CS Paper Radar

Allen--Cahn Residual-Constrained Topology Optimization via an Augmented Lagrangian Method

Run Du, Xuan Xiao, Wenming Cheng, Zeqiang Zhang

cs.CE math.OC ·submitted 2026-11-02 01:42 UTC · v1
benchmark

Abstract

This paper presents a residual-constrained topology optimization framework that controls interface transition bandwidth without requiring external density filters. The steady conserved Allen--Cahn (AC) equation is formulated as an equality residual constraint and solved via a mass-weighted Augmented Lagrangian Method (ALM) coupled with the Method of Moving Asymptotes (MMA). A closed-form chemical potential projection eliminates the constant residual mode, ensuring algebraic compatibility with external volume targets. Variational sensitivity analysis reveals a symmetric-plus-rank-one Jacobian that yields matrix-free sensitivities without additional adjoint PDE solves, reducing residual sensitivity overhead to only 0.11% of the state elasticity solve time in 3D. Systematic 2D benchmarks confirm that interface bandwidth is governed intrinsically by reaction--diffusion parameters across mesh refinements. While diffuse interfaces incur a continuous compliance elevation (1.4%--12.3%), a volume-preserving 0/1 post-processing audit across 48 benchmark cases demonstrates that this gap stems primarily from intermediate-density penalization: binarized AC-ALM designs achieve equal or superior stiffness in 45 configurations (averaging 1.2% stiffer than SIMP). Simultaneously, single-node hinges and strut fragmentation are substantially suppressed compared to unregularized baselines. Three-dimensional benchmarks further demonstrate practical spatial viability for complex structures.

Comment
43 pages, 14 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Differentiable High-Order Mesh $r$-Adaptivity

cs.MS math.NA ·2026-11-17 ·Ketan Mittal, Julian Andrej, John Camier, Veselin Dobrev, Tzanio Kolev +2 more
benchmark similarity 0.54
Abstract · 14 pages, 10 figures, 2 tables

High-order mesh r-adaptivity typically entails minimizing a nonlinear functional using its gradients and, for Newton-based methods, its Hessian. These derivatives can be expensive to derive, must be updated with any changes to the functional, and errors in the derivatives directly impact the convergence of r-adaptivity. Additionally, derivatives of the r-adaptivity operator are required for consistent sensitivity analysis for inverse problems. This work develops a framework for differentiable r-adaptivity based on the Target-Matrix Optimization Paradigm. Given a pointwise functional defining the local mesh-adaptation objective, the proposed framework uses $\partial$FEM to automatically generate pointwise first- and second-order derivatives. These local derivatives are then assembled into a global gradient vector and a Hessian operator through the finite element operator decomposition. The derivative kernels support portable CPU and GPU execution, with partial assembly and tensor sum factorization enabling matrix-free application of the Hessian operator. The framework also provides consistent sensitivities of the r-adaptivity operator through automatically generated mixed derivatives and implicit differentiation of the mesh stationarity equations. Numerical experiments show GPU solve times comparable to those of hand-derived TMOP implementations on a benchmark problem, improvement in r-adaptivity convergence due to accurate computation of the derivatives, and demonstrate the use of mesh sensitivities for material-interface identification in an inverse heat-conduction problem.

0.42

KATOsuper: Surrogate-accelerated neural topology optimization with sensitivity-consistent Fourier neural operators

cs.CE cs.AIcs.LGmath.NA ·2026-09-23 ·Shengyu Yan, Jasmin Jelovica
benchmark similarity 0.53
Abstract · 32 pages, 24 figures, 7 tables

Topology optimization (TO) remains computationally intensive due to repeated finite element analysis (FEA) evaluations required at each iteration. While neural network-based surrogates offer potential acceleration, existing approaches often suffer from gradient inconsistency between predicted objectives and sensitivities, leading to optimization instability. This work presents KATOsuper, an objective-agnostic framework that couples neural-reparameterized topology optimization with a Sensitivity-Consistent Fourier Neural Operator (SC-FNO). The framework employs the forward_split architecture, which derives deployed sensitivities via automatic differentiation through the predicted objective field and thereby preserves consistency between the predicted objective and the gradient used for optimization. The case studies include three 2D benchmark problems and three 3D structures considering compliance or stress minimization. A physics-informed multi-channel input encoding with Fourier position embedding enables resolution-invariant learning, supporting zero-shot extrapolation beyond the training resolution, with useful performance at moderate scaling factors and topology-preserving exploration at up to 64x without retraining. The framework extends to 3D through KATO3D, featuring novel KANConv3D blocks with learnable B-spline activations. KATOsuper demonstrates 15--110x deployment-time speedup over MATLAB baselines while maintaining competitive optimality, with the clearest gains observed in complex 3D and stress-optimization cases. The insight that sensitivity direction matters more than magnitude enables robust optimization even with approximate physics evaluation, extensible to other differentiable physics-driven design objectives.

0.58

ManifoldCache: Training-Free Diffusion Acceleration via Constraint Manifold Caching

cs.AI cs.LG ·2026-10-03 ·Prashant Pandey, Devineni Sri Venkatraya Chowdary, Brejesh Lall
theory similarity 0.53
Abstract

Diffusion models for structured scientific generation must produce samples satisfying hard geometric constraints imposed by physics, chemistry, or biology, yet inference in these settings is prohibitively slow, demanding hundreds to thousands of neural-function evaluations per sample. We unify eight state-of-the-art models spanning medical volumetrics, molecular conformations, protein backbone design, crystal structure prediction, and multi-view 3D scenes under a single abstraction, Constraint-Manifold Diffusion Models (CMDMs), in which the target distribution is supported on a manifold defined by an externally specified constraint map. All existing acceleration families fail on this class: quantization exhausts memory on high-dimensional volumetric operators; pruning breaks constraint fidelity; fast ODE solvers allow trajectories to drift off the constraint manifold; and feature-caching heuristics are blind to constraint geometry, inducing mode confusion in the high-noise regime. We introduce ManifoldCache, the first training-free, data-free accelerator designed from first principles for CMDMs. The key insight is that the conditional score decomposes orthogonally into a normal component, which enforces constraint satisfaction, and a tangential component, which navigates within the manifold. Exploiting this structure, we prove that the noise-schedule midpoint is a sharp safe-caching boundary: caching before it incurs provably bounded error, while caching after it guarantees a strictly positive fraction of trajectories suffer mode confusion, a gap that persists up to the boundary. We further prove that deeper network blocks admit provably larger certified cache strides within the safe phase, as a consequence of the score decomposition propagating through block Jacobians. The resulting schedule requires no calibration data, along with zero training overhead.

0.27

lapanda: A Matrix-Free Differentiable Solver for Nonconvex Constrained Optimization Layers

cs.LG math.OCeess.SY ·2026-09-27 ·Yuankun Chen, Zifei Nie, Kangyu Lin, Ján Drgoňa, Liang Wu
similarity 0.52
Abstract

Differentiable optimization brings the structural guarantees of mathematical optimization to network pipelines, allowing them to be trained end-to-end. However, its application remains challenging for nonconvex constrained problems, as existing differentiable solvers often suffer from limited modeling expressiveness due to their reliance on specialized problem structures, while also incurring substantial computation time and memory overhead in both the forward and backward passes. To address these challenges, we propose lapanda, a matrix-free differentiable solver for nonconvex optimization with general constraints. It reformulates the problem to a sequence of augmented Lagrangian subproblems, each handled by a first-order inner solver through a proximal averaged quasi-Newton algorithm with adaptive linesearch, thus enabling efficient forward optimization. We establish local well-posedness of the solution map and convergence of the outer iterations, and further derive a sensitivity alignment between the original problem and the final subproblem in the backward pass, demonstrating that the subproblem sensitivity, which can be computed efficiently in a matrix-free manner, provides a principled approximation to the exact optimizer sensitivity. We evaluate lapanda on nonconvex constrained Rosenbrock benchmarks, imitation learning with several representative constrained optimal control problems, and embedded robotic obstacle-avoidance tasks. Compared with state-of-the-art differentiable solvers, lapanda delivers substantial reductions in computation time and memory footprint while maintaining reliable constraint satisfaction and learning performance.

0.18

Characterizing and Mitigating Distributional Bias in Physics-Informed Generative Models

cs.LG ·2026-10-12 ·Tanja Bien, Samir Darouich, Lluís Pastor-Pérez, Vinh Tong, Loay Mualem +1 more
code/data similarity 0.51
Abstract

Physics-informed generative models augment a data-fitting objective with residual penalties that encourage physical constraints to hold in generated samples. However, improving constraint satisfaction need not improve fidelity to the data distribution. We study this conflict in residual-regularized diffusion models and identify two possible consequences. First, the same prediction error can incur different residual costs near different feasible states, preferring states with lower residual sensitivity (avoidance). Second, this preference can extend to feasible states outside the data support, where the residual also vanishes (leakage). Motivated by this analysis, we propose a data-anchored penalty that weights prediction errors by the residual Jacobian at the clean training sample and normalizes the resulting magnitude. This removes the incentive to relocate to less sensitive states without changing the model architecture or sampling procedure. Experiments on a controlled synthetic system, three PDE systems, and molecular transition-state generation with flow matching demonstrate the benefits of anchoring. Code is available at https://github.com/TanjaBien/anchored_diffusion.

0.24

ContactIPM: A Structure-Exploiting Interior-Point Solver for Contact-Implicit Trajectory Optimization

cs.RO ·2026-08-12 ·Yucheng Chen
benchmark similarity 0.51
Abstract

Contact-implicit trajectory optimization avoids prescribing contact sequences, but yields mathematical programs with complementarity constraints (MPCCs) whose degeneracy challenges conventional primal--dual solvers. Existing contact-specific methods improve robustness to this degeneracy but do not leverage a stagewise optimal-control factorization and primal--dual consistency, while structure-exploiting optimal-control solvers are not designed for complementarity constraints. We show that these capabilities can be combined in a single primal--dual method. ContactIPM identifies complementary inequality pairs, embeds them through a barrier-coupled elastic interior relaxation, eliminates slack and dual variables stagewise, and solves the reduced Newton system using a Riccati recursion. A fixed multi-phase MPCC recovery schedule provides four continuation and restart attempts from naive initializations, while termination is gated by the unrelaxed physical complementarity residual. We compare ContactIPM with two contact-specific MPCC solvers, CRISP and IMPACT, using matched benchmark conditions and common post-solve acceptance criteria. On four fixed CRISP benchmark cases, ContactIPM is $2.17$--$8.87\times$ faster over 20 paired timing repetitions per case and achieves higher success on the Push Box and Push-T robustness suites. Against IMPACT, ContactIPM is \(2.96\times\) faster on Push T and \(4.91\times\) faster on Cart Transport, but \(4.46\times\) slower on Push Box. In 50 closed-loop Push Box rollouts spanning model mismatch, measurement noise, initial-pose errors, and state resets,

0.04

Shape optimisation of nonlinear Naghdi shells on discrete geometries

cs.CE math.NA ·2026-08-11 ·Ado Farsi, Alberto Paganini
benchmark similarity 0.51
Abstract · 19 pages, 10 figures, 6 tables. Revised manuscript submitted to Computers & Structures

We present an automated framework for the shape optimisation of a geometrically nonlinear, five-parameter Naghdi model on faceted triangulations. By recovering directors numerically, we remove the requirement for an analytic or spline parameterisation of the mid-surface, whereas partial selective reduced integration alleviates locking. The residual and tangent of symbolic energies are generated in an automated fashion building on Firedrake's and UFL's symbolic differentiation capabilities. Additionally, UFL's and pyadjoint's algorithmic differentiation enables automated first and second shape derivative evaluations that are verifiably correct via Taylor tests. The forward model agrees with the Sze/Abaqus semi-cylinder reference. A three-model mesh-refinement study indicates that geometry recovery and surface faceting have small effects on the predicted deflection. Numerical experiments show that 100 trust-region iterations suffice to reduce the squared-displacement functional of a semi-cylinder by 98.4% and the elastic strain energy of a bracket by 94.6%. The latter result is validated against a COMSOL benchmark. Non-uniqueness of optimal shapes is demonstrated by optimising initial designs subject to small perturbations. Comparisons with linearised designs distinguish optimisation performance from the accuracy of the predicted nonlinear response.

0.12

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.51
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22