CS Paper Radar

A Novel BVH-accelerated Dynamic Ray-Tracing Channel Model for Vehicular Communication Systems

Songjiang Yang, Cheng-Xiang Wang, Yinghua Wang, Chen Wang, Jie Huang, Yunfei Chen

eess.SP ·submitted 2026-11-05 01:57 UTC · v1
published

Abstract

Accurate and efficient channel modeling is critical for evaluating the sixth-generation (6G) networks, while dynamic ray-tracing (DRT) remains bottlenecked by its reliance on channel coherence time. To address this limitation, this paper proposes a novel bounding volume hierarchy-accelerated DRT (BVH-DRT), which introduces a mechanism shift from a time-driven update in DRT to a spatial-driven update. The proposed channel model clusters complex scatterers using the BVH method as pre-processing to establish a geometric coherence distance guided by transceiver kinematics, so that the ray update intervals in BVH-DRT can be autonomously adjusted to reduce the complexity. Furthermore, the non-stationary channel impulse responses are generated to evaluate delay-Doppler (DD) domain waveforms, including orthogonal time frequency space (OTFS) and orthogonal delay-Doppler division multiplexing (ODDM). Validations in vehicle-to-vehicle (V2V) scenarios demonstrate that BVH-DRT achieves spatial-temporal consistency with measurements and commercial software while significantly enhancing computational efficiency. Additionally, bit error rate (BER) evaluation highlights the severe impact of high-dynamic channels on waveform performance. The proposed framework is important for designing reliable communications and robust sensing in 6G networks.

Closest papers

Nearest neighbours by meaning across the whole index.

Modeling Diffuse Scattering in Mobility Scenarios: Ray Tracing Model and Measurement Validation

eess.SP ·2026-10-14 ·Milica Djordjevic, Thomas Wilding, Anja Dakić, Benjamin Rainer, Markus Hofer +1 more
code/data similarity 0.63
Abstract · Submitted to EuCAP 2027

Open-source ray tracing (RT) frameworks are increasingly used for site-specific channel modeling due to their reproducibility and extensibility. In non-stationary mobility scenarios, repeated RT evaluations can generate different diffuse propagation paths without preserving their correspondence, limiting a consistent representation of their temporal evolution. To address this limitation, we extend diffuse scattering modeling in Sionna RT using persistent surface-associated scattering points. Their positions remain fixed, while their contributions evolve according to changes in the propagation geometry and visibility. The proposed approach is validated using empirical radio channel impulse response measurements in an urban vehicular scenario at 5.9 GHz. Compared with the standard Sionna RT baseline, the proposed model shows improved agreement with measurements in the delay and Doppler domains.

0.28

An Open-Source Hybrid Ray-Tracing and 3GPP Channel Simulator for Non-Terrestrial Network

eess.SY ·2026-10-27 ·Yu-Chien Lin, Cheng-Yi Chang, Yen-Cheng Lai, Ming-Chun Lee, Ta-Sung Lee
code/data similarity 0.58
Abstract

This paper proposes a hybrid channel simulation framework that combines site-specific ray tracing (RT) with 3GPP-compliant statistical channel simulation for non-terrestrial networks (NTNs). The proposed approach uses RT to generate dominant propagation paths and augments them with statistically generated paths and subpaths to provide richer multipath realizations under practical simulation complexity. To provide a complete simulation framework, we integrate Sionna RT, 3GPP, and hybrid RT-3GPP simulators within a unified workflow. Simulation results based on key channel statistics and power delay profiles show that the proposed method preserves site-specific propagation characteristics while providing sufficiently rich multipath components, thereby addressing the complementary limitations of conventional RT-based and purely statistical NTN channel simulators. The developed simulator is also released as an open-source project to support reproducibility and further NTN research.

0.33

Joint Delay--Doppler Modeling of Multipath LEO Channels

eess.SP ·2026-11-02 ·Kuan-Po Chiu, Sumit Roy
hot direction similarity 0.58
Abstract

Multipath channel models for Low-Earth-orbit (LEO) non-terrestrial network (NTN) must contend with time variability due to rapid satellite orbital motion that in turn impacts local (near terrestrial) scattering near the ground terminal (GT) receiver. While 3GPP-defined NTN channel model pipelines TR 38.811, 38.901 incorporate elevation-dependence into statistical channel generators, these are inherited largely from 2-D terrestrial propagation and are largely insufficient. Further, they do not prescribe any integrated workflow that is broadly available for generating joint delay, Doppler/phase and component multipath power profiles as a function of satellite location over a pass. This work addresses this gap by developing a geometry-based stochastic channel model driven by prescribed slant range, elevation, and azimuth over a LEO pass. A ground scene generates wall-reflected, ground-reflected, and roof-edge-diffracted components, from which joint delay-Doppler statistics and temporal channel impulse response (CIR) evolution are obtained. The resulting locally wide-sense stationary tapped-delay-line CIR enables analysis of key statistics such as the $K$-factor of the taps, multipath delay and Doppler spreads as a function of elevation and scene parameters. Depending on the scenarios (urban and rural), our model-based results show that with omnidirectional antennas, the LoS probability, delay-spread and $K$-factor trends broadly match 3GPP NTN models in TR 38.811 as a function of elevation. Beamforming instead produces a mid-elevation $K$-factor peak, which is not predicted by TR 38.811 and 6G NTN. Doppler spreads are smaller than those from our previous model and QuaDriGa because the proposed model accounts for path existence. Stationarity durations for CIR are reported and generally decrease with elevation, but with local increases at mid-elevation due to path geometry effects.

0.56

A Novel Dynamic Ray-Tracing Channel Model for 6G LEO Satellite-to-Ground Communication Systems

eess.SP ·2026-09-26 ·Songjiang Yang, Cheng-Xiang Wang, Yinghua Wang, Jie Huang, Yuyang Zhou +2 more
top venue similarity 0.56
Abstract

The sixth generation (6G) communication systems envision a space-air-ground integrated network, making accurate satellite-to-ground (S2G) channel modeling crucial for communication systems design. Currently, the majority of S2G channel models rely on stochastic methods, which cannot provide multipath information based on realistic satellite orbits and environments. In this paper, we propose a novel low Earth orbit (LEO) S2G channel model based on dynamic ray-tracing to overcome the challenges of tracking rays for long-distance propagation by setting a virtual transmission plane (VTP). Moreover, since the line-of-sight propagation mechanism contributes the most power to satellite communications, the VTP is constructed based on the first Fresnel zone to generate parallel rays close to the ground. The realistic satellite orbit and environmental information are used in the proposed LEO S2G ray-tracing channel model to compute channel characteristics. The results show that the proposed LEO S2G ray-tracing channel model can accurately generate the channel characteristics based on the satellite orbits. The channel characteristics of LEO S2G communications computed by the proposed ray-tracing method can well match the channel measurements.

0.55

Ultra-High Resolution Method for Multipath Within a Co-Delay-Doppler Bin in DFT-P-OCDM

cs.IT ·2026-09-04 ·Mingxuan Han, Weile Zhang, Feifei Gao
similarity 0.55
Abstract

Communication systems can reuse their transmitted signals for sensing without dedicated radar transmissions. For an established DFT-preprocessed orthogonal chirp division multiplexing (DFT-P-OCDM) waveform, this task becomes difficult when several physical paths in a doubly selective channel fall into the same co-delay-Doppler bin. In this case, the number of resolvable delay classes inferred from the pilot may be smaller than the number of physical paths within the co-bin. This mismatch increases the difficulty of path number determination, fractional Doppler offset estimation, and channel reconstruction. We derive a pointwise relationship between the input and output in the DFT preprocessed Fresnel (DPF) domain for doubly selective channels with multiple paths within the co-delay-Doppler bin. Based on this input and output relation, we propose the two stage ultra high resolution (TSUR) framework. The first stage uses pilots of the phase progression to estimate delay, while the second stage uses the leakage samples to estimate the Doppler and the number of paths within each delay class. Furthermore, we derive CRLBs and analyze how the pilot configuration trades sensing resolution and communication recovery. Simulation results demonstrate that TSUR resolves same delay paths within a co-delay-Doppler bin, remains robust to exist delay offsets, and achieves lower fractional Doppler estimation errors than sequential extraction and off-grid baselines.

0.25

Sensing Fast and Distant Targets in Fractional Overspread Channels with Zak-OTFS and Modular Arithmetic

eess.SP cs.IT ·2026-10-29 ·Andrea Novero, Mudasir Ahmad Sheikh, Danish Nisar, Saif Khan Mohammed, Michele Zorzi +1 more
similarity 0.54
Abstract · 14 pages, 8 figures, 4 tables

Delay-Doppler (DD) modulations, such as Zak-transform-based orthogonal time frequency space (Zak-OTFS) modulation, represent the channel as a sparse set of delay and Doppler shifts, which makes them well suited for radar sensing. Sensing with a single DD frame, however, is unambiguous only when the channel spread factor, i.e., the product of the delay and Doppler spreads, is less then one. Long-range mobility scenarios, including drones, airplanes, low Earth orbit (LEO) satellites, and underwater acoustic links, typically violate this crystallization condition, so that a single frame aliases the target delays, Doppler shifts, or both. Existing methods add a time-frequency pilot to a conventional DD frame, resolve the aliasing in only one dimension, and assume integer delays and Doppler shifts. We propose a frame design that combines multiple DD bases with different delay and Doppler periods, which together cover an overspread channel with fractional delays and Doppler shifts, using the same bandwidth and frame size. We show that modular arithmetic on the peak positions uniquely recovers each target by pairing the peaks through their common projection and their gains, and we derive the condition under which this pairing is ambiguous. We implement the design with two superimposed Zak-OTFS frames and propose two receivers: dual-frame sensing (DS), which performs the joint detection directly, and DS with cross-pilot cancellation (DS-XC), which additionally cancels the cross-pilot interference, re-estimates the gains by joint least squares, and removes ghost targets. Both receivers maintain a detection rate close to one as the spread factor grows, and DS-XC also achieves the lowest false-alarm rate and channel estimation error among all the compared systems. In a 100 km drone scenario, DS-XC outperforms all baselines, with a complexity that grows near-linearly with the time-bandwidth product.

0.22

An HFM-Inspired Random Access Preamble Design for NTN under High Doppler

eess.SP ·2026-08-14 ·Mehwish Bibi, Saira Rafique, Ahmed Naeem, Huseyin Arslan
similarity 0.53
Abstract

Non-terrestrial networks (NTNs) are a key enabler of ubiquitous 6G connectivity, but the high orbital velocity and long propagation distances in low-Earth orbit (LEO) NTN operation introduce large Doppler shifts and substantial delay uncertainty that challenge New Radio (NR) physical random access channel (PRACH) design. Conventional Zadoff Chu (ZC) and linear frequency modulated (LFM) preambles are particularly vulnerable, as Doppler induced ambiguity and delay Doppler coupling degrade timing estimation and preamble identification. This paper proposes a hyperbolic frequency modulation (HFM) inspired PRACH preamble for robust synchronization and reliable identification under uncompensated or unknown Doppler, detected with a conventional matched filter receiver so that the gains reflect the preamble design. A unified delay Doppler ambiguity function framework characterizes the self and cross ambiguity behavior of ZC, LFM, and HFM inspired preambles, and a scaling-factor based codebook ensures multi-user separability. Simulation results under NTN channel conditions confirm higher detection probability, lower timing root mean square error (RMSE), and improved peak to sidelobe and integrated sidelobe levels compared with ZC and frequency-domain superposed LFM baselines.

0.04

Ray-Tracing-Based Dynamic Channel Sounding With Autoregressive Wi-Fi CSI Prediction

cs.IT cs.AIcs.NI ·2026-11-04 ·Lyutianyang Zhang, Yixin Ying, Liu Cao, Vanlin Sathya, Jinke Ren +1 more
similarity 0.53
Abstract

Channel sounding in Wi-Fi multiple-input multiple-output (MIMO) systems must balance channel state information (CSI) accuracy against CSI acquisition overhead. Device mobility causes channel aging, while autoregressive CSI prediction introduces errors that accumulate over sounding intervals. However, standardized statistical channel models cannot fully capture the environment-specific channel dynamics encountered in physical artificial intelligence (AI) applications, motivating the use of Sionna-based ray tracing to evaluate CSI prediction under device mobility and evolving propagation geometry. This paper develops a dynamic sounding framework that integrates autoregressive CSI prediction with signal-to-interference-plus-noise ratio (SINR)-constrained interval selection. A Transformer with rotary position embedding that converts device positions into CSI sequences predicts CSI across multiple subcarriers for beamforming updates between sounding exchanges. We formulate sounding-interval selection as a predicted average-throughput maximization problem under per-stream SINR lower-bound constraints, including CSI acquisition and processing overhead. A prediction-error perturbation analysis provides the SINR bounds, and cumulative-sum enumeration globally solves the finite single-variable problem. Actual SINR feasibility holds whenever the prediction errors satisfy the bounds. Ray-tracing experiments assess channel prediction, trajectory transfer, and autoregressive prediction errors. In single-STA Wi-Fi 7 link-level simulations, predicted-CSI beamforming improves mean goodput by 67.3%, 112.7%, and 119.1% over stale CSI for linear, circular, and cosine trajectories, respectively.

0.22