CS Paper Radar

Reliable Computation of the $L_{\infty}$-Norm of Linear Time-Invariant Systems Depending on One Parameter

Florent Corniquel, Alban Quadrat, Fabrice Rouillier, Grace Younes

cs.SC ·submitted 2026-11-09 13:59 UTC · v1
unusual

Abstract

The $L_{\infty}$-norm of a linear time-invariant system is a central quantity in robust control, used in robust stability tests, stability margins, and $H_{\infty}$ controller design. Physical models depend on parameters, such as masses, stiffnesses, or gains, so the $L_{\infty}$-norm becomes a function of these parameters. This computation reduces to studying the real critical points of a plane algebraic curve whose coefficients depend on the parameters. Previous approaches based on cylindrical algebraic decomposition describe the $L_{\infty}$-norm on the whole parameter space, but their cost grows very quickly with the number of parameters. In this paper, we propose instead to compute a generic parametrisation of the solutions, valid outside an explicitly characterised set of non-generic parameter values. In the case of one parameter, this parametrisation is obtained by interpolation from a certified solver for the non-parametric case. The resulting algorithm is fully certified, relying on a priori bounds and multimodular computations rather than on Gröbner bases. It is illustrated on examples from the robust control literature.

Closest papers

Nearest neighbours by meaning across the whole index.

Exact Decisions and Certified Values in $L_\infty$-Norm Computation from State-Space Representations

cs.SC math.OC ·2026-11-11 ·Alban Quadrat, Fabrice Rouillier, Grace Younes
benchmark similarity 0.56
Abstract · 6 pages, 1 table. Submitted to the European Control Conference (ECC 2027)

Computing the $L_\infty$-norm of a time-invariant linear ordinary differential control system is a routine task in robust control, usually delegated to floating-point routines that perform well on most practical systems. Behind the numerical value, however, lies a discrete decision: whether a pole lies on the imaginary axis, and whether a mode of a realization is actually a pole of the transfer matrix. Floating-point arithmetic can only replace this decision with a tolerance. This paper explains, for a control audience, what reliable symbolic-numeric computation offers for this problem: exact arithmetic where a decision has to be made, and certified enclosures where a value has to be computed. We show how the problem is turned into a small polynomial system directly from state-space data, how this system is solved in practice, and what it costs. A benchmark on the {\tt COMPleib} library and on families of systems with known norms shows that two standard numerical routines err in opposite directions on the imaginary-axis decision, and never on the same system, while the certified method decides it correctly on every instance tested and computes the norm at a cost comparable to that of the numerical routines on most systems. We conclude with practical guidelines for users of numerical tools.

0.41

Algebraic Characterization of Time-Varying Set Invariance

eess.SY ·2026-11-02 ·S. B. Alaoui, E. J. Wafo Wembe, A. Saoud
publishedtheory similarity 0.51
Abstract · The paper was accepted for publication in the CDC 2026

The verification of temporal forward invariance for dynamical systems subject to time-varying constraints is a foundational problem in the analysis of safety-critical systems. Existing methodologies rely on restrictive geometric assumptions, such as the Linear Independence Constraint Qualification (LICQ), or suffer from exponential computational complexity when applied to time-varying polytopes. This paper establishes a rigorous, unified, and computationally tractable framework for temporal safety verification. First, utilizing tools from nonsmooth analysis, we prove that a Nagumo-type geometric inclusion evaluated strictly on the boundary of the augmented graph is both necessary and sufficient for temporal forward invariance. Second, we provide an algebraic characterization of this condition requiring only the weaker Abadie Constraint Qualification (ACQ), generalizing standard Control Barrier Function (CBF) boundary conditions to non-smooth, multi-constraint domains. Finally, for the practical class of Linear Time-Invariant (LTI) systems with time-varying polytopic constraints, we deploy Farkas' Lemma to eliminate exponential vertex enumeration. By introducing a Lipschitz-bounded time-discretization scheme, we reduce the infinite-dimensional continuous-time verification problem to a finite, highly tractable set of decoupled Linear Programs (LPs).

0.39

Reach-Stabilize Control of Control-Affine Systems with Unknown Affine Parameters

eess.SY math.OC ·2026-10-08 ·Alexander Dorsey, Kunal Garg, Ankit Goel
similarity 0.50
Abstract

This paper considers the reach-stabilize prob- lem for a class of nonlinear control-affine systems with unknown parametric uncertainties, where the system states must remain in a safe set at all times, or enter a safe set in finite time and then remain in it, and converge to a goal point. An estimator is designed that generates a parameter estimate and a computable, nonincreasing bound on the estimation error from a known initial error bound, without requiring persistence of excitation. The bound defines margins that are added to a control barrier and a control Lyapunov function condition, which are then enforced in a quadratic program for efficient control design. It is shown that, for the closed-loop system, the safe set is forward invariant when the system starts within the safe set and is finite-time reachable from outside the safe set with a recovery-time bound that does not depend on the unknown parameter, and that the goal point is exponentially stable. In two numerical examples, with the initial state outside and inside the safe set, the proposed control policy, a baseline oracle control policy that uses the true parameter, both recover or remain in the safe set and converge to the goal point, while another baseline control policy that uses a fixed, incorrect, parameter does not remain

0.18

Floating-point, exact and certified computation for control: paradigms, pitfalls, and how to combine them

cs.SC ·2026-11-11 ·Christina Katsamaki, Fabrice Rouillier
similarity 0.50
Abstract

Many questions in linear systems theory have a discrete answer: is a polynomial Hurwitz, is a 2-D system structurally stable, is the peak gain finite, which solution of a Riccati equation is stabilizing? Algorithms implemented in floating point usually answer such questions, but often with a limited, or even no, guarantee on the result, which depends on a tolerance fixed a priori. Computer algebra and interval arithmetic provide other ways of computing, which give guarantees on the result, but usually at a higher cost. In this paper, we propose a short guide to these approaches: floating-point, exact, multiprecision and interval arithmetic, certified root isolation and certified Newton methods. Using small examples from control theory (each of them runs in a few seconds), we show what each approach guarantees and in which situations it fails, and how several approaches can be combined, for example by certifying a numerical solution, or by reducing a problem exactly before solving it with certified real solving. We then revisit the structural stability of 2-D systems (with and without parameters) and the computation of the $H_\infty$ norm, and we list the available implementations. The main examples are given as reproducible worksheets based on the PACE ecosystem.

0.32

Aeroelastically Constrained Optimal Path Planning of a Fixed-Wing Airborne Wind Energy System

eess.SY ·2026-11-10 ·Omid Heydarnia, Jolan Wauters, Tom Lefebvre, Joris Degroote, Guillaume Crevecoeur
published similarity 0.49
Abstract

Multi-megawatt fixed-wing airborne wind energy systems (AWES) use an aircraft with large, slender wings that deform over the pumping cycle. To harvest maximum energy, the cycle is usually designed by means of dedicated reference trajectory optimization routines. It is well known that such routines rely heavily on the system model and that close alignment between the model and the physical system is required for the results to hold in practice. Nevertheless, the wing is usually treated as rigid and structural limits are respected indirectly through upper bounding of states and inputs. In this work, we directly enforce bounds on the elastic deflection and twist of the wing in the power-maximizing periodic optimal control problem. To that end, we model the wing by root-clamped modes, loaded by strip-theory aerodynamics and by the gravitational and inertial loads of the manoeuvring aircraft. To keep the problem tractable, the modal dynamics are replaced by their quasi-static equilibrium, which enters every discretization interval as algebraic constraints. For a multi-megawatt reference aircraft, the elastic twist near the wing tips reaches $1.03^\circ$ along the optimal rigid-wing trajectory. With a twist limit of $0.6^\circ$, the optimal trajectory delivers $31\,\%$ less mean power than the rigid-wing one, mainly through a lower tether tension during reel-out. Rigid-wing trajectory optimization can thus overestimate the power that the wing limits permit. Forward simulations that retain the modal dynamics demonstrate that the quasi-static deflection and twist deviate from the dynamic ones by less than $2\,\%$ of their limits. This work shows that elastic deformation can be accounted for in the trajectory optimization and that, depending on the wing limits, it can strongly reduce the achievable power.

0.32

Safe Control of Semi-Explicit Differential-Algebraic Systems: Control Barrier Functions with SOS Verification

eess.SY math.OC ·2026-10-07 ·Mohamad H. Kazma, Hongchao Zhang, Abdallah A. Albustami, Ben Wooding, Meiyi Ma +2 more
similarity 0.49
Abstract

Differential-algebraic equation (DAE) systems arise in power networks, multibody mechanics, and chemical processes, where algebraic constraints couple dynamic and algebraic states. Standard control barrier function (CBF) methods, designed for ordinary differential equations, fail for DAE systems because the algebraic constraints impose compatibility requirements that may render safety filters infeasible. This paper develops a safety-critical control framework for semi-explicit DAE systems using CBFs that consider compatibility with the algebraic constraints, termed DAE-aware CBFs. We construct projected vector fields on the constraint manifold to account for the hidden dynamics, while ensuring compatibility conditions that keep the algebraic constraints satisfied. We then present sum of squares (SOS) verification conditions that certify both correctness and feasibility of the resulting DAE-aware CBF. The framework is validated on power system case studies.

0.45

Finite Sample Identification of Analytic Nonlinear Systems

eess.SY math.OC ·2026-08-30 ·Negin Musavi, Ziyao Guo, Geir E. Dullerud, Yingying Li
similarity 0.49
Abstract

This paper studies the identification of linearly parameterized nonlinear (LPN) systems. Although LPN systems share the same linear parameterization structure as linear systems, they are more challenging to identify. In particular, previous work has shown, through a counterexample based on a piecewise-affine system, that non-active exploration is generally insufficient for LPN system identification. In this paper, we consider LPN systems with real-analytic feature functions. We show that non-active exploration is sufficient for the identification of this class of systems by establishing non-asymptotic convergence rates of least-squares estimation and set-membership estimation. In addition, we provide counterexamples to show that non-active exploration may not be sufficient for system identification for non-real-analytic systems, even if those systems are infinitely differentiable. We present numerical experiments to further support and validate our theoretical results.

0.44

Stability Transfer for Autonomous Systems via Higher-Order Taylor-Truncated Lyapunov Certificates

eess.SY math.OC ·2026-10-13 ·Jose D. Hoyos, Zehui Lu, Shaoshuai Mou
published similarity 0.49
Abstract

We develop analytical sufficient conditions for certifying the local asymptotic stability of nonlinear autonomous systems based on Lyapunov functions derived from their finite-order Taylor polynomial approximations. This approach translates the stability analysis problem from the original nonlinear dynamics to a more computationally tractable polynomial domain. The derived conditions allow for the explicit calculation of a guaranteed inner approximation of the region of attraction ($\mathrm{ROA}$). We show how sum-of-squares (SOS) programming and grid search can be used to systematically search for polynomial Lyapunov functions that yield a large certified threshold radius and extract a certified invariant set inner approximation of the $\mathrm{ROA}$ of the nonpolynomial original system. The framework is then applied to a control tuning problem: finding reduced-effort Linear Quadratic Regulator (LQR) controllers that ensure that a given initial state of interest belongs to the certified $\mathrm{ROA}$ of the nonpolynomial closed loop system. The effectiveness of the overall methodology is demonstrated using a pendulum with nonlinear damping and a nonlinear control system.

0.29