CS Paper Radar

LumiTac: Compact, High-Rate Six-Axis Optical Tactile Sensing for Human-Robot Interaction

Hao Wu, Haotian Guo, Yu Feng, Yutong Wang, Jianshu Zhou

cs.RO ·submitted 2026-11-04 04:24 UTC · v1

Abstract

Integrating six-axis tactile feedback into robotic interfaces requires compact sensors with accurate load measurement and rapid online reconstruction. This paper presents LumiTac, a low-profile, camera-free optoelectronic tactile sensor combining spatially distributed illumination with spectral encoding. Five photoemitters and five RGBW photoreceivers are mounted on opposing circuit boards coupled through translucent silicone. Load-induced interlayer motion modulates the internal light field under compression, shear, bending, and torsion. The sensing head measures 12 mm in diameter and 4.75 mm in thickness, weighs less than 2 g, and has a component cost of approximately USD 7. A compact multilayer perceptron reconstructs three force and three moment components from 20 optical channels. Independent testing yielded coefficients of determination (R-squared) of 0.9657-0.9941, with mean absolute errors of 0.054-0.190 N for forces and 0.304-1.419 mN m for moments. Online prediction achieved an average update rate of 303.57 Hz and a median software processing latency of 0.722 ms. Experiments involving combined loading, light weights, and rapid tapping evaluated load tracking, sensitivity to small forces, and transient response, respectively. Robotic demonstrations further validated its applicability to tactile-guided manipulation and physical human-robot interaction. This study paves the way for compact, high-rate optical tactile sensing in robotic manipulation and human-robot interaction.

Closest papers

Nearest neighbours by meaning across the whole index.

SpectraTac: A Compact Camera-Free Optical Tactile Sensor with Distributed Color Sensing

cs.RO ·2026-08-31 ·Hao Wu, Haotian Guo, Yu Feng, Yutong Wang, Yanzhe Wang +1 more
similarity 0.78
Abstract

Tactile sensing is essential for physical interaction in robotics and human--machine systems. However, combining rich tactile information with compact hardware, low cost, and low computational overhead remains challenging. This work presents SpectraTac, a compact, camera-free optical tactile sensor that combines active red--green--blue (RGB) illumination with spatially distributed color sensing. Contact deforms a compliant transparent elastomer and modulates its internal light field, producing spatially differentiated changes in color and intensity. Three distributed color sensors capture these responses as low-dimensional spatio-spectral features, avoiding cameras, imaging optics, and high-dimensional image processing. The device measures 19.2 mm in diameter and 4 mm in height, with a material cost below USD~5. A data-driven decoding framework simultaneously estimates three-dimensional (3D) force and the contact region from the optical measurements. For 3D force prediction, the sensor achieved mean absolute errors (MAEs) of 0.161, 0.164, and 0.429 N along the x-, y-, and z-axes, respectively. The nine-region contact-classification accuracy was 99.9%. We further evaluated real-time 3D force tracking and contact-region-based human--machine interaction through an interactive control task. These results indicate that distributed color-resolved optical sensing offers a compact, low-cost alternative to camera-based tactile sensing for robotics, wearable sensing, and interactive systems.

0.35

Non-Imaging Optical Tactile Sensors for Robotics: Transduction Principles, System Integration, and Robotic Applications

cs.RO ·2026-11-16 ·Hao Wu, Yu Feng, Haotian Guo, Huichan Zhao, Changsheng Wu +1 more
similarity 0.72
Abstract · 35 pages, 9 figures

Non-imaging optical tactile sensors encode contact through changes in optical intensity, wavelength, spectra, or photon counts, offering diverse architectures for robotic touch. Their usefulness depends on whether contact variables can be reliably distinguished from coupled mechanical and environmental effects, and whether the resulting information can be delivered in time to guide action. This review develops a unified framework linking mechanical load transmission, optical encoding, readout, and tactile inference to robotic task requirements. It examines reflective and waveguide-based devices, micro/nanofibers, fiber gratings, interferometric and resonant structures, and mechanoluminescent composites. Three considerations emerge across these approaches. First, high optical sensitivity supports accurate tactile estimation only when target variables remain identifiable under the relevant contact and calibration conditions. Second, spatial coverage and feedback timing must be assessed at the system level, accounting for multiplexing, acquisition, demodulation, and inference. Third, device characterization, offline recognition, and closed-loop robotic performance provide distinct levels of evidence and require different evaluation criteria. Representative studies illustrate how these considerations shape force estimation, contact localization, slip correction and distributed interaction. This review concludes with priorities for calibration transfer, reliable interfaces, scalable readout, and task-based validation, providing a basis for selecting and developing non-imaging optical tactile architectures for robotics.

0.16

LuxTac: A Flexible, Scalable, and Open-Source Optical Taxel Array with Distributed Three-Axis Force Sensing for Tactile Robot Learning

cs.RO ·2026-11-17 ·Md Rakibul Islam Prince, John Pelan, Zhiyuan Zhang, Adyaa Khera, Katherine Pesetski +12 more
code/data similarity 0.71
Abstract · 11 pages, 9 figures, 5 tables. Project page: https://luxtac.github.io

Low-cost tactile arrays have made touch a practical input for robot learning, but piezoresistive designs sense only pressure, while camera-based sensors that also resolve shear are too bulky to tile over a gripper. To solve this problem, we present LuxTac, a flexible, scalable optical taxel array, about 3.5 mm thick and built from off-the-shelf parts. Each taxel is a digital RGBC light-to-digital converter under a translucent white silicone layer capped by an opaque black film, so the back-scattered LED light falls monotonically with local indentation depth. The same board accepts two interchangeable gel cartridges: a plain one for normal sensing, and one with colored walls that encodes the local shear in the color of the returned light, with no camera, magnets, or bump overlay, making LuxTac, to our knowledge, the first optical taxel array to resolve shear at individual taxels. Characterized with an automated CNC indenter and a six-axis force/torque sensor, the normal cartridge responds linearly to force ($R^2$ = 0.999) from 104 mN to at least 5.8 N, with 2.0% repeatability, 5.9% hysteresis, and a taxel-to-taxel variation of 6-10% after normalization. With the shear cartridge, per-taxel models estimate the three-axis force at every taxel; across three indenter shapes and nine held-out sessions, the summed estimates reach $R^2$ = 0.96/0.96/0.92 in x/y/z, each taxel's estimate 0.92/0.93/0.94, and the median shear-direction error is 4.8 degrees. Adding LuxTac pressure readings to an Action Chunking Transformer policy substantially improves peg-in-hole success over a vision-only baseline. Design files, code, and videos are available at https://luxtac.github.io.

0.35

PCTac: Mechanochromic Photonic-Crystal Tactile Sensor for Dexterous Manipulation

cs.RO ·2026-11-09 ·Ruilin Zhang, Xuanshuo Liu, Junzhe Dai, Kefei Wu, Xuhao Qin +4 more
code/data similarity 0.69
Abstract · 9 pages, 7 figures

Modern visuotactile sensors primarily sense contact by imaging the deformation of a compliant interface. Using techniques such as photometric stereo, they can recover detailed contact geometry, often represented as surface normals or depth. However, force-related information typically still needs to be inferred indirectly through calibration, geometric reconstruction, or learned mappings. Mechanochromic photonic-crystal (PC) materials offer an alternative physical encoding mechanism: contact loading changes their periodic microstructure and spectral response, directly transforming local stress into a spatially resolved structural-color field. Despite this potential, PC materials have rarely been explored as visuotactile sensors for closed-loop robot learning. We present PCTac, an open-source mechanochromic PC fingertip that uses a dense hue field as its tactile observation. Loading characterization demonstrates a repeatable relationship between the applied normal load and the observed hue response. We further integrate this representation directly into a Diffusion Policy and evaluate it on three real-robot manipulation tasks. Across 90 physical rollouts, PCTac Hue achieves 68 successes (75.6\%), compared with 60 (66.7\%) for PCTac RGB, 57 (63.3\%) for Wedge RGB, and 29 (32.2\%) for vision-only. PCTac Hue also achieves the highest observed success rate on each evaluated task, including Perturbed Test-Tube Insertion, where it achieves 16/30 successes versus 13/30 for tactile RGB baselines and 1/30 for vision-only. These results demonstrate the potential of mechanochromic structural color as a compact, load-sensitive tactile representation for robot learning and closed-loop manipulation. Project page: https://bey0ndt1me.github.io/PCTac-page/.

0.26

Tactile Reconstruction of Contact Task Frames and Forces for Hybrid Force/Motion Control

cs.RO ·2026-10-07 ·Antonio Rapuano, Simone Orelli, Barbara Bazzana, Antonio Franchi, Alessandro De Luca
similarity 0.65
Abstract · 14 pages, 9 figures, 7 tables. Video: https://youtube.com/playlist?list=PLejKMZmW8AvI. Dataset: https://doi.org/10.5281/zenodo.23209032

Hybrid force/motion control requires knowledge of the interaction force and of a task frame defining the force- and motion-controlled directions. These quantities are usually obtained from force/torque sensing or model-based residuals, often assuming also a nominal environment model. This work addresses the online estimation of the contact force and a possibly time-varying task frame using only soft optical tactile sensing, under the assumption of locally planar contact with a negligible contact moment. The proposed method maps a single image of the deformed elastomer of a soft optical tactile sensor to observable contact variables: indentation depth, two surface-to-sensor tilt angles, and 3D contact force, each with a per-sample uncertainty estimate. The mapping is learned through a self-labeling acquisition procedure, in which a manipulator imposes controlled contacts while an auxiliary Force/Torque sensor is used offline to provide ground-truth labels. The tactile measurement is then fused with robot proprioceptive data in an Extended Kalman Filter, producing a continuously updated estimate of the contact task frame and of the interaction force. Control experiments with a DigiTac sensor mounted on a UR10 manipulator demonstrate closed-loop contact force regulation against a flat rigid board in linear and angular motion by a human operator, with touch as the only exteroceptive feedback.

0.23

VecTile: A Low-Cost Flexible Tactile Array for 3-DoF Force Sensing

cs.RO ·2026-10-22 ·Jian Hou, Xin Zhou, Adam J. Spiers
similarity 0.64
Abstract · 8 pages, 8 figures. Submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Tactile sensing provides robots with contact information difficult to obtain from vision alone. Shear force is particularly important for understanding tangential contact, guiding corrective motions, and maintaining grasp stability, yet flexible and low-cost tactile arrays often measure only normal force. We introduce VecTile, a low-cost, 6 mm thin, flexible tactile array capable of three-axis force sensing. VecTile combines a piezoresistive layer with passive silicone nubs that convert normal and shear forces into distinguishable pressure patterns. The sensor can be fabricated in-house without specialized equipment. The complete system costs less than 35 USD for a 4x4 array. We validate the sensing mechanism through finite element analysis and hardware experiments. In controlled single-taxel tests over 1-5 N normal force and up to 1.5 N shear force, VecTile achieves root-mean-square errors of 0.39 N and 0.16 N for normal and shear forces. A VecTile calibrated while flat retains accuracy when curved, while a five-minute manual calibration is sufficient for practical use. Two applications demonstrate its utility. First, shear readings are sensitive enough to stop a sharp scalpel from puncturing a balloon after contact. Second, the sensor substantially improves Diffusion Policy-guided power-plug insertion. All designs and code will be released upon paper acceptance. Project website: https://jiannnh.github.io/VecTile/.

0.20

GlowTact: Simple and Compact Vision-Based Tactile Sensing with High Sensitivity and Spatial Resolution

cs.RO ·2026-09-26 ·Yuxiang Ma, Megha Tippur, Pengfei Ye, Sandra Q. Liu, Haonan Chen +2 more
similarity 0.64
Abstract · Project webiste: https://glowtact.github.io/

Vision-based tactile sensors (VBTS) provide rich contact information for robotic manipulation, but existing designs can be hard to simplify and adapt to the size and constraints of humanoid fingertips. We introduce \textbf{GlowTact}, a pressure-responsive vision-based tactile sensing mechanism that directly visualizes contact pressure. \textbf{GlowTact} requires only single-color, non-directional illumination, and the raw tactile image directly represents the pressure distribution without explicit geometry reconstruction. This simple sensing principle enables compact, customizable tactile sensors while preserving high sensitivity and rich spatial detail. We demonstrate gram-scale contact detection, accurate normal-force estimation, and reconstruction of fine contact geometry, including M1 screw threads. These results establish \textbf{GlowTact} as a practical new sensing technology for compact humanoid fingertips, combining a durable nitrile membrane and simple optical design with sensitive and information-rich tactile perception.

0.29

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.62
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19