CS Paper Radar

Nonlinear Fault Tolerant Control of Wind Turbine Pitch Systems: A Comparative Study

Alessio Dallabona, Mogens Blanke, Dimitrios Papageorgiou

eess.SY ·submitted 2026-11-06 16:25 UTC · v1

Abstract

Electro-hydraulic pitch systems account for about one fifth of wind-turbine failures, motivating the development of resilient control strategies for fault mitigation. The study considers a large set of robust nonlinear control designs of different feedback principles and architectures, and assesses their fault-tolerant capabilities in comparison to each other and against the industrial standard, i.e. the Proportional-Integral (PI) controller. The implementation and tuning of each scheme is based on a high-fidelity simulator to ensure nominal performance, whereas each controller is deployed unchanged on an experimental apparatus that includes a full-scale electro-hydraulic pitch system. The comparative evaluation of the considered fault-tolerant solutions is carried out through several tests that cover nominal operation and twenty-five representative fault scenarios, including sensor, process, and actuator faults. The analysis highlights the trade-off between performance preservation under faults and increased actuator chattering. The experimental results show that introducing a dynamic input-reconstruction module into the design of the nonlinear controllers significantly reduces actuator chatter without compromising their fault-tolerant properties.

Closest papers

Nearest neighbours by meaning across the whole index.

Model Predictive Control of Wind Turbines: A Model-Oriented Review of Prediction Models, Control Objectives, and Nonlinear Aerodynamic Formulations

eess.SY math.DSmath.OC ·2026-10-22 ·Roya Khalili-Amirabadi, Mohsen Jalaeian-Farimani, Mahdi Ghane
published similarity 0.55
Abstract · Khalili-Amirabadi, R., Jalaeian-Farimani, M., & Ghane, M. (2026). Model Predictive Control of Wind Turbines: A Model-Oriented Review of Pred…

Model predictive control (MPC) has been applied to wind-turbine regulation with markedly different internal prediction models, ranging from linearized low-order turbine models to nonlinear, aeroelastic, floating, and data-driven predictors. This review organizes the literature primarily by the model propagated by the controller and treats model order, predictor representation, MPC formulation, control objective, and validation plant as separate descriptors. Primary studies show that low-order linear or piecewise-affine predictors are attractive for constrained power and speed regulation, whereas flexible drivetrain, structural, and floating models are needed when drivetrain twist, tower motion, blade loads, or platform dynamics are explicit control quantities. Nonlinear and economic MPC studies further demonstrate coordinated pitch/torque control across broad operating regions, while preview, repetitive, and data-driven formulations address wind prediction, periodic loads, and model mismatch. Particular attention is given to aerodynamic pitch dependence: variable-pitch turbine dynamics can be non-affine with respect to applied pitch, and the term NMPC alone does not prove that the original nonlinear pitch map is retained inside the optimizer. The review therefore adopts a conservative, equation-based classification for direct nonlinear applied-pitch propagation. Here, direct nonlinear applied-pitch propagation means that the applied pitch at each prediction step is evaluated inside the original nonlinear aerodynamic map, rather than replacing that dependence by a linearized, scheduled, piecewise-affine, or learned surrogate. The literature supports a remaining integration challenge at the intersection of flexible drivetrain prediction, nonlinear aerodynamic pitch treatment, explicit constraints and load objectives, and validated adaptive or learned model correction.

0.35

Adaptive PD-like Fault Tolerant Controller for a Class of Nonlinear Systems

eess.SY ·2026-11-06 ·Alessio Dallabona, Vicenç Puig, Mogens Blanke, Dimitrios Papageorgiou
similarity 0.51
Abstract

The article presents a nonlinear adaptive control strategy for a class of feedback-linearizable systems subject to process faults and disturbance. The controller is derived through Lyapunov analysis and incorporates an adaptive proportional gain within a PD-like structure, preserving simplicity while providing nonlinear adaptive behavior. A residual-based gating mechanism activates the adaptation only when the tracking error exceeds a prescribed threshold, preventing unnecessary gain updates during nominal operation and improving robustness to noise. The proposed design yields uniform global ultimate boundedness of the closed-loop signals, with explicit expressions for the steady-state tracking bound. Practical tuning guidelines for the adaptive parameters and Lyapunov matrix selection are provided to ensure consistent gating behavior. Simulations on a precision positioning system illustrate effective compensation of process faults, rapid gain escalation during degraded conditions, and smooth reversion to nominal performance, demonstrating that the method enhances fault tolerance while retaining the structural simplicity of PD control.

0.28

Same World, Different Knowledge: When Isolated Audits Misjudge World-Model Repairs

cs.RO ·2026-09-17 ·Rui Min, Xianyao Li, Fang Xu, Sofiane Lachab, Jing Du
similarity 0.48
Abstract · 9 pages, 3 figures, 6 tables

A repair favored under an isolated input fault can be inferior when deployed modules share the faulty information. We introduce an information-interface audit for world models, distinguishing fidelity gaps, where exact inputs become estimates, from availability gaps, where inputs are missing. Fixed-weight interventions measure prediction error, input dependence, and paired closed-loop benefit, including dependencies introduced by reconstruction. In simulated quadrotor model predictive control, coupled, opposite-sign 10% mass/thrust calibration errors reduce a physics-anchored model's success from 69% to 8%; uncertainty training restores 65%. Wind reconstruction recovers control benefit but inherits calibration dependence. For a positive calibration offset, reconstruction-only corruption favors uncertainty-trained reconstruction, whereas shared corruption favors the baseline. Acceleration diagnostics reveal compensation between reconstruction bias and nominal-model error, also observed with a disturbance observer. Repair selection therefore depends on the information paths used in deployment.

0.23

Learning-Oriented Fault-Tolerant Control for UAVs with Time-Varying Fault Estimation

eess.SY ·2026-10-22 ·Moh Kamalul Wafi
published similarity 0.48
Abstract · This is an extended version of the paper published in the proceedings of IEEE CoDIT

The increasing deployment of unmanned aerial vehicles (UAVs) in safety-critical applications has created a growing demand for control strategies that remain reliable in the presence of actuator and sensor faults. This paper presents a fault-tolerant control framework that combines constructive mathematical modeling, proportional--integral (PI) fault estimation, and learning-oriented control. A nonlinear quadcopter model is first developed using both the Newton--Euler and Euler--Lagrange formulations, from which a discrete-time linear model is derived for observer and controller design. A PI observer is then proposed to estimate actuator and sensor faults, with exponential estimation-error convergence established for constant faults in the absence of disturbances and ultimate boundedness established for slowly time-varying faults under bounded disturbances. The estimated fault signals are incorporated into an active fault-tolerant control architecture together with a Deep Deterministic Policy Gradient (DDPG) controller, which is trained using only the yaw channel and subsequently applied to improve closed-loop tracking performance. Numerical simulations illustrate the observer's estimation performance under constant and slowly time-varying faults, including bounded disturbances, and the tracking performance of the integrated controller under multiple actuator and sensor fault scenarios. The proposed framework combines model-based fault estimation with learning-based control to improve fault accommodation and tracking performance in UAV systems.

0.49

Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure

eess.SY ·2026-11-11 ·Mohamed Al Lawati, Adeel Akhtar
code/data similarity 0.47
Abstract · 8 pages, 8 figures

This paper presents a nonlinear control law for a slung payload system (SPS) consisting of a quadrotor unmanned aerial vehicle (UAV) carrying a slung payload. We propose a fault-tolerant control (FTC) design for the case of a complete single-rotor failure, i.e., only three functioning propellers. The failure is not modeled as a disturbance to be handled by estimation. Rather, we model the faulty SPS in control-affine form and design a quasi-static feedback law directly for the faulty dynamics. The controller achieves local exponential convergence of the payload position to a geometric path in space, rather than tracking a timed reference trajectory. Moreover, the transverse dynamics are exponentially stable, and the path-following manifold is rendered controlled invariant by feedback. Controlled invariance allows motion along the path to be prescribed independently through a tangential command while the state stays on the path-following manifold. The UAV body angular velocity remains bounded under bounded applied torque despite the failure. To validate the control design, numerical simulations apply the controller derived from the faulty SPS model in coordinates to the coordinate-free SPS model. Code and animations are available at https://gradslab.github.io/qs-sl/.

0.17

Enhancing Grid Stability with Synchronverter-Based Control for Grid-Side Converters in Wind Power Systems

eess.SY ·2026-11-02 ·Alan Valadez, George Weiss, Chunjiang Jia, Chong Ng
published similarity 0.47
Abstract

This paper proposes a new synchronverter control strategy for wind turbine grid-side converters, aimed at bolstering grid resilience by providing essential inertial frequency support without the need for additional energy storage components. The strategy harnesses the inherent energy storage capability of the DC-link capacitor to emulate the dynamic behavior of a synchronous generator, effectively contributing to grid inertia. A dual-controller architecture is implemented, consisting of a slow PI controller to maintain DC voltage stability and a fast protection mechanism to prevent overvoltage and undervoltage excursions. Critically, the control scheme facilitates controlled reductions of up to 10% in the DC-link voltage, generating a power reserve that can be strategically deployed for inertia emulation while preserving safe operating limits. The efficacy of the proposed method is validated through simulations of a representative three-turbine wind power plant, incorporating coordinated operation via virtual friction for inter-machine damping and local-global control strategies. Results showcase the superior performance of the proposed strategy compared to conventional grid-following control, emphasizing its potential to significantly improve grid stability and address the increasing challenges posed by high renewable energy penetration.

0.62

Energy-Based Fault Detection and Isolation Framework for Flat Port-Hamiltonian Mechanical Systems

cs.RO eess.SY ·2026-10-24 ·Johnny Garcia, Nicolas Salguero, Naveed Iqbal, Brahim Brahmi, Ramy Rashad
unusual similarity 0.46
Abstract

Fault diagnosis during regulated motion requires informative signals even when feedback attenuates tracking deviations. This paper develops an energy-based diagnostic framework that constructs mechanical port-power residuals without a dedicated dynamic observer. Spectral Hamiltonian Algebraic Power Evaluation (SHAPE) combines port-Hamiltonian variables and differential flatness to generate nominal power references from planned motion for fully actuated mechanical systems with collocated actuation. Subtracting these references from commanded effort multiplied by measured flow yields residuals whose final evaluation requires neither recursive observer updates nor measured-state dynamics calculations. Continuous wavelet transform (CWT) scalograms and a shared-encoder convolutional neural network are used to distinguish nominal operation, actuator loss of effectiveness, anomalous friction, and vibration from complete trajectories. Evaluation uses a simulated six degree of freedom Kinova manipulator under model predictive control and fixed plant-model mismatch, with single faults at a specified joint. Across five training seeds and 3000 held-out test runs, SHAPE-CWT achieves a mean accuracy of 84.69 percent, versus 81.67 percent for torque residuals and 97.17 percent for the generalized momentum observer under common CWT processing. The respective sample standard deviations are 0.70, 0.70, and 0.37 percentage points. These results demonstrate useful fault-type discrimination from algebraic power residuals, while severity-excitation profiles and offline velocity perturbations reveal limits to their diagnostic capability.

0.24

Simulation Modeling and Control of an Elastic Shaping Antagonistic Variable Stiffness Actuator

eess.SY ·2026-11-05 ·Yuanlong Ji, Ruizhe Jiang, Dongrun Jin, Xiangyu Xie, Junheng Lin +1 more
similarity 0.46
Abstract · 29 pages, 11 figures. Extends the structural study in arXiv:2609.18456 (ACIRS 2026) with dynamic modeling and closed-loop control evaluation

Position--stiffness regulation of antagonistic variable stiffness actuators (VSAs) involves coupled nonlinear dynamics, parameter uncertainty, and feedback states that are not directly measured. This paper addresses this challenge through a simulation-based workflow that integrates elastic shaping, model verification, and layered nonlinear control. This study builds on a previously developed actuator comprising two crossed four-bar compliant transmission elastic units. Its optimized elastic mapping provides the structural basis, with an ADAMS torque-curve root mean square error (RMSE) of $2.57\,\mathrm{N\!\cdot\!mm}$ against the target. A control-oriented analytical model is implemented in Simulink and compared with the independently executed ADAMS model under matched inputs. The maximum joint-angle RMSE across the tested cases is $4.66\times10^{-3}\,\mathrm{rad}$. A layered controller combines extended Kalman filtering for state reconstruction, feedback linearization for nominal decoupling, and adaptive sliding-mode control for residual compensation. At the end of the nominal simulation, the joint-angle error is approximately $3.14\times10^{-5}\,\mathrm{rad}$. The stiffness error is $3.07\,\mathrm{N\!\cdot\!mm/rad}$ relative to a target of $50\,\mathrm{N\!\cdot\!mm/rad}$. Parameter-variation and ablation tests assess tracking performance and the effects of the controller modules within the evaluated conditions. The resulting workflow links structural-response modeling, state estimation, and robust control assessment, supporting repeatable comparisons beyond nominal tracking alone.

0.24