CS Paper Radar

Influence of the branching geometry on SPION propagation: coupling of experiment and simulation

Daniel Fleischhauer, Luiz C. P. Wille, Stefan Lyer, Jens Kirchner, Dietmar Drummer

cs.ET q-bio.QM ·submitted 2026-11-10 10:36 UTC · v1
unusual

Abstract

Magnetic Drug Targeting (MDT) is an emerging therapeutic concept in cancer medicine, where superparamagnetic iron oxide nanoparticles (SPIONs) are used as carriers for medication. Their magnetic properties allow for the manipulation of particle transport within the vascular structure and thus targeted delivery to the tumor site. To develop effective concepts for particle steering and accumulation, a detailed understanding of the particle--flow interaction, especially at asymmetric vascular bifurcations, is needed. Based on hierarchical scaling laws, generalized bifurcation geometries with varying degrees of asymmetry were derived and additively manufactured. The particle distribution was investigated by in situ optical measurements under different flow conditions and magnetic field configurations and compared with Lagrangian particle and Volume of Fluid Simulations (VoFS). While the particle mass partition followed the hydraulic flow split in asymmetric bifurcations, density-driven stratification dominated in the symmetric bifurcation, where one daughter branch received only a minor fraction of the particle mass at low flow rates despite carrying half of the flow. The Lagrangian model reproduced the predominantly advective propagation, whereas only the VoFS approach captured the stratification-induced asymmetry. Magnetic actuation counteracted the stratification, reversed the passive branch preference and increased particle retention. From a molecular communication perspective, bifurcation geometry, collective volume effects and magnetic actuation thus jointly determine the received particle signal at vascular bifurcations.

Comment
6 pages, 4 figures; submitted to IEEE ICC for review; Funded by DFG - GRK2950

Closest papers

Nearest neighbours by meaning across the whole index.

Molecular Communication for Plaque Sensing in a Vascular Bifurcation with Receiver Constraints

cs.ET ·2026-11-02 ·Alexander Wietfeld, Luiz C. P. Wille, Pit Hofmann, Jonas Fuchtmann, Randy Gelfert +3 more
similarity 0.42
Abstract · 6 pages, 8 figures; submitted to IEEE ICC for review; Alexander Wietfeld and Luiz C. P. Wille contributed equally to this work

Future molecular communication (MC) networks are envisioned to use the human cardiovascular system as a channel. Disease-related changes affect particle transport, allowing an MC receiver to also act as a sensor. In this work, we investigate plaque formation in a carotid bifurcation through a systematic fluid-dynamics simulation study with non-Newtonian blood rheology. We analyze how plaque geometry changes branch-specific particle reception and timing, and use these observations to estimate plaque-induced channel obstruction. At an illustrative reference of only 128 emitted particles, a 250 ms observation window and 50 ms temporal resolution, a Ridge detector estimates maximum local channel-width reduction with a mean absolute error of 8.30 percentage points. We evaluate robustness across system constraints like particle budgets, observation windows, branch access, detection efficiency, count resolution, and synchronization. Coarse counting has little effect when timing features remain available, whereas limited temporal resolution and clock uncertainty substantially affect short-window estimates. Extending the observation window to 1 s reduces these timing-related penalties. The results establish a baseline for plaque sensing from constrained MC observations and identify receiver capabilities relevant to the Internet of Bio-Nano Things.

0.28

Analytical Modeling of Open- and Closed-Loop Dispersive Molecular Communication Channels with Pulsatile Flow

cs.ET physics.flu-dyn ·2026-10-07 ·Theofilos Symeonidis, Fardad Vakilipoor, Timo Jakumeit, Robert Schober, Nunzio Tuccitto +1 more
published similarity 0.42
Abstract · 15 pages, 8 figures. This paper substantially extends the preliminary version presented at the 13th ACM International Conference on Nanoscal…

Molecular communication (MC) is a communication paradigm in which information is conveyed through the release, propagation, and reception of molecules. Many envisioned healthcare applications of MC are expected to operate inside the human body, where the cardiovascular system (CVS) may serve as the physical propagation environment and molecular transport is governed by diffusion and blood flow. Although blood flow is inherently pulsatile, most analytical MC channel models assume steady flow. In this paper, we develop a time-variant analytical model for dispersive MC channels with pulsatile flow. We derive the straight-duct response as a Normal distribution with time-variant mean and variance, capturing the combined effects of diffusion and pulsatile flow, and extend it to closed-loop channels through a wrapped-Normal representation. The model is validated against three-dimensional (3D) particle-based simulations (PBSs) for synthetic and physiologically motivated velocity waveforms. We further derive a closed-form first-order approximation for the first-arrival peak time and introduce the nondimensional indicator $S_{\mathrm{Rx}}$ for assessing the applicability of the reduced one-dimensional (1D) model. Our results show that pulsatility has the strongest influence when molecular transport is predominantly advective and the temporal flow variations are not averaged out, whereas stronger diffusion and faster pulsations reduce its impact on the received signal. Moreover, a PBS-based parameter sweep supports $S_{\mathrm{Rx}} \ge 2$ as a practical criterion for the applicability of the proposed analytical model. Finally, relating the analytical assumptions to representative blood-vessel classes shows that model applicability depends not only on the transport conditions but also on physiological properties such as vessel rigidity, geometric uniformity, and blood rheology.

0.39

MPISuperRes-PnP: A Super-Resolution Zero-Shot Plug-and-Play Reconstruction Algorithm for Magnetic Particle Imaging

cs.CV ·2026-08-10 ·Vladyslav Gapyak, Thomas März, Andreas Weinmann
published similarity 0.41
Abstract · 19 pages, 8 tables

Magnetic Particle Imaging (MPI) is an emerging medical imaging modality. MPI is based on the non-linear response of magnetic nanoparticles to an applied magnetic field and avoids ionizing radiation. The measured signal is the voltage induced in receive coils by the particles' response. Reconstructing the particle concentration from the signal constitutes the imaging task. Even using state-of-the-art measurement-based reconstruction, the associated spatial grid is very coarse, hence super-resolution (SR) techniques are important. In this work, we propose an approach for SR in MPI inspired by energy minimization. Different methods have been proposed for SR in MPI, ranging from upscaling of the associated system matrix to interpolation of the reconstruction. Here we incorporate SR into the reconstruction task via an energy minimization formulation. Following the plug-and-play approach to energy minimization we derive a splitting scheme and a SR method for MPI where the arising Gaussian denoising task is treated with a pre-trained learned Gaussian denoiser in a zero-shot fashion. This way, we incorporate benefits of deep learning without training and avoid the need of training data. Further, we provide a quantitative and qualitative evaluation of the proposed method. Hyper-parameter are selected via an extended parameter search. The found parameters are applied for reconstruction on real data. We show the applicability of our method on synthetic and on real data (MPIData: EquilibriumModelWithAnisotropy and 2D-OpenMPI Data). The proposed method employs a deep-learning denoiser without training -- thus it does not require presently scarcely available MPI training data. The denoiser behaves conservatively, i.e., no hallucination artifacts were observed. The SR approach is generic such that it can be applied in future MPI contexts involving different regularizers or different imaging tasks.

0.28

A Bifurcation-Based Domain Decomposition Method with Neural Operators for Blood Flow Simulation

cs.CE physics.comp-ph ·2026-09-29 ·Yuzhou Zhao, Han Zhang, J. Matias Di Martino, Jean-Michel Morel, Guillermo Sapiro
published similarity 0.41
Abstract · Accepted for publication in Multiscale Modeling & Simulation (SIAM)

Fast and accurate simulation of hemodynamic behavior within vascular networks is essential for numerous clinical applications. However, obtaining high-quality and computationally efficient flow measurements across complex vascular networks remains challenging. To address this, we first decompose the vascular network into a set of bifurcation units and then develop an operator network capable of mapping unit-specific parameters to the local solution fields of each bifurcation unit. By lumping the Windkessel-model outlet parameters and incorporating inlet boundary conditions from the solution of parent units, the flow and pressure fields can be rapidly approximated. Subsequently, operator-network-driven Schwarz waveform relaxation is applied across bifurcation units to correct discontinuities and improve numerical accuracy. On 7-segment and 55-segment arterial tree models, the proposed method achieves $13\times$ to $17\times$ wall-clock speedups over conventional 1D numerical simulation, with relative $L^2$ errors of 1% in both pressure and velocity. The resulting pulse wave velocity biomarkers agree with the conventional reference to within 1--2%, and the same trained operator generalizes to different tree-like 1D vascular network topologies.

0.25

Multi-Fidelity Particle Flow Filters based on Log Homotopy

cs.CE math.NA ·2026-10-26 ·Abhinab Bhattacharjee, Andrey A. Popov, Amit N. Subrahmanya, Adrian Sandu
similarity 0.39
Abstract

This work proposes a new Multi-Fidelity Particle Flow Filter (MFPFF) based on a linear control variate framework and multilevel Monte Carlo methods. Conventional particle filters often suffer from weight collapse and particle degeneracy in high-dimensional spaces. Particle flow filters address this by smoothly transporting prior particles toward the posterior distribution, thereby avoiding the need for resampling. This work constructs multi-fidelity particle flow filters by augmenting a small number of expensive high-fidelity particles (full-order model runs) with a large number of inexpensive low-resolution particles (reduced-order surrogates constructed via intrusive Galerkin projection). These surrogates act as control variates to enhance the statistical estimate of the full-order posterior, yielding enhanced analysis accuracy at comparable computational cost. The work focuses on two particle flows based on log homotopy, the stochastic Gromov flow and deterministic Exact flow. Numerical experiments with the Korteweg-De Vries (KdV) and Quasi-Geostrophic (QG) test problems demonstrate that the proposed MFPFF achieves accuracy comparable to high-fidelity simulations while significantly reducing computational expense.

0.29

Generating Accurate Microstructures of Anisotropic Magnetorheological Elastomers

cs.CE ·2026-10-14 ·Heinrich T. Roth, Lukas Jabs, Matti Schneider, Konstantin Gerstenberger, Günter K. Auernhammer +2 more
similarity 0.39
Abstract

Anisotropic magnetorheological elastomers are magnetoactive smart materials whose complex magneto-mechanical behavior is strongly influenced by their underlying microstructure. Efficient and accurate multiscale simulations of these materials rely on small unit cells that reproduce the behavior of the real material. In this work, we present a framework for the generation and validation of such two-dimensional representative volume elements (RVEs) from a given microstructure image, assuming circular particles. The cells are generated through an optimization procedure where the two-point correlation function serves as a differentiable descriptor, while a minimum inter-particle distance is enforced as a constraint. To assess the equivalence of the generated cells, we compare their effective magneto-mechanical response with those of the reference microstructure. We demonstrate that the generated cells reproduce the reference response with high accuracy, also with substantially fewer particles. Consequently, the computational cost of subsequent multiscale simulations is reduced.

0.26

CraftSPH: A composable framework for differentiable smoothed particle hydrodynamics implemented in PyTorch

cs.LG physics.flu-dynmath.NA ·2026-09-24 ·Gen Matono, Shujiro Fujioka, Mayuko Nishio
code/data similarity 0.39
Abstract · The code is publicly available at https://github.com/GenMNL/CraftSPH 43 pages, 14 figures

Smoothed particle hydrodynamics (SPH) is well suited to large-deformation fluid problems, and the growing use of automatic differentiation in engineering applications has motivated interest in differentiable SPH solvers. In this study, a composable differentiable SPH framework, CraftSPH, has been developed. In CraftSPH, major computational operations are implemented as independent modules that users can combine to construct solvers for different purposes. This design supports high-accuracy discretization and both explicit and implicit computation within a common framework, while allowing individual components to be maintained and extended. Selected numerical operations also support automatic differentiation (AD) for physical-parameter estimation and potential coupling with deep learning models. These capabilities were demonstrated through forward and inverse analyses. Forward analyses using an implicit SPH scheme with high-accuracy discretization showed good agreement with analytical and reference solutions for Poiseuille flow and a rising bubble, while capturing the key experimental trends in two- and three-dimensional dam-break problems. In inverse analyses, explicit and implicit SPH schemes were used to estimate kinematic viscosity in Taylor-Green vortex flow and Reynolds number in lid-driven cavity flow. The results also showed that the choice of operations included in the computational graph affects the computed gradients. Together, these findings demonstrate that CraftSPH enables users to assemble problem-specific solvers for forward and inverse analyses within a common framework.

0.47

A Lagrangian View of Flow Matching

cs.CV physics.flu-dyn ·2026-08-31 ·Peyman Milanfar
similarity 0.38
Abstract

Modern explicit-time generative models, such as Flow Matching [Lipman et al., 2023] and Rectified Flow [Liu et al., 2023], are typically derived top-down via Optimal Transport and the continuity equation. This standard Eulerian approach focuses on the macroscopic transport of probability mass. In this paper, we present an alternative, bottom-up mechanical derivation grounded in a Lagrangian (particle-centric) perspective. By analyzing the local Taylor expansion of a continuous denoiser, we motivate a strict invariance condition required for optimal, singlestep generation: the conservation of target identity. Enforcing this condition yields a governing quasi-linear advection Partial Differential Equation (PDE). We demonstrate that solving this PDE via the Method of Characteristics analytically yields the straight-line trajectories of Flow Matching. This geometric perspective isolates the Jacobian of the denoiser as the primary source of trajectory curvature, providing a direct mathematical explanation for why straight-line flows enable massive step sizes, and why empirical models require distillation to flatten intersecting characteristics.

0.25