CS Paper Radar

Green Composites for Safer and Durable Water Pipelines

Djebbara Benzerga, Faycal Sotehi, Adel Chouiter, Abdelkader Haddi, Nahla Benzerga

cs.CE ·submitted 2026-11-02 09:37 UTC · v1
top venueunusual

Abstract

The intensifying water shortage in Algeria makes clear the need of novel, sustainable strategies to protect distribution networks. Current infrastructure struggles with frequent failures, particularly leaks stemming from corrosion or handling damage during transport and installation. High-density polyethylene (HDPE) has become a material of choice because it handles these challenges well; it is cost-efficient, flexible, and tough enough to withstand harsh environments.This work investigates the failure risks of HDPE pipelines manufactured by ITP Alg{é}rie -- Innovation Transformation Polym{è}re. Mechanical tests were performed on HDPE 100 to determine its fundamental properties, including burst tests under internal pressure and load/unload experiments aimed at establishing a material-specific damage law revealed the dominant degradation mechanisms that occur under different operational and environmental conditions. Based on these findings, a predictive numerical model was developed to simulate damage progression and anticipate potential failures in service. This study introduces a unique hybrid composite patch designed for the precise rehabilitation of compromised pipeline sections. It shows strong promise for rebuilding the mechanical integrity of pipes, which is vital for maintaining a safe and long-lasting drinking water supply.

Journal ref
WSEAS Transactions on Environment and Development, 2026, 23, pp.1

Closest papers

Nearest neighbours by meaning across the whole index.

Compound Environmental Operating Stress and Cyber-Induced Pump Disruption in Water Distribution Networks: Matched Hydraulic Impacts, Service Continuity, and Sustained Recovery

cs.CR eess.SY ·2026-10-26 ·Halil Dursunoglu, Fatma Dursunoglu
benchmark similarity 0.43
Abstract

Digitally controlled water distribution systems must maintain service during disruptions, yet restoring water delivery does not necessarily ensure hydraulic recovery. This study evaluates cyber-induced pump outages under hypothetical environmental operating stress using two EPANET benchmark networks (Net1 and Net3) simulated with the Water Network Tool for Resilience. The experimental design comprises 288 simulation records (240 distinct configurations), including 192 verified attack scenarios, with four- and twelve-hour outages, six hydraulic configurations, and four mitigation strategies. All attack scenarios satisfied pump-shutdown verification and pre-attack hydraulic-equivalence criteria. Twelve-hour outages produced an average of 404.96 m$^3$ of unmet demand in Net1, while Net3 maintained full modeled demand delivery despite pressure deviations. Sustained pressure recovery occurred in 103 of 192 scenarios, with 65 exhibiting subsequent relapse, whereas all scenarios satisfied the post-outage water-service recovery criterion. Combined mitigation eliminated unmet demand in evaluated Net1 scenarios, while outage shortening achieved the highest sustained-pressure-recovery count. These findings highlight network-dependent resilience and the distinction between service restoration and hydraulic recovery. Environmental stress scenarios represent sensitivity assumptions rather than empirically calibrated climate impacts.

0.37

Composable, Knowledge-Driven Disservice Propagation for Complex Interdependent Services with a Flow-Allocation Module Validated Against Hydraulic Simulation

cs.CE ·2026-10-19 ·Cristian Curaba, Stefano Grimaz
publishedcode/data similarity 0.42
Abstract · Accepted at Complex Networks and Their Applications 2026 (COMPLEX NETWORKS 2026); supplementary material in ancillary files

Modeling cascading failure across interdependent critical infrastructure requires either a composable physical simulator per domain or a topological abstraction that discards quantity awareness. Simulators are costly, data-hungry, and require detailed calibration per domain; topological abstractions stay data-parsimonious while missing quantity-based behaviors that govern real dynamics. We present, instead, a knowledge-driven propagation architecture in which heterogeneous service dependencies are identified by categories: a general logical propagation resolves multi-dependency and redundancy structures purely from how nodes are categorized, while quantity-aware categories plug in dedicated mechanisms - here, a max-min fair-share flow module for water distribution. Both share one discrete functionality scale and a monotonic update algorithm guaranteeing convergence in finitely many rounds. We assess the flow module by comparing its results with those we get from preexisting pressure-driven simulation with WNTR (Water Network Tool for Resilience) on eight realistic networks across four failure families (clustered damage, capacity-targeted attack, source failure, tank loss). Under capacity-targeted attack and source failure a topological-reachability baseline misses 46% of the truly critical junctions, where the flow module misses 10% and 8% at an average critical-class precision of 0.73. Supplementary materials, code and results are available at: https://github.com/cascade-platform-org/CASCADE

0.46

Life-cycle structural reliability of RC bridge piers under corrosion in a changing climate

cs.PF ·2026-11-16 ·Giuseppe Vittorio Nava, Luca Capacci, Fabio Biondini, Lorenzo Casti
publishedunusualhighly cited similarity 0.41
Abstract

Aging and deterioration processes of structures and infrastructure systems can be severely affected by the long-term evolution of environmental conditions expected in a changing climate. This paper aims at investigating the interaction between climate change and environmental aggressiveness on the probabilistic life-cycle performance of concrete structures under corrosion. A simulation-based framework is proposed for life-cycle structural reliability analysis under climate change scenarios. The framework is applied to a bridge pier with hollow core cross-section exposed to chloride-induced corrosion. The results allow to quantify the impact of climate change on long-term probabilistic structural response and highlight the need for proper modeling of the environmental parameters and climate evolution over the entire lifespan of aging structures for optimal life-cycle maintenance and management of structural and infrastructural facilities.

0.68

Dynamic Centrality Measures for Water Distribution Network Hydraulics

eess.SY math.OC ·2026-09-09 ·MirSaleh Bahavarnia, Salma M. Elsherif, Ahmad F. Taha
similarity 0.40
Abstract

Water distribution networks (WDNs) are susceptible to various failures, including but not limited to human errors, cyber-attacks, and network modifications, necessitating the vulnerability analysis of WDNs. Graph-theoretic centrality measures---as a main class of centrality measures---aim to rank the network components solely based on their influence (i.e., criticality) on the WDN topology in the case of input changes, while overlooking the WDN dynamics. To overcome such a limitation, this paper uses a control-theoretic centrality measure to identify the network's most and least influential pipes in WDNs, by simultaneously incorporating the dynamics and topology of the WDN. First, given a WDN modeled by nonlinear differential-algebraic equations (NDAEs) consisting of transient flow dynamics as differential equation (DE) and conservation of water mass as algebraic equation (AE) and considering the pipe flow rates as states of the state-space (SS) representation, we extract a linearized system modeled by linear ordinary differential equations (LODEs) around the equilibrium (i.e., steady) flow rate vector. Second, treating pipe flow rates as SS nodes (states), we introduce a node centrality-based measure, namely \textit{vulnerability vector (VV)}, to rank the network pipes based on their influence on the dynamics and topology of the WDN in the case of input changes. In particular, the network's most and least influential pipes can be identified through such a centrality-based approach. This enables water engineers to understand the WDN's vulnerability better and effectively prioritize the maintenance and operational efforts on the most influential pipes within the WDN.

0.25

Reliability Assessment of FRP-RC Columns Using AK-MCS with a Piecewise Two-Branch Approach

cs.CE stat.APstat.CO ·2026-10-25 ·Arndt Goldack, Richard Koehler, Ahmed Usama Syed
similarity 0.39
Abstract · 22 pages, 5 figures

Slender concrete columns reinforced with fiber-reinforced polymer (FRP) bars fail at medium to high axial load levels either by concrete crushing or by loss of stability, while the tensile strains in the reinforcement remain far below the rupture strain. Each non-linear finite element (FE) analysis yields only the capacity of the governing failure mode, and the governing mode changes over a broad zone in which both capacities are nearly equal. Both characteristics conflict with active-learning Kriging-assisted Monte Carlo simulation (AK-MCS), which assumes a single, smooth limit-state function. This paper proposes a piecewise, two-branch AK-MCS framework in which each failure mode is represented by its own Kriging model, trained only on the FE analyses in which that mode governs, and the governing prediction is the minimum of both. Safeguards against data starvation keep rarely governing branches usable. After convergence, additional FE analyses are placed based on a leave-one-out calibration check and on the width of the confidence interval on the reliability index. A design-point search on the surrogate and importance sampling at the design points provide the reliability index even where direct Monte Carlo simulation finds no failure. For an FRP-reinforced concrete column example with mixed failure, 79% and 62% of the training points lie near the mode boundary. The reliability index from the design-point search agrees with the Monte Carlo estimate to within 0.05, and an FE analysis at the design point confirms the surrogate to within 0.6%.

0.29

Convergence-Aware Pareto Selection of Covariate Scaling Transformations for Markov Deterioration Hazard Models: Evidence from Bridge Inspection Data

cs.LG stat.ME ·2026-09-24 ·Takato Yasuno, Keita Kobayashi, Ryuta Sakaguchi
unusual similarity 0.39
Abstract · 19 pages, 2 figures, 5 tables

Maximum likelihood estimation of Markov deterioration hazard models for infrastructure asset management is sensitive to the numerical conditioning of explanatory covariates, yet production pipelines often adopt a single scaling convention without systematic justification. We study four covariate scaling transformations---baseline max scaling, min-max scaling, z-score scaling, and Box-Cox transformation with a training-derived positivity shift---applied to an Exponential Hazard Markov (EHM) model estimated via L-BFGS-B on bridge inspection transition data.

0.51

A Physics-informed Neural Network Approach for Robust Buckling Load Prediction and Reliability-Based Design of Thin Truncated Conical Shells

cs.LG ·2026-08-22 ·Devasmit Dutta, Budhaditya De, Rohan Majumder, Sudip Kumar Mishra
similarity 0.39
Abstract

Thin-walled truncated conical shells are widely used in aerospace, marine, offshore, and lightweight infrastructure systems due to their high strength-to-weight ratio and geometric efficiency. Their buckling resistance under axial compression, however, is highly sensitive to geometric imperfections, manufacturing tolerances, material variability, and nonlinear instability effects. Conventional design procedures rely on conservative knockdown factors (KDFs), such as those recommended in NASA SP-8019, which do not explicitly account for shell geometry, fabrication quality, data uncertainty, or target reliability. This study develops a physics-informed neural network (PiNN) framework for predicting critical buckling loads of thin truncated conical shells and integrates the trained surrogate within a reliability-based design (RBD) formulation. The model combines geometric and material descriptors with mechanics-informed features derived from shell stability theory and the localized reduced stiffness method (LRSM). A physics-informed loss function penalizes mechanically inadmissible predictions exceeding the theoretical elastic buckling load. The framework is trained and evaluated using 133 experimental Mylar conical shell tests under axial compression. Compared with a conventional deep neural network (DNN), the PiNN improves predictive accuracy, reduces mean absolute error, and enhances physical consistency. The trained PiNN is then used to evaluate reliability indices and calibrate safety-consistent KDFs for prescribed target reliability levels. Results demonstrate that the PiNN-RBD framework provides an efficient approach for uncertainty-aware design of imperfection-sensitive shell structures.

0.49

BRIDGE: Bridging Routine Inputs and Digital modelling for Geotechnical Engineering

cs.CE ·2026-10-02 ·Roshan Philip Saji, Waleed El-Sekelly, Tarek Abdoun, Mostafa E. Mobasher
similarity 0.38
Abstract

The mechanical properties needed for geotechnical design require laboratory tests and are thus available for far fewer field samples than routinely measured basic (index) properties which are available for nearly every sample. We term this difference as the characterization gap. Purely data-driven models do not explicitly enforce physical laws and may be unreliable beyond their training domain, while direct constitutive calibration preserves physical consistency but requires advanced laboratory data and expert judgment. We therefore propose BRIDGE (Bridging Routine Inputs and Digital modelling for Geotechnical Engineering) a modular framework that predicts mechanical properties from routinely available basic properties. BRIDGE screens the dataset for outliers and non-physical responses, bins the retained samples into Cells, and selects a small calibration dataset from each Cell, while the remaining samples are used for validation. A mechanical model is then calibrated for each calibration sample, and the converged calibrations collectively define the mechanical surrogate of the Cell together with its parameter ranges and the corresponding predictive envelope in the mechanical property space. A Cell is validated when most validation samples fall within this envelope, whereupon the surrogate can predict the mechanical property ranges of new samples whose basic properties lie within the Cell. In this work, we adopt a finite element implementation of the Extended Cam-Clay (ECC) constitutive model as the mechanical model, whose four parameters are calibrated in a multi-stage process. Applied to the Tokyo-CLAY/14/67760 database, BRIDGE predicts the mechanical properties of an entire Cell from calibrations of just 10 to 20% of its samples. Finally, since the mechanical model, the binning criteria, and the sampling method are components of BRIDGE, the framework is easily extensible.

0.25