissolved oxygen (DO) levels is critical for optimal growth and productivity, yet their strong coupling and sensitivity to environmental fluctuations make multivariable control difficult. This study proposes a novel hybrid offline-online Multi-Agent Reinforcement Learning (MARL) framework for simultaneous pH and DO regulation, leveraging Deep Deterministic Policy Gradient (DDPG) agents to achieve a fully data-driven and model-free control solution. The agents are trained using historical data generated by an expert system, eliminating the need for direct experimentation with the environment. After deployment, the agents operate autonomously, continuously fine-tuning their policies daily to adapt to evolving process dynamics and reject fast transient disturbances. Experimental validation in an open, industrial-scale PBR at the University of Almeria demonstrated the framework's capability to maintain stable operation under realistic conditions. The results confirm that model-free MARL control provides a robust and adaptive alternative for complex bioprocess environments.

0.25

Energy and CO2 Footprint of Climate Model Intercomparison Projects

cs.CY ·2026-08-24 ·Sergi Palomas, Pablo Aparici, Gladys Utrera, Mario Acosta
similarity 0.42
Abstract · 5 pages, 2 figures. Accepted at the 2nd International Workshop on Low Carbon Computing (LOCO 2026), Lancaster University, United Kingdom, 10…

Earth System Models (ESMs) rely heavily on High-Performance Computing (HPC) resources to simulate global climate. As these models evolve, their computational demands continue to grow, driven by three factors: (1) finer spatial grid resolutions, (2) the integration of complex biogeochemical processes (e.g., atmospheric chemistry, interactive vegetation, land use, and ice sheets), and (3) larger climate ensembles to manage uncertainty. Historically, growth in peak computing performance (FLOP/s) has outpaced improvements in energy efficiency (FLOP/Watt), increasing total HPC power consumption. Despite the central role of Model Intercomparison Projects (MIPs) in climate research, quantifying their computational and environmental costs has received limited systematic attention. This paper examines the evolution of climate model carbon accounting from voluntary post-hoc estimation in the Coupled Model Intercomparison Project phase 6 (CMIP6) to standardized accounting under the newly established CMIP7 Task Team on Energy Consumption. Using high-resolution Destination Earth simulations on MareNostrum 5, we empirically evaluate how different accounting boundaries (operational, active-only, and embodied carbon) impact reported energy, carbon emissions, and financial costs. Finally, we outline key methodological considerations for standardizing energy and carbon accounting for Model Intercomparison Projects (MIPs).

0.55