CS Paper Radar

3D Segmentation in the Clinic: A Grand Challenge

Bram van Ginneken, Tobias Heimann, Martin Styner

cs.CV ·submitted 2026-11-07 13:41 UTC · v1
publishedhighly cited

Abstract

This paper describes the set-up of a segmentation competition for automatic and semi-automatic extraction of the liver from computed tomography scans and the caudate nucleus from brain MRI data. This competition was held in the form of a workshop at the 2007 Medical Image Computing and Computer Assisted Intervention conference. The rationale for organizing the competition is discussed, the training and test data sets for both segmentation tasks are described and the scoring system used to evaluate the segmentation is presented.

Comment
9 pages, 1 table. Published in the proceedings of the MICCAI 2007 workshop 3D Segmentation in the Clinic: A Grand Challenge
Journal ref
In: T. Heimann, M. Styner, B. van Ginneken (Eds.), 3D Segmentation in The Clinic: A Grand Challenge, pp. 7-15, 2007

Closest papers

Nearest neighbours by meaning across the whole index.

CIRSeg: Coarse-to-Fine Intensity-Robust Liver Segmentation with Source-Free Continual Test-Time Adaptation

cs.CV ·2026-10-07 ·Ruoshi Xu, Mingqi Gao, Shengda Luo, Jingkun Chen
publishedcode/data similarity 0.63
Abstract · Accepted at the CARE 2026 Workshop at MICCAI 2026

Reliable liver segmentation in contrast-enhanced MRI is essential for quantitative hepatic assessment, treatment planning, and longitudinal disease monitoring. However, limited annotated data and scanner- or vendor-dependent intensity variations can cause overfitting and poor generalization to unseen acquisition domains. Moreover, simultaneously achieving robust global localization and precise boundary delineation remains challenging, while predictions may contain isolated false-positive regions outside the main liver component. To address these challenges, we propose CIRSeg, a coarse-to-fine, intensity-robust liver segmentation framework based on nnU-Netv2. CIRSeg combines 3D CutMix with stochastic intensity transfer using either Nyul augmentation or histogram matching to improve robustness to heterogeneous MRI intensities. Its cascaded architecture decouples low-resolution anatomical localization from full-resolution boundary refinement. At inference, source-free test-time adaptation based on confidence-filtered predictions and probability-prior regularization further improves robustness to out-of-distribution inputs. As a final deterministic post-processing step, largest connected component filtering removes isolated false-positive regions. On the CARE 2026 test set, CIRSeg achieves Dice scores of 97.13\% and 97.93\% on the in-domain and unseen-domain subsets, with corresponding HD95 values of 20.18 mm and 11.30 mm, respectively. These results demonstrate consistently accurate segmentation across both in-domain and unseen acquisition settings. The code is available at https://github.com/jingkunchen/MICCAI_CARE_2026

0.28

Unsupervised Anatomical Feature Learning via Diffusion Models: Enhanced Medical Image Segmentation with Denoising Diffusion Probabilistic Models

cs.CV cs.AIcs.LG ·2026-08-26 ·Akshat G, Divyansh Gupta, Shaleen Bhatnagar, Shilpa Ankalaki, Tusar Kanti Mishra
similarity 0.62
Abstract · 15 pages, 5 figures. Submitted for peer review

Acquiring pixel-level annotations for medical image segmentation is a severe bottleneck. Traditional U-Net architectures, while effective, learn local texture patterns and lack awareness of global anatomical structures, leading to boundary delineation failures in low-data regimes. This research paper proposes utilizing unsupervised Denoising Diffusion Probabilistic Models (DDPMs) to extract anatomical features. We train a DDPM on 21 unlabeled abdominal CT scans to learn structural representations, transferring the encoder weights to a downstream segmentation task evaluated on the BTCV multi-organ dataset. Diffusion pretraining significantly improved liver segmentation: Dice increased from $0.75\pm0.36$ to $0.93\pm0.16$ ($p < 5.33\times10^{-26}$, 0.529 Cohen's d), Average Surface Distance (ASD) decreased by 66%, and 95th-percentile Hausdorff Distance (HD95) reduced by 45%. For kidney segmentation, Dice improved from $0.90\pm0.19$ to $0.95\pm0.10$ ($p < 4.01\times10^{-11}$). Multi-organ pooled performance showed a 68% variance reduction and a 74% improvement in boundary precision (Dice $0.95\pm0.07$). Crucially, frozen encoder models retained > 80% of fine-tuned performance without exposure to segmentation labels, proving the existence of learned anatomical priors. In low-data scenarios, diffusion-pretrained models maintained robust performance with only 50% (Dice: 0.92 liver, 0.94 kidney), 25%, and even 10% (Dice: 0.89 liver, 0.71 kidney) of labeled data. Using unlabeled images for diffusion-based pretraining successfully embeds robust anatomical features prior to human supervision, transforming U-Nets into anatomy-aware systems.

0.21

VoxelSage: Tool-Augmented 3D CT Analysis and Simulator-Shielded Sequential Resection Planning for Liver Tumors

cs.CV eess.IV ·2026-09-29 ·Binghong Qian, Xuanhe Liu, Yifan Xing, Wenjie Deng, Jian Wu +1 more
code/data similarity 0.58
Abstract · 21 pages, 10 figures. Technical report. Code at https://github.com/ZJUMAI/VoxelSage

Preoperative liver-tumor assessment requires segmentation, physical-space measurement, visual evidence, and resection planning from the same three-dimensional CT volume. Existing tools often handle these steps separately, while language models cannot reliably compute physical measurements from CT. To provide an integrated workflow, we present VoxelSage, a multi-modal system for two- and three-dimensional visualization, liver-tumor analysis, and preoperative resection planning. Its dual-port architecture separates language-model orchestration from image computation: Port A interprets requests and selects skills, while Port B applies them to CT volumes and segmentation masks and returns structured results. Keeping physical measurements in Port B prevents the LLM from computing them directly and reduces the risk of fabricated numerical results. Eight built-in skills support quantitative analysis, visual evidence generation, three-dimensional reconstruction, segmentation refinement, and sequential resection planning; user-defined skills can extend these functions. For sequence planning, a behavior-cloned neural ranker orders candidate resection targets, while a simulator-based shield checks them against predefined constraints. Across 256 unseen simulator scenes, this approach reduced mean simulated time from 34.274 to 33.388 min (0.886 min, 2.59%) and mean simulated blood loss from 300.847 to 183.852 mL (116.995 mL, 38.89%) relative to a deterministic baseline. These results demonstrate system integration and simulator-level performance, not clinical efficacy or safety. The public implementation is available at https://github.com/ZJUMAI/VoxelSage.

0.29

Confidence-Aware Teacher-Student Distillation for 3D Medical Segmentation

cs.CV ·2026-09-20 ·Georgios Triantafyllou, Dimitris K. Iakovidis
theory similarity 0.58
Abstract

Medical image segmentation models typically rely on large amounts of densely annotated volumetric data, limiting their scalability across tasks and imaging modalities. This work addresses the challenge of predicting entire 3D anatomical structures from extreme annotation sparsity. An annotation-efficient student-teacher framework is proposed for automatic 3D medical segmentation that requires only a set of point prompts on a single 2D slice per volume, as input. A foundation model serves as an offline teacher, utilizing the provided point prompts from the selected slice to full-volume pseudo-annotations alongside their corresponding spatial confidence scores prior to student training. To mitigate the error propagation of noisy pseudo-annotations, a task-specific 3D student network is trained using a confidence-aware optimization strategy. By leveraging the teacher's pre-computed confidence scores, this strategy explicitly excludes statically uncertain regions of the pseudo-annotations from the loss calculation, while simultaneously emphasizing regions with higher confidence. Evaluated on 3D cardiac MRI datasets, our framework outperforms state-of-the-art semi-supervised methods, improving segmentation performance by up to 43.6%. Furthermore, it drastically reduces the manual annotation burden to just a few positive point prompts per volume, while improving surface boundary precision by up to 14.7% over the teacher and successfully recovering up to 34.1% of the performance gap toward the fully supervised upper bound.

0.22

Parameter-Efficient 3D Segmentation of Liver and Liver tumors: Depthwise factorization Scales Better Than Dense Convolution with Spatial Dimensionality

cs.CV cs.LG ·2026-09-27 ·Adham M. Alkhadrawi, Mohammed A. B. Mahmoud
benchmark similarity 0.58
Abstract

Three-dimensional dense convolutional networks are the strongest performers on volumetric medical image segmentation, but their parameter counts scale poorly: moving a dense k x k convolution to k x k x k multiplies its weights by k. We observe that depthwise separable factorization does not share this penalty. Because the cubic kernel term applies only to the depthwise stage while the pointwise projection, which dominates the parameter count, is unchanged, the same architecture grows by 5 % from 2D to 3D where a dense convolutional U-Net grows by 200 %. We exploit this asymmetry to build a 3D U-Net with 536,990 parameters, 24x fewer than an identical dense 3D U-Net. On MSD Task03 Liver (the Medical Segmentation Decathlon liver task, derived from LiTS), evaluated per case under five-fold cross-validation over all 131 public volumes, the model reaches a tumor Dice of 0.577 (95% CI [0.518, 0.633]) and a liver Dice of 0.947 (95% CI [0.941, 0.952]). Its liver Dice exceeds previously reported performance. Its tumor Dice exceeds their low-resolution configuration (0.4701) by 0.107 and their 2D configuration (0.5394), at approximately one twenty-fourth of the parameters and roughly half the in-plane resolution. Trained under identical conditions on a common held-out split, it exceeds a dense 3D U-Net on liver by +0.031 Dice (paired p = 0.006) and on tumor by +0.041 (95 % CI [+0.005, +0.081], paired p = 0.056), suggesting the factorization also acts as a regularizer in the small-data regime characteristic of medical imaging. We further show, on both LiTS and a 2D endoscopy benchmark, that a large fraction of the network's learnable spatial filters can be replaced by fixed shifts at no cost in accuracy, but that replacing all of them is measurably worse, the placement of spatial capacity matters more than its total amount.

0.11

An Agentic AI Workflow for Liver Lesion Segmentation and Structured Radiology Reporting

cs.CV cs.LG ·2026-10-25 ·Fatma Ahmed Mansour, Rahatara Ferdousi, Zyad Medhat Mahmoud Ashor, Manar Fathy Elshenawy, Ibrahim Shehaby +2 more
similarity 0.57
Abstract

Despite advances in automated liver lesion segmentation, a gap remains between image-derived predictions and clinically interpretable radiology reports. Bridging this gap requires quantitative measurements that are both reproducible and traceable. We present an evidence-grounded agentic AI framework that connects liver and lesion segmentation with deterministic quantification and structured reporting. TotalSegmentator-based nnU-Net models delineate the liver, Couinaud segments, and lesions, while computational tools extract volumes, dimensions, counts, and anatomical locations. A large language model (LLM) organizes these measurements into a predefined reporting schema, with numerical consistency checks against source measurements. On 51 LiTS cases, the segmentation stage achieved a liver Dice score of 0.947, lesion sensitivity of 75.6%, and positive predictive value of 68.9%. Exploratory screening of 25,494 MERLIN reports identified 10,208 (40.0%) with liver-related abnormalities. By connecting quantitative imaging evidence with agentic report generation, this work takes a step toward human-centered medical AI that prioritizes traceability and clinical relevance.

0.23

ThreshGuide: Class-Aware Labeled-Guided Thresholding for Semi-Supervised 3D Abdominal Multi-Organ Segmentation

cs.CV ·2026-09-14 ·Hongyu Liu, Yinlong Wang, Lusha Li, Hui Meng
similarity 0.56
Abstract · 16 pages, 10 figures

Pseudo-labeling is a strong paradigm for semi-supervised medical image segmentation, yet its effectiveness is highly sensitive to confidence thresholding. In abdominal multi-organ segmentation, a fixed global threshold is particularly suboptimal because organ classes differ substantially in size, appearance, and learning difficulty. In this work, we propose ThreshGuide, a class-aware threshold adaptation framework that uses labeled data to guide pseudo-label selection on unlabeled data. Built upon a standard teacher-student architecture, the teacher model evaluates labeled samples during training to estimate class-aware threshold targets by maximizing an error-aware F\b{eta} criterion that balances precision and coverage. These targets are then smoothed with an exponential moving average (EMA) and used to filter unlabeled voxels in a class-dependent manner. Experiments on FLARE2022 and AMOS2022 show that ThreshGuide performs competitively overall, yielding clear improvements specifically on hard-to-learn organs.

0.19

BrainIAC: Interactive 3D Brain Lesion Segmentation across Heterogeneous MRI Modalities with Online Adaptation

cs.CV ·2026-09-19 ·Wentian Xu, Anthony P Addison, Ziyun Liang, Harry Anthony, Guang Yang +1 more
code/data similarity 0.56
Abstract

Brain lesion segmentation is a fundamental task in medical image analysis, playing a critical role in diagnosis, treatment planning, and longitudinal disease monitoring. Yet existing models still struggle to meet the demands of real clinical use, where deployments contain data distribution shifts, arising from differences in scanner hardware, imaging protocol (varying MRI modality sets), and new pathologies. We present BrainIAC (Brain lesion Interactive Adaptive Continuously learning segmentation), a unified framework that integrates (i) a multi-modal backbone network trained to segment multiple types of brain lesions and handle heterogeneous sets of modalities via zero-filling and random modality dropping; (ii) 3D interactive segmentation with bounding-box and click prompts that preserves fully automatic prediction when no prompt is given; and (iii) an online adaptation mechanism combining Mid-Interaction adaptation and Post-Interaction adaptation, supervised by the network's own predictions as pseudo labels and guided by an extra Click-Centered Gaussian loss. To our knowledge, this is one of the first 3D online adaptation methods for interactive segmentation, and the first to combine handling of heterogeneous modality sets with online adaptation. Experiments across seven brain MRI datasets demonstrate that the proposed components provide complementary and synergistic benefits. The method consistently outperforms existing approaches and generalizes well across heterogeneous imaging modalities, including those unseen during training, as well as previously unseen brain pathology types. The code and a 3D Slicer plug-in will be released at https://github.com/WenTXuL/BrainIAC upon publication.

0.33