CS Paper Radar

LuxTac: A Flexible, Scalable, and Open-Source Optical Taxel Array with Distributed Three-Axis Force Sensing for Tactile Robot Learning

Md Rakibul Islam Prince, John Pelan, Zhiyuan Zhang, Adyaa Khera, Katherine Pesetski, Adeesh Desai, Akimizu Sugiyama, Minwoo Ki, Benjamin Alan Capelle, Temitope Ibrahim Amosa, Zijie Xu, Yihan Huang, Taehun Chung, Long Wang, Wei Li, Shaoting Lin, Yu She

cs.RO ·submitted 2026-11-17 22:21 UTC · v1
code/data

Abstract

Low-cost tactile arrays have made touch a practical input for robot learning, but piezoresistive designs sense only pressure, while camera-based sensors that also resolve shear are too bulky to tile over a gripper. To solve this problem, we present LuxTac, a flexible, scalable optical taxel array, about 3.5 mm thick and built from off-the-shelf parts. Each taxel is a digital RGBC light-to-digital converter under a translucent white silicone layer capped by an opaque black film, so the back-scattered LED light falls monotonically with local indentation depth. The same board accepts two interchangeable gel cartridges: a plain one for normal sensing, and one with colored walls that encodes the local shear in the color of the returned light, with no camera, magnets, or bump overlay, making LuxTac, to our knowledge, the first optical taxel array to resolve shear at individual taxels. Characterized with an automated CNC indenter and a six-axis force/torque sensor, the normal cartridge responds linearly to force ($R^2$ = 0.999) from 104 mN to at least 5.8 N, with 2.0% repeatability, 5.9% hysteresis, and a taxel-to-taxel variation of 6-10% after normalization. With the shear cartridge, per-taxel models estimate the three-axis force at every taxel; across three indenter shapes and nine held-out sessions, the summed estimates reach $R^2$ = 0.96/0.96/0.92 in x/y/z, each taxel's estimate 0.92/0.93/0.94, and the median shear-direction error is 4.8 degrees. Adding LuxTac pressure readings to an Action Chunking Transformer policy substantially improves peg-in-hole success over a vision-only baseline. Design files, code, and videos are available at https://luxtac.github.io.

Comment
11 pages, 9 figures, 5 tables. Project page: https://luxtac.github.io

Closest papers

Nearest neighbours by meaning across the whole index.

SpectraTac: A Compact Camera-Free Optical Tactile Sensor with Distributed Color Sensing

cs.RO ·2026-08-31 ·Hao Wu, Haotian Guo, Yu Feng, Yutong Wang, Yanzhe Wang +1 more
similarity 0.73
Abstract

Tactile sensing is essential for physical interaction in robotics and human--machine systems. However, combining rich tactile information with compact hardware, low cost, and low computational overhead remains challenging. This work presents SpectraTac, a compact, camera-free optical tactile sensor that combines active red--green--blue (RGB) illumination with spatially distributed color sensing. Contact deforms a compliant transparent elastomer and modulates its internal light field, producing spatially differentiated changes in color and intensity. Three distributed color sensors capture these responses as low-dimensional spatio-spectral features, avoiding cameras, imaging optics, and high-dimensional image processing. The device measures 19.2 mm in diameter and 4 mm in height, with a material cost below USD~5. A data-driven decoding framework simultaneously estimates three-dimensional (3D) force and the contact region from the optical measurements. For 3D force prediction, the sensor achieved mean absolute errors (MAEs) of 0.161, 0.164, and 0.429 N along the x-, y-, and z-axes, respectively. The nine-region contact-classification accuracy was 99.9%. We further evaluated real-time 3D force tracking and contact-region-based human--machine interaction through an interactive control task. These results indicate that distributed color-resolved optical sensing offers a compact, low-cost alternative to camera-based tactile sensing for robotics, wearable sensing, and interactive systems.

0.35

LumiTac: Compact, High-Rate Six-Axis Optical Tactile Sensing for Human-Robot Interaction

cs.RO ·2026-11-04 ·Hao Wu, Haotian Guo, Yu Feng, Yutong Wang, Jianshu Zhou
similarity 0.71
Abstract

Integrating six-axis tactile feedback into robotic interfaces requires compact sensors with accurate load measurement and rapid online reconstruction. This paper presents LumiTac, a low-profile, camera-free optoelectronic tactile sensor combining spatially distributed illumination with spectral encoding. Five photoemitters and five RGBW photoreceivers are mounted on opposing circuit boards coupled through translucent silicone. Load-induced interlayer motion modulates the internal light field under compression, shear, bending, and torsion. The sensing head measures 12 mm in diameter and 4.75 mm in thickness, weighs less than 2 g, and has a component cost of approximately USD 7. A compact multilayer perceptron reconstructs three force and three moment components from 20 optical channels. Independent testing yielded coefficients of determination (R-squared) of 0.9657-0.9941, with mean absolute errors of 0.054-0.190 N for forces and 0.304-1.419 mN m for moments. Online prediction achieved an average update rate of 303.57 Hz and a median software processing latency of 0.722 ms. Experiments involving combined loading, light weights, and rapid tapping evaluated load tracking, sensitivity to small forces, and transient response, respectively. Robotic demonstrations further validated its applicability to tactile-guided manipulation and physical human-robot interaction. This study paves the way for compact, high-rate optical tactile sensing in robotic manipulation and human-robot interaction.

0.45

PCTac: Mechanochromic Photonic-Crystal Tactile Sensor for Dexterous Manipulation

cs.RO ·2026-11-09 ·Ruilin Zhang, Xuanshuo Liu, Junzhe Dai, Kefei Wu, Xuhao Qin +4 more
code/data similarity 0.67
Abstract · 9 pages, 7 figures

Modern visuotactile sensors primarily sense contact by imaging the deformation of a compliant interface. Using techniques such as photometric stereo, they can recover detailed contact geometry, often represented as surface normals or depth. However, force-related information typically still needs to be inferred indirectly through calibration, geometric reconstruction, or learned mappings. Mechanochromic photonic-crystal (PC) materials offer an alternative physical encoding mechanism: contact loading changes their periodic microstructure and spectral response, directly transforming local stress into a spatially resolved structural-color field. Despite this potential, PC materials have rarely been explored as visuotactile sensors for closed-loop robot learning. We present PCTac, an open-source mechanochromic PC fingertip that uses a dense hue field as its tactile observation. Loading characterization demonstrates a repeatable relationship between the applied normal load and the observed hue response. We further integrate this representation directly into a Diffusion Policy and evaluate it on three real-robot manipulation tasks. Across 90 physical rollouts, PCTac Hue achieves 68 successes (75.6\%), compared with 60 (66.7\%) for PCTac RGB, 57 (63.3\%) for Wedge RGB, and 29 (32.2\%) for vision-only. PCTac Hue also achieves the highest observed success rate on each evaluated task, including Perturbed Test-Tube Insertion, where it achieves 16/30 successes versus 13/30 for tactile RGB baselines and 1/30 for vision-only. These results demonstrate the potential of mechanochromic structural color as a compact, load-sensitive tactile representation for robot learning and closed-loop manipulation. Project page: https://bey0ndt1me.github.io/PCTac-page/.

0.21

VecTile: A Low-Cost Flexible Tactile Array for 3-DoF Force Sensing

cs.RO ·2026-10-22 ·Jian Hou, Xin Zhou, Adam J. Spiers
similarity 0.67
Abstract · 8 pages, 8 figures. Submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Tactile sensing provides robots with contact information difficult to obtain from vision alone. Shear force is particularly important for understanding tangential contact, guiding corrective motions, and maintaining grasp stability, yet flexible and low-cost tactile arrays often measure only normal force. We introduce VecTile, a low-cost, 6 mm thin, flexible tactile array capable of three-axis force sensing. VecTile combines a piezoresistive layer with passive silicone nubs that convert normal and shear forces into distinguishable pressure patterns. The sensor can be fabricated in-house without specialized equipment. The complete system costs less than 35 USD for a 4x4 array. We validate the sensing mechanism through finite element analysis and hardware experiments. In controlled single-taxel tests over 1-5 N normal force and up to 1.5 N shear force, VecTile achieves root-mean-square errors of 0.39 N and 0.16 N for normal and shear forces. A VecTile calibrated while flat retains accuracy when curved, while a five-minute manual calibration is sufficient for practical use. Two applications demonstrate its utility. First, shear readings are sensitive enough to stop a sharp scalpel from puncturing a balloon after contact. Second, the sensor substantially improves Diffusion Policy-guided power-plug insertion. All designs and code will be released upon paper acceptance. Project website: https://jiannnh.github.io/VecTile/.

0.20

OpenTac: An Open Ecosystem for Customizable, Scalable, and Transferable 3D Tactile Sensing

cs.RO eess.SPeess.SY ·2026-10-22 ·Ariel Slepyan, Geeta Chandra Raju Bethala, Jiafeng Gu, Anagha Rajendra Dangle, Yinzhe Zhou +10 more
code/data similarity 0.60
Abstract · 15 pages, 15 figures. Project website, open-source hardware and software, and demonstration videos: https://opentac.github.io

We present OpenTac, a novel sensor and a full-stack ecosystem for tactile skins that are highly customizable, scalable, and readily deployed in downstream robot control and learning applications. Our core contribution is twofold. First, we develop a scalable resistive tactile skin with a structured deformable overlay that converts tangential loading into spatially varying pressure. Differential responses across neighboring "taxels" support decoding of local shear vectors, and the common-mode response encodes normal force. Second, we provide a highly customizable sensor design tool that is able to automatically generate fabrication files for these tactile skins from 2D outlines and developable 3D surfaces, including from abstract descriptions such as text. We develop an ecosystem around the OpenTac sensor, including the CAD design tool, a sensor simulator, cross-sensor transfer, and fast/adaptive data acquisition. We demonstrate the broad applicability of the OpenTac-CAD sensor design tool by designing and fabricating more than 30 sensors across a variety of robot embodiments. We characterize the three-dimensional tactile fields produced by OpenTac with a commercial, high-precision force/torque sensor. We demonstrate the broad applicability of 3D tactile sensing across contact-rich feedback control and manipulation policy learning on four real-world robot embodiments. Additionally, adaptive acquisition enables kilohertz-rate partial readouts, and our readout circuitry enables high dynamic range (HDR) acquisition, measuring, for example, a 3.7 kg weight stack and a 20 g weight on the same sensor in the same frame. We provide all hardware, software, and result videos at opentac.github.io

0.21

TacGooseBumps (TacGB): Retrofitting Normal-Only Tactile Sensors with Shear Encoding for Learning Contact-Rich Manipulation

cs.RO ·2026-09-27 ·Wenjie Li, Binyu Yang, Yuxin Chen, Ambrose Wang, Masayoshi Tomizuka
hot direction similarity 0.59
Abstract · 9 pages, 8 figures. Wenjie Li and Binyu Yang contributed equally. v2: added project website, updated references, and improved HTML rendering…

Contact-rich policies often fail because distinct physical states look alike yet require different actions. Cameras may not reveal whether a connector is aligned or fully seated, while many normal-only tactile sensors can miss the tangential interactions perpendicular to the grasping direction that distinguish these states. We ask whether a learning policy needs calibrated shear measurements, or only a repeatable observation that separates shear-dependent contact states. We introduce TacGooseBumps (TacGB), a passive domed film that mechanically encodes tangential loading as pattern changes in an existing sensor's pressure map. Tangential loading tilts each dome and redistributes pressure across its footprint; an end-to-end policy consumes the resulting maps without added electronics, force reconstruction, or taxel-level dome alignment. Across four imitation-learning tasks and two data-collection pipelines, TacGB improves goal attainment, efficiency, and contact quality: insertion success increases by up to 36 percentage points, and successful insertions are completed faster, while fragile-object placement becomes gentler and drawing becomes more continuous and straight. Signal, stage-wise, failure-mode, and trajectory analyses link these gains to contact regimes in which task-relevant tangential interactions are poorly resolved by vision and normal pressure alone. Together, these results show that shear need not be measured metrically to benefit robot learning; it can instead be mechanically encoded without changing the underlying tactile sensor or the policy's pressure-map input format.

0.36

Non-Imaging Optical Tactile Sensors for Robotics: Transduction Principles, System Integration, and Robotic Applications

cs.RO ·2026-11-16 ·Hao Wu, Yu Feng, Haotian Guo, Huichan Zhao, Changsheng Wu +1 more
similarity 0.58
Abstract · 35 pages, 9 figures

Non-imaging optical tactile sensors encode contact through changes in optical intensity, wavelength, spectra, or photon counts, offering diverse architectures for robotic touch. Their usefulness depends on whether contact variables can be reliably distinguished from coupled mechanical and environmental effects, and whether the resulting information can be delivered in time to guide action. This review develops a unified framework linking mechanical load transmission, optical encoding, readout, and tactile inference to robotic task requirements. It examines reflective and waveguide-based devices, micro/nanofibers, fiber gratings, interferometric and resonant structures, and mechanoluminescent composites. Three considerations emerge across these approaches. First, high optical sensitivity supports accurate tactile estimation only when target variables remain identifiable under the relevant contact and calibration conditions. Second, spatial coverage and feedback timing must be assessed at the system level, accounting for multiplexing, acquisition, demodulation, and inference. Third, device characterization, offline recognition, and closed-loop robotic performance provide distinct levels of evidence and require different evaluation criteria. Representative studies illustrate how these considerations shape force estimation, contact localization, slip correction and distributed interaction. This review concludes with priorities for calibration transfer, reliable interfaces, scalable readout, and task-based validation, providing a basis for selecting and developing non-imaging optical tactile architectures for robotics.

0.16

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.57
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19