CS Paper Radar

Life-cycle structural reliability of RC bridge piers under corrosion in a changing climate

Giuseppe Vittorio Nava, Luca Capacci, Fabio Biondini, Lorenzo Casti

cs.PF ·submitted 2026-11-16 11:30 UTC · v1
publishedunusualhighly cited

Abstract

Aging and deterioration processes of structures and infrastructure systems can be severely affected by the long-term evolution of environmental conditions expected in a changing climate. This paper aims at investigating the interaction between climate change and environmental aggressiveness on the probabilistic life-cycle performance of concrete structures under corrosion. A simulation-based framework is proposed for life-cycle structural reliability analysis under climate change scenarios. The framework is applied to a bridge pier with hollow core cross-section exposed to chloride-induced corrosion. The results allow to quantify the impact of climate change on long-term probabilistic structural response and highlight the need for proper modeling of the environmental parameters and climate evolution over the entire lifespan of aging structures for optimal life-cycle maintenance and management of structural and infrastructural facilities.

Journal ref
Eighth International Symposium on Life-Cycle Civil Engineering (IALCCE 2023), Politecnico di Milano, Jul 2023, Milan, Italy. pp.1625 - 1633

Closest papers

Nearest neighbours by meaning across the whole index.

Reliability Assessment of FRP-RC Columns Using AK-MCS with a Piecewise Two-Branch Approach

cs.CE stat.APstat.CO ·2026-10-25 ·Arndt Goldack, Richard Koehler, Ahmed Usama Syed
similarity 0.47
Abstract · 22 pages, 5 figures

Slender concrete columns reinforced with fiber-reinforced polymer (FRP) bars fail at medium to high axial load levels either by concrete crushing or by loss of stability, while the tensile strains in the reinforcement remain far below the rupture strain. Each non-linear finite element (FE) analysis yields only the capacity of the governing failure mode, and the governing mode changes over a broad zone in which both capacities are nearly equal. Both characteristics conflict with active-learning Kriging-assisted Monte Carlo simulation (AK-MCS), which assumes a single, smooth limit-state function. This paper proposes a piecewise, two-branch AK-MCS framework in which each failure mode is represented by its own Kriging model, trained only on the FE analyses in which that mode governs, and the governing prediction is the minimum of both. Safeguards against data starvation keep rarely governing branches usable. After convergence, additional FE analyses are placed based on a leave-one-out calibration check and on the width of the confidence interval on the reliability index. A design-point search on the surrogate and importance sampling at the design points provide the reliability index even where direct Monte Carlo simulation finds no failure. For an FRP-reinforced concrete column example with mixed failure, 79% and 62% of the training points lie near the mode boundary. The reliability index from the design-point search agrees with the Monte Carlo estimate to within 0.05, and an FE analysis at the design point confirms the surrogate to within 0.6%.

0.29

Finite Element Model Updating-based Load Rating of Bridges with Incomplete As-Built Information

cs.CE ·2026-08-31 ·Mehrdad S. Dizaji, Devin K. Harris, Mohamad Alipour, Abdou Ndong, Osman Ozbulut +1 more
unusual similarity 0.46
Abstract · 33, 18

Load rating is the engineering process of determining the safe load-carrying capacity of an existing bridge structure often through analysis of its load-bearing members and their cross sections. However, when structural drawings and details of the structure are missing or insufficient for such calculations, alternative solutions must be used to infer the capacity. This study proposes a rational and consistent engineering solution for capacity inference based on structural identification (St-Id). The proposed approach uses finite element model updating (FEMU) to estimate the unknown characteristics of structures for use in an analytical load rating, which requires the development of an initial model developed in ABAQUS that can be updated based on experimental test data. ABAQUS allowed for the development of an interface with MATLAB, which facilitated the integration of an automatic iterative parameter optimization algorithm. The optimization algorithm developed in this investigation incorporated the features of a genetic algorithm (GA) and a gradient-based scheme to iterate on the unknown parameters. The proposed approach was evaluated on four in-service highway bridges including two concrete slab and two T-beam structures in varying deterioration condition states, which had sufficient plans available but were treated as having varying degrees of unknown details. The results illustrated that the finite element (FE) model updating approach generated load ratings that were within 0-17% of the target load ratings while alleviating the main challenges of the existing alternatives.

0.27

A Physics-Informed Learning Framework for Linking Microscopic Surface Degradation to Bolted Joint Functional Behavior

cs.AI ·2026-11-06 ·Nehal Afifi, Gerhard Kachel, Sven Matthiesen
publishedcode/dataunusual similarity 0.45
Abstract · 10, Proceedings of the ASME 2026 International Mechanical Engineering Congress and Exposition (IMECE 2026), November 8-12, 2026, Vancouver, …

Returned products in circular engineering often have heterogeneous degradation histories, making remaining function difficult to assess. For bolted joints, corrosion alters surface morphology, contact, friction, preload retention, and mechanical response. This paper presents a physics-informed multimodal framework for linking microscopic and camera-based degradation observations to functional indicators of corroded bolted joints. The workflow defines the corrosion failure mode, generates synchronized inspection and functional-response records, preprocesses image, roughness, exposure, and joint descriptors, aligns microscopy and camera observations through similarity learning, and constructs a calibrated corrosion-severity field. Partial differential equation (PDE) discovery is applied to this field to identify candidate effective mesoscale laws rather than complete electrochemical mechanisms. The corrosion-evolution model is coupled to a separate functional model, with friction coefficient as the primary target and preload loss included when clamp-force data are available. The contribution is a reproducible pathway for physically constrained assessment of degraded bolted-joint behavior.

0.44

Condition-Based Maintenance of Degrading Assets underIntermittent Accessibility

eess.SY ·2026-09-29 ·Muhammet Ceyhan Sahin, Murat Yildirim, Onur A. Kilic
similarity 0.44
Abstract

Many maintenance models implicitly assume that maintenance can be performed whenever intervention is warranted. In practice, however, environmental uncertainty, such as weather and sea conditions, can make maintenance opportunities intermittent and dynamically evolving. We consider a degrading asset for which preventive maintenance may be performed before failure, but intervention is possible only when the asset is accessible. Accessibility evolves stochastically over time and therefore affects not only whether maintenance can be performed now, but also the value of waiting for future opportunities. We formulate this setting as a finite-state Markov decision process under a long-run average cost criterion and investigate the structure of the optimal maintenance policy. Under monotone degradation and cost conditions, we show that an optimal policy retains a threshold form in asset condition, but unlike a single threshold, the optimal threshold varies with the accessibility state. Thus, intervention depends jointly on the asset condition and the expected evolution of future maintenance opportunities. Through a numerical study motivated by offshore wind turbine maintenance, we examine how accessibility dynamics, degradation characteristics, and economic parameters shape the optimal thresholds and compare the optimal policy with constant-threshold and age-based maintenance policies. In a representative setting, adapting the condition threshold to accessibility reduces long-run average cost by 4.31% relative to an optimized condition-based maintenance policy. Relative to an optimized age-based policy, the optimal policy reduces long-run average cost by 33.95%. The results show that maintenance thresholds are not universal: they should adapt to the degradation and accessibility characteristics of the system, and failing to account for these conditions can lead to substantial cost increases.

0.20

From Laboratory Aging Studies to Field Predictions: Quantifying Uncertainty in Battery Storage Lifetime Predictions

eess.SY ·2026-09-09 ·Melina Graner, Jan Figgener, Andreas Jossen, Holger Hesse
benchmarkcode/data similarity 0.43
Abstract

Predicting how long a battery energy storage system will last is critical for warranty design, maintenance planning and investment decisions, yet degradation models are mostly deterministic and rarely validated against real field data. We apply an open-source probabilistic degradation framework, combined with a cell-to-system approximation, to bridge the gap between cell-level laboratory aging models and system-level field predictions for residential battery energy storage systems with quantified uncertainty. The framework predicts cell-level state-of-health to within 0.4 % mean absolute error, roughly half the error of prior models for this dataset. When applied to field operation data, the framework's predictions are consistent with all three available system-level capacity measurements - a benchmark rarely available for open probabilistic degradation models. Cell-level heterogeneity is approximated by two bounding stress scenarios differing only slightly (a 5 % spread in temperature and a 9 % spread in current). The mean degradation trajectories of the two scenarios reach end-of-life 10 months apart, while the full predicted end-of-life range across both scenarios spans approximately three years, about a third of the expected system lifetime. We link this uncertainty to two drivers. One is a systematic mismatch between laboratory test conditions and field-representative operating stress. The other is variability in the training data itself. These insights translate into concrete, resource-efficient recommendations for future aging study design, supporting more confident predictions of battery lifetime under real-world conditions.

0.17

Data-Driven Modeling of Molten Chloride Corrosion Using Static Test Data

cs.LG cond-mat.mtrl-sci ·2026-11-04 ·Md Mahmudul Hasan Pathik
similarity 0.42
Abstract

Molten chloride corrosion has been studied for decades, yet reliable prediction across different alloys, salts, and test conditions remains difficult. In this work, 291 static molten chloride corrosion experiments reported in the literature were compiled into a structured dataset and used to develop an interpretable machine-learning framework for corrosion-rate predictions. To better represent the differences in salt condition across studies, a Chloride Salt Preparation Index (CSPI) was introduced to bring the reported salt-treatment method, atmosphere control, and pre-exposure impurity condition on a common numerical scale. A blended tree-based ensemble provided the most consistent predictive performance, achieving a cross-validated \(R^2\) of 0.85 and an MAE of 0.41 mg cm\(^{-2}\) day\(^{-1}\). The graded CSPI retained more useful information than a simple purified/unpurified classification and emerged as the dominant model descriptor. Global sensitivity and SHAP analyses further identified exposure time, temperature, and alloy chemistry as important contributors to the model predictions, with several observed trends consistent with the established molten-chloride corrosion behavior. The conformal prediction intervals were well calibrated, providing an estimate of prediction uncertainty in addition to the point prediction. Overall, the framework demonstrates that historical corrosion data can support quantitative, interpretable, and uncertainty-aware prediction when experimental context is represented explicitly, while also highlighting where more consistent reporting and targeted experiments are needed to improve future molten-salt corrosion models.

0.24

Evaluation of AI-based Visual Crack Detection in Steel Bridges Using Probability of Detection

cs.CV ·2026-08-18 ·Andrii Kompanets, Finn Michael Sherry, Remco Duits, Davide Leonetti, H. H. Snijder
unusual similarity 0.41
Abstract · Submitted

Bridge structures are regularly inspected for structural damage such as cracks and corrosion in order to ensure public safety and reduce maintenance costs. Much research has been done on automating this process using computer vision methods, which are often evaluated and compared using metrics such as intersection over union, mean average precision, etc. However, predicting the actual effectiveness of an inspection method within the field of structural engineering from these metrics remains challenging. To enable the systematic use of these increasingly popular methods in engineering practice, evaluating the performance of these methods in a way that is compatible with standard engineering approaches is therefore an urgent necessity. We present a new statistical evaluation framework to allow the comparison of computer vision methods with conventional visual inspection for crack detection in steel bridges. The framework is based on probability of detection curves and can account for the influence of image resolution. We apply this evaluation method to the real-world ``Cracks in Steel Bridges'' dataset, which contains annotated images of cracks in bridge structures. The quantification of the probability of detection and its uncertainty enables a practical assessment of the effect of automated methods for damage detection in structural reliability analyses. In turn, this enables the wide-spread use of automated (AI-based) damage detection in safety critical applications. This evaluation method provides evidence that the proposed computer vision approach approach is robust for the crack detection task and can have a high added value as an addition to conventional visual inspection methods.

0.48

Green Composites for Safer and Durable Water Pipelines

cs.CE ·2026-11-02 ·Djebbara Benzerga, Faycal Sotehi, Adel Chouiter, Abdelkader Haddi, Nahla Benzerga
top venueunusual similarity 0.41
Abstract

The intensifying water shortage in Algeria makes clear the need of novel, sustainable strategies to protect distribution networks. Current infrastructure struggles with frequent failures, particularly leaks stemming from corrosion or handling damage during transport and installation. High-density polyethylene (HDPE) has become a material of choice because it handles these challenges well; it is cost-efficient, flexible, and tough enough to withstand harsh environments.This work investigates the failure risks of HDPE pipelines manufactured by ITP Alg{é}rie -- Innovation Transformation Polym{è}re. Mechanical tests were performed on HDPE 100 to determine its fundamental properties, including burst tests under internal pressure and load/unload experiments aimed at establishing a material-specific damage law revealed the dominant degradation mechanisms that occur under different operational and environmental conditions. Based on these findings, a predictive numerical model was developed to simulate damage progression and anticipate potential failures in service. This study introduces a unique hybrid composite patch designed for the precise rehabilitation of compromised pipeline sections. It shows strong promise for rebuilding the mechanical integrity of pipes, which is vital for maintaining a safe and long-lasting drinking water supply.

0.47