CS Paper Radar

An Interpretable Fuzzy Tree for Turbofan Remaining Useful Life with an Auditable Per-Component Diagnostic Layer

Hugo Henry, Bharadwaj Dogga, Scott Philips, Kelly Cohen

cs.AI ·submitted 2026-11-08 21:31 UTC · v1

Abstract

Data-driven remaining useful life (RUL) estimators for turbofan engines are accurate but opaque, and their internal features typically encode remaining life rather than any specific component's state. This paper presents an interpretable genetic fuzzy tree that predicts RUL from cruise-condition sensor means on N-CMAPSS while exposing a per-component diagnostic layer inspectable rule by rule. The tree follows the engine hierarchy: sensors to component health, then to bounded component damage, spool damage, and RUL, so each level answers a different maintenance question. Training is staged so the prognostic objective cannot reshape the diagnostic layers: health leaves are fitted to physical targets and frozen, a deterministic fuzzy damage map with fleet-referenced thresholds is imposed on each component, and only the aggregation is optimized for RUL. It consumes 13 cruise-mean scalars per cycle rather than a trajectory, which removes any sequence model. On the native split it reaches 8.44 cycles RMSE on the multi-fault subset and 11.51 across all modes with 333 free parameters, 411 total rules, 32 to 12,000 times fewer than compiled baselines. An exhaustive sensor search bounds which components are diagnosable under the tested cruise-mean design, and the rule base is structured to admit formal verification, which this study does not discharge.

Comment
16 pages, 3 figures, 3tables and 6 equations

Closest papers

Nearest neighbours by meaning across the whole index.

Explainable Predictive Condition-based Maintenance of Naval-Propulsion Systems using Fuzzy Logic

cs.LG ·2026-09-21 ·Dionisis Kalogeropoulos, Georgia Sovatzidi, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis
published similarity 0.64
Abstract · Accepted at the 30th Pan-Hellenic Conference on Informatics (PCI 2026)

The shipping industry has a significant impact on the global economy, emphasizing the need for operational availability and safety through the use of effective maintenance techniques. During the last decades, predictive maintenance (PdM) has emerged as a promising solution compared to the existing conventional maintenance systems. This is because it offers several advantageous functions, such as damage predictions for vessel components, reduced downtime, improved and extended life of machinery, as well as higher safety during voyages. However, existing methodologies developed for performing PdM do not provide explanations of their results to users, so that they can understand the failures that may occur. To address this limitation, this paper proposes a novel framework based on a fuzzy decision tree and a deep residual neural network, aiming to perform explainable PdM on naval vessels. The proposed framework is able to generate fuzzy local rules based on the dataset used, and can provide explanations of its outcomes, using cause-and-effect relationships, in a way that are understandable to users, thereby gaining their trust. Experiments using a publicly available dataset demonstrate the effectiveness of the proposed framework, as it achieves an accuracy of 99.24%.

0.43

Physics-Constrained Autoencoder for Interpretable Health Representation Learning in Turbofan Engines

cs.LG eess.SP ·2026-11-10 ·Leonardo Baldo, Jokin Alcibar Ibarzabal, Daniel Cisneros Acevedo, Kai Goebel, Manuel Arias Chao
similarity 0.56
Abstract

Health Indices (HIs) summarize degradation from operational data and support diagnostic and prognostic tasks in Prognostics and Health Management (PHM). Their usefulness depends on capturing degradation and interpreting system condition. Autoencoders learn such representations from unlabelled monitoring data; however, when training is driven only by reconstruction, the physical meaning of latent variables remains undefined, limiting their interpretation and diagnostic value. This work proposes a physics-constrained autoencoder that embeds system knowledge as an inductive bias in the decoder architecture and as a learning bias in the loss function. The decoder contains differentiable physical equations that receive latent variables and operating conditions as inputs, structurally guiding each latent variable to represent a predefined physical quantity and enabling component-level analysis before aggregation into a system-level HI.The methodology is benchmarked on the N-CMAPSS dataset against alternative representations. Reconstruction reaches an $R^2$ of 0.9993 and an MAE of 0.0036, comparable to fully data-driven models. After operating-condition correction, the inferred physical quantities track degradation, and their aggregation produces an HI with a Spearman correlation of 0.9791 with the ground truth, an RMSE of 0.0286, and an MAE of 0.0233. The methodology is further evaluated using a single model trained across four datasets representing distinct degradation scenarios. This model preserves component-level signatures that distinguish compression-side from expansion-side degradation without diagnostic labels.Finally, the proposed framework enables degradation trends to be visualized on component maps, providing a health representation in a form familiar to engine operators and domain experts.

0.22

A Deep Learning-Based Stacking Ensemble Framework for Turbofan Engine Remaining Useful Life Prediction

cs.AI ·2026-08-28 ·Limon Bin Hossain, Md. Salehin Seyam, Md Rashedul Islam, Abdur Rahman, Md Sharifuzzaman
benchmark similarity 0.55
Abstract

This study proposes a two-level stacking ensemble framework for Remaining Useful Life (RUL) prediction of turbofan engines, evaluated on the NASA C-MAPSS benchmark using the FD001 and FD003 subsets. The framework integrates four heterogeneous deep learning base learners: Long Short-Term Memory (LSTM), Convolutional Neural Network (CNN), CNN-LSTM, and CNN-GRU, whose out-of-fold predictions are combined by an XGBoost meta-learner to capture complex degradation patterns while mitigating individual model biases. Comprehensive experiments demonstrate that the stacking ensemble achieves superior predictive performance, with Root Mean Square Error (RMSE) of 9.989 and 8.613, Mean Absolute Error (MAE) of 7.081 and 5.195, and R-squared values of 0.899 and 0.906 for FD001 and FD003, respectively. Compared to the best-reported baseline (TCAT: RMSE 11.12 and 11.02), the proposed method achieves RMSE reductions of 10.2 percent and 21.8 percent for FD001 and FD003, respectively. Feature correlation analysis, residual diagnostics, and training convergence curves validate the model's robustness. These findings underscore the efficacy of stacking ensemble methods for prognostics and health management in safety-critical aerospace applications.

0.29

Sensor Diagnosis for Fuel and Emissions Monitoring in Heavy-Duty Diesel Vehicles

cs.LG eess.SY ·2026-10-15 ·Tejas Dahiya, Saurabh Kumar Gupta
published similarity 0.54
Abstract · Accepted at the Tackling Climate Change with Machine Learning workshop at NeurIPS 2026

Faulty sensor readings can distort estimates of fuel use and carbon dioxide emissions from diesel engines. We evaluate two procedures that use relationships learned from healthy measurements to diagnose faults and guide fuel correction. The diagnosis procedure tests whether replacing a suspected faulty reading with an estimated healthy value helps a model predict another sensor's recorded reading more accurately. It then predicts the fault type and decides whether to report the diagnosis. We evaluate five synthetic fault types on 217 steady-state operating points from a heavy-duty diesel engine, excluding all measurements at selected engine speeds from training. Across 31,500 fault-injected groups of 20 operating points, it issues diagnoses for 77.3% of groups, with 92.1% of diagnoses issued on these groups correct. The fuel correction procedure uses a different sensor-selection rule at individual operating points, testing how each replacement changes the largest prediction error across all six sensors. Fuel correction requires a fault alarm and engine speed and torque close to the training conditions. A fuel reading is replaced only when its replacement reduces the largest prediction error sufficiently more than replacements for the other sensors. Assuming faults in 1% of one-hour scenarios, equally likely sensors and fault types, and equal time at each measured condition, selected fuel corrections reduce mean absolute error in calculated combustion CO2 by 83.8%. On this engine map, learned relationships support complete sensor diagnoses and fuel corrections that improve emissions accounting while preserving unaffected readings.

0.34

Explainable Neuro-Fuzzy Prediction for Trustworthy Decision-Making in Maritime

cs.LG ·2026-09-21 ·Dionisis Kalogeropoulos, Georgia Sovatzidi, Dimitris K. Iakovidis
publishedbenchmark similarity 0.53
Abstract · Accepted at the 34th European Signal Processing Conference (EUSIPCO 2026)

Predicting when maritime systems require maintenance can be critical, avoiding hazards and costly consequences. To address this problem, this paper proposes an explainable decision-making framework that integrates a neuro-fuzzy prediction model with a two-stage explainable component. The first stage of this component produces feature-attribution explanations, using gradient-based saliency maps, and the second stage extracts local rules using a fuzzy decision tree. The proposed framework is generic and can be integrated into any deep learning-based approach, rendering it explainable. To the best of our knowledge, this is the first fuzzy logic-based framework enabling both feature-level and local rule-based explanations of black box models. This approach aims to foster trustworthiness in decision making through user-understandable machine inferences. The performance of the proposed framework using a deep residual-based neural backbone is evaluated on various general-purpose public benchmark datasets, and its utility in maritime is demonstrated in the context of early fault detection in a naval propulsion system dataset. The results indicate that it can provide predictions outperforming relevant state-of-the-art approaches, with an average AUC-ROC (Area Under the Receiver Operating Characteristic Curve) value, reaching up to 99%, while offering the advantage of explainability.

0.35

LLM Ensemble Fault Classification for Automotive HiL Validation

cs.SE ·2026-08-11 ·Hamza Ouarrad, Mohammad Abboush, Andreas Rausch
top venue similarity 0.52
Abstract · 8 pages, 3 figures. Accepted at the 23rd Workshop on Model Driven Engineering, Verification and Validation (MoDeVVa 2026), co-located with M…

Automotive HiL validation generates large multivariate test recordings whose analysis remains challenging due to manual review effort, rule-based limitations, and the need for explainable diagnostic decisions. Recent machine-learning and deep-learning approaches have improved fault diagnosis, but they often require large labelled datasets, generalise poorly across operating conditions, and provide limited insight into their predictions. This paper proposes an explainable multi-LLM ensemble framework for sensor-level fault classification in automotive validation. The framework uses compact evidence representations of fault-injection recordings and combines the outputs of heterogeneous large language models to improve diagnostic robustness, ranking quality, confidence reliability, and interpretability. The approach is evaluated on gasoline-engine and electric-vehicle HiL systems across three driving settings and ten single-fault classes. Among the individual models, Mistral Small~24B provides the strongest overall single-model trade-off, achieving 0.903 Top-1 accuracy, 0.887 MCC, and the lowest Brier score of 0.102. The final Top-3 ensemble combines Mistral Small~24B, Qwen2.5~32B, and Phi-4~14B using confidence-weighted voting, improving the scenario-averaged results to 0.917 Top-1 accuracy, 0.913 macro F1, and 0.902 MCC, while also providing the best calibration among the tested ensemble strategies. A Top-5 ensemble does not improve over the Top-3 configuration, indicating that model complementarity is more important than ensemble size. The results show that coordinated multi-LLM reasoning can support robust, calibrated, and engineer-interpretable fault classification for automotive HiL validation.

0.35

FedCMAPSS: A Benchmark for Federated Learning in Remaining Useful Life Estimation

cs.LG ·2026-08-26 ·Amelia Sorrenti, Matteo Pennisi, Concetto Spampinato, Simone Palazzo
publishedbenchmarkcode/data similarity 0.52
Abstract · Accepted at the 21st IEEE Conference on Industrial Electronics and Applications (ICIEA 2026)

Data-driven prognostics and health management has emerged as a key enabler for Industry 4.0, yet the development of robust remaining useful life (RUL) estimation models is often limited by the scarcity of run-to-failure data. While federated learning offers a promising paradigm to collaboratively train predictive models without sharing sensor data, research efforts have operated so far in the absence of a common evaluation framework. To address this gap, this paper introduces FedCMAPSS, a benchmark for federated RUL estimation based on the commonly-used NASA C-MAPSS dataset. We define a set of five standardized tasks designed to simulate real-world industrial challenges, ranging from ideal IID settings to extreme statistical heterogeneity, and conduct a systematic evaluation of state-of-the-art federated optimization algorithms across multiple neural architectures. By establishing reproducible baselines and making the source code and data splits publicly available, this work aims to provide a standard foundation for developing and comparing federated predictive maintenance solutions.

0.43

Scalable and Data-Driven Decision Support in the Maintenance, Repair, and Overhaul Process

cs.AI cs.LG ·2026-09-27 ·Houkun Zhu, Helena Ebel, Dominik Scheinert, Florian Schmidt, Jens Altenkirch +1 more
published similarity 0.51
Abstract · Published in: 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)

Several businesses apply maintenance, repair, and overhaul (MRO) principles to the life-cycle of their existing products. In cases like casted gas turbine component Product Lifecycle Management (PLM), repairing components in frequent intervals can extend the lifetime expectation of the product, provide higher cost efficiency compared to newly produced components, and even improve the part design during the repair cycle. Another aspect of repair concerns sustainability, as products often contain rare materials. The emissions produced by the repair process are usually smaller than mining materials and casting new components. To optimize the repair process further, we propose the Smart Expert System (SES), which assists engineering experts with machine learning-based decision support throughout the repair process. We elaborate on its IT architecture and present machine learning models employed for representative MRO use cases. The SES is evaluated using actual industry data from a leading gas turbine company and demonstrably fulfills formulated requirements concerning the suitability of the overall decision support and the stability of the enclosing IT architecture.

0.42