CS Paper Radar

Passivity-Guaranteed Variable Impedance and Compliance Control via Online Parameter Optimization

Huseyin Tugcan Dinc, Ersin Daş, Nikolas Thelenberg, Christian Ott

cs.RO eess.SY ·submitted 2026-11-07 15:04 UTC · v1

Abstract

Variable impedance control enhances the interaction capability of robot manipulators by adapting impedance parameters online. However, time-varying impedance parameters may inject energy into the system and violate passivity, particularly when tasks demand rapid stiffness changes. Existing methods address this by increasing damping or limiting the stiffness profile, which often degrades the dynamic response. In this work, we propose a quadratic programming-based parameter optimization framework that guarantees passivity by modulating the desired inertia to compensate for energy injected by stiffness variations, while preserving a critically damped system. For the case of diagonal impedance matrices, we optimize the rates of change of inertia and stiffness subject to a passivity constraint formulated as a convex quadratic program. We extend the framework to compliance control, where the desired inertia is coupled to the robot's configuration-dependent inertia matrix. We use an eigendecomposition based on Cholesky factorization to optimize the spectral weights while maintaining passivity. Experiments on the Kinova Gen3 7-degree-of-freedom manipulator validate both methods with human interaction perturbations. Comparisons with an energy tank approach and a nonpassivity-based method demonstrate that the proposed framework achieves less conservative stiffness tracking without requiring an energy reservoir or damping overhead.

Comment
submitted to Control Engineering Practice

Closest papers

Nearest neighbours by meaning across the whole index.

Task-Space Motion-Force Nonlinear Model Predictive Control for Precise and Compliant Control under Uncertainties

cs.RO ·2026-10-12 ·Quang-Nam Nguyen, Ludovic Righetti
hot direction similarity 0.66
Abstract

In Nonlinear Model Predictive Control (NMPC), the control law is implicitly determined by the solution of an Optimal Control Problem (OCP). Consequently, OCP design is often tailored to specific platforms and tasks, demanding extensive expert knowledge and tuning effort. To address this, we propose a unified NMPC framework that directly plans and controls the robot joints subject to task-space motion and force requirements and is capable of seamlessly generalizing across multiple robotic platforms and diverse tasks. Furthermore, optimization-based methods often treat interactions as rigid contacts, making the torque solution sensitive to the modeling errors of the robot dynamics and the environment. We study the intrinsic task-space impedance of our proposed controller, its partial contraction for differential stability and differential passivity under unmodeled interactions. As a result, our framework enables closing the force-feedback loop in the high-level planning layer to achieve precise motion-force tracking performance, addressing the long-standing challenge of force-feedback NMPC. Finally, we validate our framework on physical hardware, demonstrating hybrid motion-force control on a redundant manipulator and compliant locomotion on a quadruped, while preserving core NMPC advantages such as hard constraint satisfaction, optimal redundancy exploitation, and real-time planning under unforeseen interactions.

0.42

Constraint-Decomposed Impedance Control from Generative Policy for Articulated Object Manipulation

cs.RO ·2026-10-12 ·Kyungseo Park, Byeongdo Lim, Jungbin Lim, Minseok Choi, Frank C. Park
publishedcode/data similarity 0.62
Abstract · Accepted to the 10th Conference on Robot Learning (CoRL 2026), Spotlight. Please cite the CoRL 2026 (PMLR) version. Project page: https://er…

Articulated object manipulation tasks such as opening doors, tightening bolts, and pulling drawers impose kinematic constraints on a robot end-effector's motion that neural policies may fail to satisfy. Unlike hybrid force-position control that strictly separates force and position control into orthogonal subspaces, impedance control modulates a mechanical impedance system in the form of a virtual inertia, damping, and stiffness. However, selecting task-appropriate impedance gains remains challenging for robot policies. In this paper, we address this problem for the case of manipulating articulated objects. Our constraint-decomposed impedance control method uses the sampling diversity of a generative policy to estimate the feasible motion directions in twist space. The key idea is to infer the feasible and constrained subspaces of twists from an ensemble of trajectories generated by the policy from the same observation. Principal component analysis (PCA) of the end-effector twists determines the feasible twist subspace, which is then used to form 6x6 impedance gain matrices. For many common articulated objects, the feasible twist subspace is independent of the object configuration, so the subspace and resulting gains are estimated once and held fixed during manipulation, minimizing computational overhead. For less common cases where this independence does not hold, we instead estimate a configuration-independent twist subspace of higher dimension that contains the local feasible subspaces, allowing the same fixed-gain strategy to be used. Experiments across simulated and real-world single- and multi-DoF objects show that the proposed method consistently reduces constraint-violating contact loads relative to isotropic impedance control while maintaining task execution.

0.38

Safe Physical Interaction of All-Electric Heavy-Duty Robotic Manipulators via Control Barrier Functions and Variable Impedance Control

cs.RO ·2026-11-16 ·Amir Hossein Barjini, Mohammad Bahari, Jouni Mattila
similarity 0.59
Abstract

All-electric heavy-duty robotic manipulators are increasingly expected to operate close to tunnel walls, equipment, and other structures while retaining the force capability required for large-payload tasks. Accurate motion control alone does not address the resulting safety and interaction requirements. This paper develops a safety-aware physical-interaction architecture that combines variable impedance control (VIC) with control barrier functions (CBFs) on top of an established virtual decomposition control (VDC) framework for electromechanical linear actuator (EMLA)-driven manipulators. VIC continuously adapts the task-space stiffness and damping according to predicted proximity and contact risk, whereas a joint-velocity CBF filter enforces Cartesian workspace boundaries and the physical stroke limits induced by the closed-chain lift and tilt mechanisms. To account for nonideal realization of the filtered velocity by the inner VDC/EMLA dynamics, the CBF inequalities are tightened using a measured bound on the joint-velocity tracking error. Four configurations, namely VDC, VIC+VDC, CBF+VDC, and VIC+CBF+VDC, are evaluated under workspace, actuator-limit, and physical-interaction scenarios. VIC reduces the peak and RMS environment-interaction forces by 92.59% and 96.33%, respectively; both robust CBF configurations maintain positive workspace and EMLA safety margins, while VIC+CBF+VDC reduces the CBF intervention metric by 10.30% compared with CBF+VDC.

0.27

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

cs.RO cs.GRcs.LG ·2026-11-14 ·Matthias Jammot, Pembe Gizem Özdil
code/data similarity 0.58
Abstract · 39 pages, 13 figures, 28 tables. Project page: https://impedancemimic.github.io/ImpedanceMimic/

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

0.17

CompliantWBC: Whole-Body Compliance for Heavy Humanoids via Force Latent Estimation and Residual Impedance Targets

cs.RO ·2026-09-27 ·Tan-Dzung Do, Cuc T. Trinh, Tuan Dat Phuong, Chien Le, Thanh Ly +2 more
similarity 0.58
Abstract · Project website: https://dotandung.github.io/compliantwbc/

Whole-body compliant control is essential for deploying heavy humanoids under high payload in human-centric environments. Most prior force-aware learning-based pipelines focus on end-effector resistance, per-link upper-body springs, or end-effector stiffness modulation, leaving arbitrary-site perturbations on heavy platforms with lower-body engagement largely unaddressed. We close this gap with CompliantWBC comprising: (1) A base policy trained with RL to maximize compliance-fidelity reward, guided by a multi-site whole-body impedance reference controller, extending classical Cartesian impedance to any controlled link; (2) A bounded residual policy that edits the per-link impedance equilibrium over a frozen base, correcting the coarse but structured wrench estimate supplied by a force encoder co-trained behind a gradient barrier; (3) A Phong-weighted force-origin sampler with an axis-decoupled pelvis anchor induces lower-body-inclusive compliance curriculum training via two interpretable parameters. We evaluate CompliantWBC in simulation against both compliant and stiff baselines, achieving best compliant fidelity of 2.58cm deviation from analytical solutions, and demonstrate it on a real heavy humanoid across static/dynamic force reaction, board wiping, squat under payload, and cooperative payload transport. Project website: https://dotandung.github.io/compliantwbc/

0.46

Behavior--Realization Separation for Constrained Physical Human--Robot Interaction

cs.RO eess.SY ·2026-09-01 ·Yongyan Cao
similarity 0.57
Abstract

Physical human--robot interaction software often couples desired-behavior specification with constrained realization; we treat these as separate layers. A \emph{behavior layer} supplies a desired contact-port acceleration $a_k^{\mathrm{id}}=f_θ(e_k,\dot e_k,F_{h,k})$. A \emph{realization layer} converts it into constrained robot commands and reports total desired-versus-realized acceleration error instead of hiding it in saturation. A same-objective unconstrained counterfactual separates regularization from constraint intervention, while plant data expose model error. This paper implements a receding-horizon quadratic program realizing memoryless affine behaviors. Changing the behavior modifies objective coefficients through $(C_θ,G_θ)$ while the robot-command variable and feasible set remain unchanged. A planar study instantiates impedance and admittance; the same running layer accepts an impedance--admittance--impedance reassignment without reconstruction, under its existing rate limit. On a torque-controlled 7-DOF Franka FR3 in MuJoCo, the runtime freezes task-space dynamics per solve and enforces torque feasibility across its horizon. Under a sustained 20~N push, it holds a slack-relaxed workspace boundary to within approximately 0.1--0.2~mm, versus 4.4~cm (impedance) and 4.7~cm (admittance) overshoot from instantaneous clipping. A derated actuator budget then activates the torque constraint: horizon-wide enforcement keeps its frozen-model plan feasible to $2.1\times10^{-4}$~N$\cdot$m, whereas a first-step-only ablation plans up to 11.329~N$\cdot$m beyond budget; on the executed nonlinear plant, where both share the same local-model error, the gap is smaller but still favors horizon-wide enforcement (0.161 vs.\ 0.380~N$\cdot$m). These results are a focused proof of behavior--realization separation.

0.23

Real-Time Dynamics-Based Torque-Sampling MPPI for Compliant and Force Aware Manipulation

cs.RO ·2026-09-02 ·Euncheol Im, Taehyun Kim, Yonghwan Oh, Myotaeg Lim, Yisoo Lee
published similarity 0.57
Abstract · 8 pages, 6 figures. Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This study proposes a novel Model Predictive Path Integral (MPPI)-based task-space control framework. The proposed framework explicitly solves rigid-body dynamics within a real-time MPC formulation and enforces safety constraints, enabling accurate motion and force control that yields compliant behaviors for safe and effective physical interaction of robotic manipulators in unstructured environments. By leveraging MPPI, the proposed framework efficiently handles nonlinear dynamics that are difficult to solve with conventional MPC approaches in real-time. Furthermore, we develop a torque-sampling-based control architecture that enables efficient exploitation of GPU-based parallelization, resulting in effective compliant and force-aware behaviors. As a result, the proposed framework achieves a solver update rate of over 166 Hz with a 0.18 s prediction horizon, and its performance is validated through real-world experiments on a 7-DoF manipulator.

0.38

AeRSoM: An Aerial Rigid-Soft Integrated Manipulator for Contact-Rich Manipulation

cs.RO ·2026-09-22 ·Jiacheng Liang, Hang Zhong, Yaonan Wang, Ge Chen, Zhixing Zhang +3 more
similarity 0.56
Abstract

Contact-rich aerial manipulation remains fundamentally challenging because interaction forces are directly transmitted to the aerial platform, often leading to instability and degraded task performance. While compliant manipulators can mitigate these effects, existing aerial manipulation systems typically struggle to reconcile interaction compliance with manipulation precision. To this end, this article presents an aerial rigid-soft integrated manipulator (AeRSoM) robot that realizes embodied compliance for aerial manipulation. The proposed system integrates a fully actuated aerial platform, a rigid-soft manipulator, and variable-stiffness regulation to simultaneously achieve stable flight, compliant interaction, and precise manipulation. By distributing compliance throughout the manipulation system, the proposed design leverages distributed embodied compliance to passively absorb contact disturbances while preserving sufficient stiffness for task execution. To fully exploit the mechanical design, a composite control framework is developed for precise end-effector trajectory tracking in the presence of uncertainties and external disturbances. Extensive real-world experiments are conducted in representative contact-rich aerial manipulation tasks, including dynamic transmission-line grasping, physical interaction with a wind turbine blade, peg-in-hole, and screwing operations. The results demonstrate that the proposed rigid-soft integration significantly improves interaction robustness and task adaptability while maintaining manipulation accuracy, highlighting that embodied compliance provides a promising design paradigm for enhancing the safety, robustness, and versatility of aerial manipulation.

0.20