CS Paper Radar

Ambiguity Elimination via Successive Estimation in ISAC Systems with Reference Signals

Ali Al Khansa, Sami Mekki, Giyyarpuram Madhusudan

eess.SP ·submitted 2026-11-04 09:35 UTC · v1
published

Abstract

Integrated sensing and communication (ISAC) systems can efficiently reuse 5G New Radio (NR) reference signals to enable joint communication and passive target detection. Among these, the Positioning Reference Signal (PRS) is widely adopted for high-performance sensing activities. However, the PRS configuration, given by the comb structure, introduces periodic ambiguities, resulting in ghost targets. Existing approaches mitigate this issue by combining PRS with additional reference signals, such as the DeModulation Reference Signal (DMRS), effectively removing ghosts but at the cost of higher complexity and sensing overhead. This paper proposes a low-complexity successive estimation strategy that initially allows ghost targets but progressively eliminates them using historical ambiguity-free estimations. The method comprises a matching process to associate current detections with historical real targets, and a pattern deviation detection mechanism to trigger a fallback to ambiguity-free estimation when the target set changes. We derive a sufficient condition that guarantees the correct matching as a function of target velocity, PRS comb size, subcarrier spacing, and sensing refresh rate. Using this condition, a parameter selection strategy is proposed to jointly improve sensing and communication performance. Numerical results demonstrate that our method achieves unambiguous detection while significantly reducing sensing resources, thus releasing more resources for communication compared to State-of-the-Art (SotA) approaches.

Closest papers

Nearest neighbours by meaning across the whole index.

Ghost Target Elimination in 5G Reference Signals ISAC via Multi-static Multilateration

eess.SP ·2026-11-04 ·Ali Al Khansa, Sami Mekki
benchmark similarity 0.87
Abstract

Integrated Sensing and Communication (ISAC) systems can reuse 5G New Radio (NR) reference signals to enable joint communication and environmental sensing. Among these signals, the Positioning Reference Signal (PRS) is particularly suitable for range and Doppler estimation. However, its comb structure introduces periodic ambiguities that generate ghost targets. Existing solutions resolve these ambiguities by combining PRS with additional signals such as the DeModulation Reference Signal (DMRS), which increases sensing overhead. This paper proposes a PRS-only sensing framework that resolves ambiguities using multi-static observations. Instead of removing ghosts locally at each receiver, the proposed method exploits spatial diversity and performs ambiguity resolution at a fusion anchor. The anchor jointly estimates target locations and ambiguity indices via multilateration across multiple sensing nodes. This approach eliminates the need for additional reference signals while maintaining low receiver complexity. Simulation results show that the proposed method reliably resolves ghost targets and achieves superior detection performance compared to benchmark methods across various scenarios, while significantly enhancing resource efficiency by enabling sensing using PRS-only transmissions.

0.34

Reliable Bistatic Ranging With Unreliable Communication Payloads

eess.SP ·2026-11-05 ·Fangping Yu, Fan Liu, Yifeng Xiong, Jie Yang, Lei Xie +1 more
similarity 0.62
Abstract · 13 pages, 7 figures, submitted to IEEE for possible publication

This paper addresses a key challenge in bistatic integrated sensing and communications (ISAC): \textit{How to achieve reliable ranging using communication data signals that cannot be reliably recovered?} In modern communication systems, data payloads typically occupy far more time-frequency resources than pilots, offering substantially more observations to improve sensing accuracy. Exploiting them requires recovering the transmitted symbols to form sensing references. However, propagation and reflection losses can severely weaken target echoes. The sensing receiver may therefore be unable to recover data transmitted at a high rate selected for communication users. We first show that, at low signal-to-noise ratios (SNRs), using hard symbol decisions as sensing references can introduce a persistent bias in the estimated channel impulse response (CIR). This bias produces an error floor and spurious peaks in the power delay profile (PDP) that persist even after coherent accumulation over a large number of observations. To address this limitation, we develop a pilot-initialized expectation-maximization (EM) estimator that iteratively refines the CIR using posterior symbol moments. Under local regularity conditions and successful initialization, we establish that the EM method converges to the local maximum-likelihood (ML) solution for a sufficiently large number of OFDM data symbols. The converged estimator is asymptotically unbiased, where the CIR estimation mean-square error (MSE) at each delay bin decays as $O(1/M)$ by accumulating $M$ data symbols. Thus, estimation error can vanish through sufficient accumulation even while symbol recovery remains highly unreliable. Numerical results validate the proposed method, demonstrating substantially higher target detection probabilities than pilot-only and hard-decision-based bistatic ranging under the same low-SNR conditions.

0.37

OFDM-ISAC over Data Payloads: MSE Analysis, Constellation Design, and Experimentation

eess.SP ·2026-08-16 ·Kawon Han, Kaitao Meng, Alexandra Chatzicharistou, Christos Masouros
similarity 0.59
Abstract · 13 pages, 12 figures

Orthogonal frequency division multiplexing (OFDM) is a key waveform for integrated sensing and communication (ISAC) systems due to its high spectral efficiency and inherent compatibility with modern wireless standards. However, its fundamental estimation-theoretic sensing performance under random data modulation remains largely unexplored. This paper presents a unified and explicit performance analysis of OFDM-based ISAC systems for multi-target range estimation, focusing on the distinct impacts of the modulation constellation on the sensing performance. We develop a comprehensive estimation-theoretic framework to characterize the range estimation mean-square error (MSE) for both matched filtering (MF) and reciprocal filtering (RF) sensing receiver architectures. Our theoretical analysis reveals that in multi-target and clutter-rich environments, the sensing performance of the MF receiver is fundamentally limited by the fourth-order moment (kurtosis) of the constellation, which determines the data-dependent sidelobe interference level. In contrast, the RF receiver eliminates such interference at the cost of noise enhancement, with its performance governed by the inverse second-order moment of the constellation. Building on these closed-form MSE derivations, we propose a sensing-receiver specific geometric constellation shaping (GCS) framework. By jointly optimizing the constellation geometry based on the minimum Euclidean distance (MED) and receiver-dependent sensing metrics, we enable a flexible trade-off between communication reliability and sensing precision. Our results demonstrate that the proposed constellation shaping provides significant performance gains and facilitates a tailored sensing and communication trade-off across different receiver architectures in practical over-the-air implementations.

0.46

Fourth-Order Co-Channel Interference-Aware OFDM-ISAC Sensing in Cluttered Environments

eess.SP ·2026-09-12 ·Tri Nhu Do, Yosefine Triwidyastuti, Gunes Karabulut Kurt
similarity 0.59
Abstract

In this paper, we develop a sensing-centric receiver for monostatic orthogonal frequency-division multiplexing integrated sensing and communication (OFDM-ISAC) in the simultaneous presence of passive clutter and a non-cooperative co-channel OFDM transmitter. We show that removing the known ISAC symbols maps target and clutter echoes to deterministic delay-Doppler components, while the non-cooperative waveform remains a random, non-Gaussian, generically full-rank residual. Guided by this distinction, we combine moving-target indication for zero-Doppler clutter with a centered diagonal fourth-order statistic for interference identification. To obtain an unbiased fourth-order estimate from phase-aligned proper snapshots, we derive additive and multiplicative finite-sample bias corrections and pair the corrected statistic with a second-order moment to separate interference from Gaussian noise. Fourth order provides identification and presence testing, whereas second order provides the diagonal disturbance-power proxy used for weighting. We further introduce diagonally loaded weights that enforce a range-Doppler aperture-efficiency floor. Simulations show that the interference estimate approaches its theoretical profile as coherent support grows and remains insensitive to deterministic echoes, that the presence test resolves interference well below the level at which weighting matters, and that loaded processing improves target detection while controlling point-spread-function degradation.

0.08

Full-Frame OFDM-ISAC: Joint Constellation, Pilot, and Receive-Filter Design

eess.SP ·2026-09-19 ·Dongil Yang, Kaitao Meng, Fan Liu, Christos Masouros, Kawon Han
similarity 0.58
Abstract · 13 pages, 9 figures

Orthogonal frequency-division multiplexing (OFDM) integrated sensing and communication (ISAC) reuses the entire time-frequency frame, including pilots and data payloads, for radar sensing. The random data payload, however, reduces the sensing dynamic range and degrades the target detection and parameter estimation performance. Existing studies typically optimize the modulation constellation, the pilot pattern, the power allocation, and the receive filter in isolation, overlooking their coupled effects on the sensing ambiguity structure. To address this gap, we propose a joint design of the constellation, the pilot placement and power split, and the mismatched receive filter for full-frame OFDM-ISAC systems, which minimizes the residual interference inside declared regions of interest (ROIs) under a communication rate constraint. For a given transmit signaling scheme, the receive filter admits a closed-form solution. With this filter in place, we derive closed-form expressions for the receiver-specific interference floor and noise enhancement over the 2-D range-Doppler domain, which show that the floor is governed by a single effective statistic of the full-frame signaling. This law reduces the joint design to two steps. A balanced staggered pilot placement removes the deterministic grating lobes of pilot-power boosting, and the shaped constellation and the power split are then selected jointly on the boundary of the rate constraint under the channel estimation error, which attains the joint optimum over the constructed shaping levels to first order in the declared ROI size. Under a quality-of-service (QoS) constraint of $98\%$ of the rate of a conventional 16-QAM frame, the proposed design significantly lowers the interference floor, improves the target detection probability, and achieves better ranging accuracy compared to the conventional receive filter-aware design.

0.17

6G ISAC Drone Detection: Signal Processing and Experimental Validation at FR1

eess.SP ·2026-11-03 ·Enrique T. R. Pinto, Marcus Henninger, Lucas Giroto, Markku Juntti, Silvio Mandelli
similarity 0.58
Abstract

Integrated sensing and communications (ISAC) enables mobile networks to detect passive targets such as drones at minimal additional cost. However, in ISAC, a small drone must be detected against strong ground clutter with the limited radio resources left by communications. In this paper, we propose two ISAC target detectors: a coherent detector, which combines all frames and beam dwells of a revisit, and a non-coherent detector, robust to inter-frame clock phase drift. The algorithms leverage per-dwell clutter whitening and the adaptive coherence estimator (ACE) detection statistic to improve performance. Both detectors estimate the range, radial velocity, and azimuth of targets in real time on a laptop graphics processing unit (GPU). Measurements with an FR1 ISAC proof-of-concept system based on a commercial base station show that the coherent detector outperforms the non-coherent one and recovers the full track.

0.32

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.58
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

eess.SP ·2026-10-12 ·Zhenkun Zhang, Cunhua Pan, Hong Ren, Jun Tang, Dongming Wang +1 more
theory similarity 0.57
Abstract

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

0.12