CS Paper Radar

Safe Physical Interaction of All-Electric Heavy-Duty Robotic Manipulators via Control Barrier Functions and Variable Impedance Control

Amir Hossein Barjini, Mohammad Bahari, Jouni Mattila

cs.RO ·submitted 2026-11-16 16:07 UTC · v1

Abstract

All-electric heavy-duty robotic manipulators are increasingly expected to operate close to tunnel walls, equipment, and other structures while retaining the force capability required for large-payload tasks. Accurate motion control alone does not address the resulting safety and interaction requirements. This paper develops a safety-aware physical-interaction architecture that combines variable impedance control (VIC) with control barrier functions (CBFs) on top of an established virtual decomposition control (VDC) framework for electromechanical linear actuator (EMLA)-driven manipulators. VIC continuously adapts the task-space stiffness and damping according to predicted proximity and contact risk, whereas a joint-velocity CBF filter enforces Cartesian workspace boundaries and the physical stroke limits induced by the closed-chain lift and tilt mechanisms. To account for nonideal realization of the filtered velocity by the inner VDC/EMLA dynamics, the CBF inequalities are tightened using a measured bound on the joint-velocity tracking error. Four configurations, namely VDC, VIC+VDC, CBF+VDC, and VIC+CBF+VDC, are evaluated under workspace, actuator-limit, and physical-interaction scenarios. VIC reduces the peak and RMS environment-interaction forces by 92.59% and 96.33%, respectively; both robust CBF configurations maintain positive workspace and EMLA safety margins, while VIC+CBF+VDC reduces the CBF intervention metric by 10.30% compared with CBF+VDC.

Closest papers

Nearest neighbours by meaning across the whole index.

Jacobian State Augmented Viable Kinematic Safety Filter

cs.RO eess.SY ·2026-10-11 ·Siddharth Singh, Joshua Vaughan
similarity 0.63
Abstract · 8 pages, 8 figures, conference submission

Safety Filters (SF) are leveraged to design certifiably safe controllers, which ensures forward invariance on a defined safe set when the filter is feasible. Predictive Safety Filters (PSF) embed these constraints to a closed-loop model-based optimization method to improve constraint satisfaction, and reduce feasibility loss caused by myopic, one-step filtering. Related viability-based methods emphasize approximating a viability kernel which ensures admissible control for all future time, but requires significant computational expense. This work introduces a Jacobian-based kinematic safety filter leveraging an augmented state variable with task-space velocity and filters task-space acceleration to preserve the feasibility of a low-level filter while enforcing joint position and velocity. The proposed method introduces a nested Quadratic Program (QP) formulation, defines a conservative inner approximation of viability envelope and computes a viable planner online. The method is validated in a simplified 2R planar manipulator simulation environment and shows significant improvement compared to a baseline Control Barrier Function Quadratic Program (CBF-QP) based filter. The experiments highlights the improvements in terms of computation time compared to traditional PSF and Reference Governor approach while also showing significant reduction in feasibility violations. Lastly, a simplified demonstration on a simulated 6-DoF manipulator highlights the potential scalability of the method to higher degree-of-freedom setups.

0.13

Singular Perturbations for Control Systems Safety

eess.SY math.OC ·2026-10-31 ·Stefano Di Gregorio, Guido Carnevale, Giuseppe Notarstefano
similarity 0.62
Abstract

Control Barrier Functions (CBFs) offer a powerful theory for enforcing safety in dynamical systems. Yet, applying this framework to complex systems is challenging when subsystems are feedback-interconnected and operate at different timescales. Such structures arise naturally in multiphysics systems and in control architectures where physical plants interact with optimization, estimation, and control algorithms. In many of these settings, safety involves only part of the system, motivating the design of reduced-order certificates. Inspired by singular perturbation theory, we establish sufficient conditions, involving separation between slow and fast dynamics, under which a reduced-order safety certificate can be lifted to the full interconnected system. Specifically, we construct a composite CBF ensuring forward invariance of a lifted subset of the original safe set. We also show that the certified safe set expands monotonically as the tuning parameter accelerating the fast dynamics is reduced. Numerical results validate the approach on two robotic systems: a planar 2-DoF manipulator with motor dynamics and a 6-DoF UR10e manipulator controlled by a suboptimal optimization algorithm.

0.16

RoboCompiler: Graph-Native Compilation of Closed-Chain Robots for Consistent Modeling, Control, and Simulation

cs.RO ·2026-09-28 ·Mehdi Heydari Shahna, Joongheon Kim, Jouni Mattila
code/data similarity 0.60
Abstract · GitHub: https://github.com/Mehdi-Heydari-Shahna/RoboCompiler

Robots with kinematic loops, coupled actuators, and changing contacts require consistent models of configuration, motion, force, and dynamics. Yet these interfaces are often reconstructed separately for control and simulation, making closure and actuation consistency difficult to maintain. This paper presents RoboCompiler, a graph-native framework that compiles a canonical mechanism graph into a shared mechanical interface. From bodies, joints, frames, inertias, and actuator ports, it constructs closure paths and analytic residual Jacobians, then assembles feasible configurations through rank-checked continuation and correction. A tangent lift maps independent velocities to full robot and task motion, while paired actuator-port maps preserve virtual work. A constraint-curvature correction extends the reduction to accelerations and projected rigid-body dynamics, including floating-base and support modes. Cycle-local evaluation, generated Jacobians, and dependency-aware reuse enable localized updates when closure inputs change. We evaluate physical loops and task-induced constraints on a industrial excavator, Unitree Go2, Franka Panda, Kangaroo, and a six-UPS Stewart platform. High-precision constrained-dynamics and independent Pinocchio checks confirm mechanical consistency; MuJoCo and Isaac Sim/PhysX executions demonstrate task performance and model reuse under native contact. For Kangaroo, compilation reduces residual-and-Jacobian evaluation time by 96.7% and closed-loop rollout wall time by 66.8%, with dynamics and control held fixed.

0.53

Passivity-Guaranteed Variable Impedance and Compliance Control via Online Parameter Optimization

cs.RO eess.SY ·2026-11-07 ·Huseyin Tugcan Dinc, Ersin Daş, Nikolas Thelenberg, Christian Ott
similarity 0.59
Abstract · submitted to Control Engineering Practice

Variable impedance control enhances the interaction capability of robot manipulators by adapting impedance parameters online. However, time-varying impedance parameters may inject energy into the system and violate passivity, particularly when tasks demand rapid stiffness changes. Existing methods address this by increasing damping or limiting the stiffness profile, which often degrades the dynamic response. In this work, we propose a quadratic programming-based parameter optimization framework that guarantees passivity by modulating the desired inertia to compensate for energy injected by stiffness variations, while preserving a critically damped system. For the case of diagonal impedance matrices, we optimize the rates of change of inertia and stiffness subject to a passivity constraint formulated as a convex quadratic program. We extend the framework to compliance control, where the desired inertia is coupled to the robot's configuration-dependent inertia matrix. We use an eigendecomposition based on Cholesky factorization to optimize the spectral weights while maintaining passivity. Experiments on the Kinova Gen3 7-degree-of-freedom manipulator validate both methods with human interaction perturbations. Comparisons with an energy tank approach and a nonpassivity-based method demonstrate that the proposed framework achieves less conservative stiffness tracking without requiring an energy reservoir or damping overhead.

0.23

Robust Semi-passive Velocity Field Control with Boundedness Guarantees for Safe Interaction between Mechanical Systems and Physical Environment

eess.SY cs.RO ·2026-08-31 ·Van Trong Dang, Sumitaka Honji, Takahiro Wada
similarity 0.58
Abstract

Controllers that guarantee energetic passivity with respect to the pair of external force and velocity realize safe interaction between the mechanical system and its physical environment. However, solely adhering to energetic passivity constraints may impose fundamental limitations on control performance and, in some cases, prevent the successful execution of controlled tasks. In addition, external disturbances from the physical environment can drive the system energy level and states beyond operational regions, thereby undermining task performance and safety. In this paper, we study a robust time-varying semi-passive velocity field control to aim to relax the inherently conservative nature of fully passive control methods in a controlled manner. Specifically, the proposed control method guarantees passivity of the closed-loop system with respect to the force-velocity input-output pair when the energy level exceeds a predefined level, while permitting non-passive behaviors to preserve task performance otherwise. Furthermore, the energy level and the states of the closed-loop system are proved to converge to bounded domains even in the presence of unpredicted disturbances. Additionally, the proposed method also enables constraining power flow between the closed-loop system and its physical environment to enhance safety in the interaction process. Numerical simulation examples demonstrate the effectiveness of the proposed method.

0.21

Actuation and Control of Passive Tendon-Driven Soft Extensions Through Rigid Manipulator Motion

cs.RO ·2026-11-11 ·Ignacio Cuiral-Zueco, Gonzalo López-Nicolás, Youcef Mezouar
theorycode/data similarity 0.58
Abstract · 16 pages, 12 figures. Soon to be submitted to the IEEE Transactions on Robotics. Code: https://github.com/nachocz/passive_soft_extension_con…

Industrial manipulators offer reach and precision but can damage nearby structures in confined spaces. Soft robots provide compliant contact but typically have limited reach. Rigid-soft systems combine their advantages, although they often require dedicated actuation and control hardware. We propose actuating a passive tendon-driven soft extension through manipulator joint motion. As the robot moves, the exterior spans of tendons anchored to upstream links change, altering tendon tension and deforming the extension. Inspection through narrow apertures, for example, constrains the motion of the end effector (EE). We develop a controller that regulates the soft tip while preserving such EE constraints. A differential model separates rigid transport from soft deformation, combining analytic arm and tendon kinematics with a locally identified span-to-deformation map. We also derive a local upper bound on the number of independent deformation directions transmitted by the tendons under the EE constraint, and conditions for the exponential convergence of the tip error. A quadratic program with control barrier functions imposes obstacle clearance, fulcrum limits, and model-validity conditions. Simulations and real experiments show tip and shape regulation under free, position-constrained, and fulcrum-constrained EE motion.

0.42

Safety-Critical Bilateral Teleoperation for Omnidirectional Aerial Manipulation Using Force-Sensorless Haptic Feedback

cs.RO ·2026-08-22 ·Yubin Kim, Jinwoo Lee, Yongjun You, H. Jin Kim, Jeonghyun Byun
published similarity 0.58
Abstract · 8 pages, 10 figures. Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This paper presents a safety-critical bilateral teleoperation framework for omnidirectional aerial manipulators that integrates visual and force-sensorless haptic wrench feedback. Unlike existing approaches that either rely on onboard force/torque sensors or use model-dependent wrench estimates, which may become unreliable under model uncertainties or induce unintended feedback during free-flight, our method implements a hierarchical safety filter based on control barrier functions to avoid such limitations. The safety filter, being the key contribution, explicitly accounts for tracking errors arising from physical interaction between the aerial manipulator and its surroundings while enforcing thrust limits, a factor overlooked despite its critical importance for flight safety. This safety filter adjusts the command from the operator to ensure safe and stable aerial manipulation and avoid motor saturation. The adjustment made by the filter is mapped to haptic feedback, which is intuitive to the operator and conveys information on physical interaction and impending motor saturation. By actual experiments with a hexarotor-based omnidirectional aerial manipulator, we demonstrate that the proposed method avoids haptic feedback during free-flight, provides directionally consistent feedback under physical interaction, and can be operated for diverse manipulative tasks. Moreover, an ablation study further shows that the saturation filter improves interaction stability by explicitly preventing motor saturation and informing the operator of corrective actions.

0.37

Safety-Constrained Intelligent Control of a 2-DOF Robotic Manipulator Using Control Barrier Functions

cs.RO eess.SY ·2026-11-09 ·Gabriel da Silva Lima, Made Widhi Surya Atman, Wallace Moreira Bessa
similarity 0.58
Abstract · Paper submitted to the European Control Conference 2027

Control barrier function (CBF) filters depend on dynamic models that can be inaccurate when their parameters and external forces are uncertain. This paper investigates a radial basis function (RBF) neural network compensator whose output is shared by a Cartesian tracking controller and a joint-space CBF filter. An auxiliary state driven by the difference between requested and applied torques corrects the learning signal, reducing the direct influence of filter intervention on adaptation. A two-link manipulator is evaluated through constrained regulation, ablations, matched uncertainty and disturbance trials, and operating-range and timing studies. The results demonstrate that the proposed controller improves tracking while maintaining joint, velocity, and torque limits under parameter uncertainty, and that both the shared compensation and the auxiliary correction contribute to this improvement.

0.22