CS Paper Radar

Quadratic Bendixson criterion for delay systems: a numerical implementation

Mikhail Anikushin, Andrey Romanov

cs.MS math.DSmath.OC ·submitted 2026-11-07 18:55 UTC · v1
unusual

Abstract

We present a software implementation (as a Python package) of approximation schemes for verifying frequency inequalities arising from the quadratic Bendixson criterion for systems of delay equations (with a single delay in the linear part). In applications to dissipative nonlinear autonomous systems, such inequalities ensure global stability. The theoretical foundations of this approach were developed in our related work. In particular, it was shown that the transfer operators involved into the frequency inequalities can be represented as integral operators with bounded kernels of the Hardy--Volterra type. Here, we use this representation to construct approximation schemes based on finite-dimensional truncations of the transfer operators. Examples of using the package are provided.

Closest papers

Nearest neighbours by meaning across the whole index.

A New Parametric Uncertainty Approach to Systems with Time-Varying Delay and Feedback Stabilization

eess.SY ·2026-10-27 ·Aleksandr Talitckii, Eduardo S. Tognetti, Peter Seiler, Matthew M. Peet
published similarity 0.51
Abstract

Delay Differential Equations (DDEs) with an uncertain time-varying state delay are often modeled as a feedback interconnection of a nominal time-invariant system with a time-varying uncertainty operator. However, typical choices of uncertainty operators do not admit tight characterizations of input-output properties. In this paper, we propose a new representation of a DDE with time-varying delay system as a feedback interconnection of a nominal fixed delay DDE with a time-varying multiplicative parametric uncertainty operator, where the parameter is bounded in $L_\infty$ norms -- yielding an operator norm bound on the uncertainty. We then provide a modified uncertainty representation which uses the $L_2$ norm of the parameter to bound the operator norm of the uncertainty. Finally, we show that by representing the nominal system using Partial Integral Equations (PIEs), these characterizations of the uncertainty operator can be used for stability analysis or stabilizing feedback controller synthesis. The effectiveness of the approach is illustrated with simple numerical examples.

0.47

Stabilization of Unidirectional First-Order PDE-ODE Coupled Systems with Boundary and Distributed Input Delays

eess.SY math.APmath.OC ·2026-10-08 ·Sanguan Zhong, Jie Qi
top venuetheory similarity 0.50
Abstract · 20 pages, 27 figures. Extended version of the journal paper containing complete technical proofs

The paper considers a system of unidirectional first-order hyperbolic partial differential equations (PDEs) coupled with ordinary differential equations (ODEs), modeling two-phase advective transport processes subject to both boundary and distributed input delays. To address the system defined over two spatial domains, we design a set of three backstepping transformations involving both Volterra- and Fredholm-type integral operators, which introduce eight kernel functions: five associated with the PDE states and three with the ODE states. Since the distributed delayed variable spans the two spatial domains, its transformation must integrate over all state variables, leading to three-dimensional kernel functions with singular initial conditions involving Dirac delta functions that serve as sampling operators to establish mappings between variables of different dimensions. By employing the method of characteristics and successive approximations, we prove the well-posedness of the kernel equations. On this basis, we prove the invertibility of the Fredholm transformation and establish the exponential stability of the closed-loop system in the $L^{\infty}$ norm under the delay-compensated controller. Simulation results for a linear example and a nonlinear screw extrusion model are presented to demonstrate the effectiveness of the proposed method.

0.39

Robust Data-Driven Output Feedback for Systems With Unknown Input Delays

eess.SY ·2026-10-31 ·Ngoc Tuan Dinh, Ba Huy Nguyen, Alexey Peregudin, Egor Dogadin
similarity 0.49
Abstract · 6 pages, 1 figure. Submitted jointly to IEEE Control Systems Letters (L-CSS)

In a history-feedback realization, an input delay increases memory without increasing the number of unknown physical coefficients. We use this structure to design output-feedback controllers for discrete-time systems with one input, one output, and known undelayed order, using noisy input-output data. For a known delay, we derive a necessary and sufficient linear matrix inequality for common-quadratic stabilization of all models consistent with the data. Optimizing its equation-error bound gives a robustness margin for the measured record. For an unknown constant delay in a known interval, we characterize noiseless delay ambiguity and give a sufficient condition for one controller to stabilize all models for every delay consistent with the error bound. Under stated excitation and nondegeneracy assumptions, this procedure is feasible for all sufficiently small equation errors. Numerical examples compare robustness at equal controller memory and show that certified stabilization can succeed while distinct delay models remain compatible with the same data.

0.31

Performance Analysis of Time-Delay Systems under External Perturbations Using Output-to-Output Gain

eess.SY ·2026-08-29 ·Ruslan Seifullaev, André M. H. Teixeira
similarity 0.49
Abstract

Communication delays are inherent in networked control systems and may significantly affect closed-loop performance. This paper investigates the impact of external perturbations in observer-based linear systems with delayed measurements and control signals using the output-to-output gain (OOG) framework. By employing dissipativity theory and Lyapunov--Krasovskii functionals, delay-dependent linear matrix inequality conditions are derived that provide explicit upper bounds on the OOG for systems with independent delays in measurement and actuation channels. In addition, two special classes of constant-delay systems are considered: Padé-approximated systems and finite-dimension reducible systems. Numerical examples illustrate the applicability of the proposed approaches

0.26

New Results for Networked Control of Nonlinear Plants Subject to Transmission Delays

eess.SY ·2026-10-17 ·Ruchao Su, Xianwei Li, Shaoyuan Li
published similarity 0.48
Abstract · Accepted by IEEE CDC 2026. Copyright may be transferred without notice, after which this version might no longer be accessible

This paper studies networked control for nonlinear plants subject to several network-induced constraints, with a particular focus on transmission delays. In the context of general nonlinear networked control systems, a standard approach for guaranteeing stability is to construct a storage function, coupled with a single timer variable, to analyze the maximum allowable transmission interval (MATI) and maximum allowable transmission delay (MAD). In this paper, we propose a new approach that assigns each signal that is either \textit{in transit or most recently updated}, to an individual timer variable. This enables the individual characterization and compensation for the dynamics of each potential updating error. Subsequently, based on a novel construction of timer-coupled storage functions, the dynamics of these timer variables is designed and investigated, leading to less conservative conditions on the MATI and MAD than those by the standard approach while still ensuring closed-loop input-to-state stability with respect to external disturbances. Finally, simulation results are given to illustrate the advantages of these new results.

0.31

Harmonic Stability of Power Systems: A Control-Theoretic Definition and Assessment Criteria

eess.SY ·2026-08-20 ·N. Bhoir, A. Sarkar, J. E. Machado, J. Schiffer
similarity 0.47
Abstract

Harmonic interactions have become a defining dynamic stability phenomenon in converter-based power systems (CBPSs). However, a formalization of the notion of harmonic stability in the context of nonlinear dynamical systems is not available thus far. In this paper, we propose a definition of harmonic stability formulated as a combination of two standard stability notions, namely, bounded-input bounded-output (BIBO) and internal stability properties with respect to any nominal periodic trajectory. Moreover, we rigorously show that the local harmonic stability of any nominal periodic trajectory of nonlinear CBPSs is implied by the stability properties of its linear time-periodic (LTP) approximation. In addition, to enable computationally tractable stability assessment, we develop a framework based on harmonic state-space (HSS) representations of LTP models. In particular, we provide time-invariant linear matrix inequality (LMI) conditions to certify harmonic stability. The proposed methodology is illustrated on a grid-following converter system, where the HSS-based analysis numerically confirms harmonic stability around the periodic operating trajectory.

0.29

Floating-point, exact and certified computation for control: paradigms, pitfalls, and how to combine them

cs.SC ·2026-11-11 ·Christina Katsamaki, Fabrice Rouillier
similarity 0.47
Abstract

Many questions in linear systems theory have a discrete answer: is a polynomial Hurwitz, is a 2-D system structurally stable, is the peak gain finite, which solution of a Riccati equation is stabilizing? Algorithms implemented in floating point usually answer such questions, but often with a limited, or even no, guarantee on the result, which depends on a tolerance fixed a priori. Computer algebra and interval arithmetic provide other ways of computing, which give guarantees on the result, but usually at a higher cost. In this paper, we propose a short guide to these approaches: floating-point, exact, multiprecision and interval arithmetic, certified root isolation and certified Newton methods. Using small examples from control theory (each of them runs in a few seconds), we show what each approach guarantees and in which situations it fails, and how several approaches can be combined, for example by certifying a numerical solution, or by reducing a problem exactly before solving it with certified real solving. We then revisit the structural stability of 2-D systems (with and without parameters) and the computation of the $H_\infty$ norm, and we list the available implementations. The main examples are given as reproducible worksheets based on the PACE ecosystem.

0.32

Periodic fixed-points and their algebraic characteristics in discrete-time Lur'e feedback systems

eess.SY math.OCmath.DS ·2026-09-13 ·Kang Tong, Christian Grussler, Michelle S. Chong
unusual similarity 0.46
Abstract

We study the problem of identifying nontrivial, i.e., nonzero, periodic fixed-points in discrete-time Lur'e feedback systems. Using the circulant matrix constructed from the transfer function of the linear subsystem, whether stable or unstable, we introduce an algebraic framework that allows us to determine when such fixed-points exist. This framework yields a sector bound defined by two vectors, whose slopes correspond to the maximum and minimum positive singular values of the circulant matrix. Assuming that the nonlinear feedback function is memoryless, we show that a necessary condition for the existence of nontrivial $P$-periodic fixed-points is that the intersection of the continuous completion of the nonlinear feedback function with that sector bound contains at least one point other than the origin. Our characterization provides a unified condition valid for all periods $P$, and further enables us to derive upper bounds on the amplitudes of admissible periodic fixed-points with bounded feedback functions. In particular, for relay feedback systems with passive feedback functions, we derive both upper and lower bounds for the amplitudes of such periodic fixed-points.

0.26