CS Paper Radar

Optimization-Based Path Planning for Industrial Manipulators: Experimental Validation in Additive Manufacturing

Shiva Ganesh Murali, Valentin Bhend, Deepak Ingole, Gabriele Fadini, Alisa Rupenyan

cs.RO math.OC ·submitted 2026-11-10 12:25 UTC · v1

Abstract

Robotic additive manufacturing requires joint paths that reconcile robot feasibility with process-specific geometry. We develop an offline optimization-based path planner that combines joint-path regularity and self-collision penalties with process costs and constraints, so that a new process enters through its own reference, residuals, and tolerances. Full-path and boundary-coupled chunked optimization handle references of different lengths. Iterative Weight Tuning (IWT) determines the cost weights from the gaps between Key Performance Indicators (KPIs) and their targets. In carbon-fiber winding and robotic 3D printing, the planned paths meet the geometric tolerances and all KPI targets, and both paths are executed on a UR10e, without extrusion for printing, with joint-level tracking recorded during execution.

Comment
Submitted for the review in ECC 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Kinematics-Grounded Agentic AI for Robotic Additive Manufacturing Process Planning

cs.RO cs.AIeess.SY ·2026-09-16 ·Jingzhan Ge, Ruimin Chen, Azadeh Haghighi, Jiong Tang, Farhad Imani
similarity 0.71
Abstract · 25 pages, 17 figures

Robotic additive manufacturing (AM) extends material-extrusion printing beyond gantry kinematics but makes process planning robot-dependent. A slicer-generated plan that appears favorable in part coordinates can become infeasible or robotically unfavorable on a manipulator because slicer-process decisions and part orientation determine the generated path, while part orientation and workspace placement affect its kinematic realization. Existing AM tools, large language model (LLM)-based decision-support methods, and digital-shadow systems do not provide integrated pre-execution evaluation of these coupled decisions. This paper presents agentic robotic additive manufacturing (A-RAM), an agent-specialist-tool framework that converts user intent and a part file into traceable, execution-ready plans. The LLM interprets manufacturing objectives and constraints, identifies prescribed and searchable planning variables, and encodes this reasoning in a schema-constrained request; a deterministic Planning Agent instantiates the corresponding search workflow, while domain tools compute quantitative evidence for slicing, placement, inverse kinematics, trajectory timing, Joint-6 jerk, and extrusion. The framework is evaluated on a six-axis robotic-arm AM cell through three case studies covering expert-specified planning, goal-only planning, objective-dependent infill screening, and geometry-dependent orientation-placement selection. Across the evaluated candidate sets, selected plans achieve up to 53.5% lower maximum Joint-6 jerk and 48.3% lower mean absolute Joint-6 jerk than the least favorable valid candidates, while objective-specific infill screening yields motion-plan completion times up to 40.1% shorter and extrusion paths up to 12.7% shorter than the corresponding least favorable screened patterns.

0.15

Robot Aware Computational Design of Object Specific Passive Grippers for Additive Manufacturing

cs.RO ·2026-09-03 ·Abdullah Yahya Abdullah Omaisan, Ibrahim Sheikh Mohamed
similarity 0.62
Abstract

This paper presents an end-to-end computational pipeline that converts a selected object mesh, a measured object state, and a selected six-axis robot into an object-specific, unactuated, additively manufacturable gripper. The method couples exact-mesh RGB-D/ICP pose registration, deterministic surface-contact sampling, uncertainty-aware wrench screening, selection among six passive capture mechanisms, object-conformal surface synthesis, full-orientation robot inverse kinematics, a swept-volume-aware manufacturing domain, directional fused-deposition finite-element screening, and constrained three-dimensional SIMP topology optimization. Unlike workflows that treat grasp selection, tool geometry, motion, and structural design as separate problems, every exported design is bound to the source mesh, object pose, robot flange, contact set, and insertion hypothesis by a traceable design identifier. We derive the implemented registration, contact, fit-tolerance, finite-element, and density-optimization equations and prove three properties of the numerical construction: nodal load preservation, monotonic compliance sensitivity under SIMP interpolation, and voxel-domain containment after topology post-processing. Four archived object-specific attempts - a rabbit, camera flange, 3DBenchy, and faceted bust - meet the nominal fit, uncertain-wrench, runtime-sweep, and baseline/post-topology FEA gates. A deliberately enlarged +/-3 mm, +/-5 degree pose stress check differentiates the designs, retaining 29-134 of 160 simulated trials. Their reconstructed topologies retain 92.0-97.6% of the FE domain because functional regions are protected. Archived robot photographs show the corresponding printed assemblies qualitatively, while nominal material properties and absent coupon-calibrated, instrumented tests keep all four at digital-screening status rather than operational release.

0.25

LIBERO-Industry: Benchmarking Robotic Manipulation under Industrial Process Constraints

cs.AI ·2026-10-12 ·Ming Shin Cindy Sung, Duan Leijiahao, Haoxiang Wang, Boning Tan, Liangna Fu +7 more
benchmark similarity 0.59
Abstract · 38 pages, 14 figures, 20 tables, including appendices. Project website: https://IAIE-PhysicalAI.github.io/LIBERO-Industry/

Industrial manipulation in flexible manufacturing, e.g., high-mix, low-volume (HMLV) electronics assembly, requires robot policies to adapt to changing products and production conditions. Such settings impose industrial process constraints, including product variants, moving material flows, finite execution windows, and tight geometric tolerances. However, existing evaluation frameworks do not systematically capture these constraints when assessing generalist robot policies. To address this gap, we introduce LIBERO-Industry, a novel benchmark built on the widely used robot learning benchmark LIBERO, that translates the aforementioned industrial constraints into controllable task conditions and measurable success criteria. Specifically, LIBERO-Industry comprises three classic task scenarios: Static-to-Dynamic (S2D) loading, Dynamic-to-Static (D2S) unloading, and Dynamic-to-Dynamic (D2D) transfer. The suites contain 216 tasks in total that systematically vary object geometry, conveyor speed, interaction-window duration, and geometric acceptance region size. Extensive experiments across five generalist robot policies (including vision-language-action models and world-action models) show that performance progressively degrades as industrial constraints are introduced and combined. Under a shared fine-tuning and evaluation protocol, the LIBERO-Industry co-training condition achieved higher observed target-transfer completion than the original-LIBERO condition.

0.35

Robot Tool Design from Scratch via Behavior-Aware Hierarchical Optimization

cs.RO ·2026-09-28 ·Yinghan Chen, Xiyao Tian, Yizan Dai, Yuyang Li, Yixin Zhu
similarity 0.58
Abstract

The ability to design a tool for a task marks a level of intelligence beyond merely understanding, selecting, or using one. Existing methods for robotic tool design typically optimize a tool's continuous shape and action within a structure that is prescribed or generated beforehand, so the structure itself stays outside the physical optimization loop. We study task-driven tool design from scratch, where tool structure, shape, and action are all derived from the desired physical outcome. Here we show that the three elements can be designed jointly by HOT, a hierarchical optimization whose upper level searches over discrete tool structures with BASS, while lower-level physical optimization evaluates their task behavior and returns milestone progress as behavioral evidence for the search, ultimately providing jointly optimized shape and action. On four tool-use tasks with distinct physical functions, HOT discovers functional structures after evaluating only a small fraction of search spaces containing up to 56 million structures, and the subsequent refinement of their geometry lowers the task loss on all tasks while preserving success, through deformations that are functionally interpretable. Once 3D printed, the tools accomplish all tasks on a real robot with the actions found in simulation. Designing tools from required physical effects, rather than a catalog of known tools, is a step toward the open-ended tool making seen in humans and animals.

0.23

Multi-Group Pipe Routing under Permanent Geometric Occupancy: Problem, Benchmark, and Classical Baselines

cs.RO ·2026-08-27 ·Deng Quan
benchmark similarity 0.58
Abstract

Additive manufacturing (AM) enables compact hydraulic components whose internal fluid channels can follow free-form 3D paths rather than conventionally drilled holes. A representative case is multi-group channel layout in rotary direct-drive servo valves: once a channel is placed it permanently occupies volume, so later channels must clear earlier geometry--unlike classical multi-agent pathfinding (MAPF), where agents free space after moving. We study this setting as multi-group pipe routing under permanent geometric occupancy. Our contributions are a problem formalization with geometric dual-witness conflicts, a constructive 3D benchmark (two corridor generators x two obstacle painters, controlled difficulty, feasibility witnesses), and baseline results for CBS, PBS, and priority planning adapted to this coupling. We evaluate by success rate under a fixed time budget. PlaneSlice hard instances clearly rank CBS above PBS and PP, while easier cells validate the pipeline. The goal is a reproducible problem definition, suite, and classical baselines--not a new optimal MAPF algorithm.

0.50

Peg-in-Bench: A Modular Benchmark for High-Precision Robotic Insertion

cs.RO ·2026-09-01 ·Yosel Delgado, José G. Buenaventura-Carreón, Floris Erich, Roman Mykhailyshyn, Tomohiro Motoda +2 more
benchmarkcode/data similarity 0.58
Abstract · 6 pages, 5 figures

High-precision insertion remains a fundamental challenge in robotic manipulation due to the strict alignment requirements and contact-rich interactions involved. Although peg-in-hole tasks are widely used for evaluation, existing bench- marks often rely on fixed task configurations, limiting their ability to assess robustness and generalization across different insertion scenarios. This paper introduces a reconfigurable peg-in-hole benchmark designed to evaluate task generalization in high-precision insertion. The benchmark consists of a set of fully 3D-printable modular components, including multiple peg geometries, tolerance levels, and configurable base structures that can be combined to generate a large variety of insertion and assembly tasks. By varying object layouts, orientations, and task structures while maintaining controlled physical conditions, the benchmark enables systematic evaluation of adaptation to unseen scenarios. To support reproducibility, we additionally provide a scenario generation tool capable of producing standardized task configurations and machine-readable task descriptions. The scenario generation tool and the STL files of the benchmark pieces are available through the project repository: https://github.com/aistairc/peg-in-bench.

0.49

A Physics-Based Closed-Loop Robotic Bioprinting Framework Towards Volumetric Muscle Loss Treatment

cs.RO ·2026-09-10 ·Omid Rezayof, Jerin T. Andrews, Ehsan Zobeidi, Ali Ghasemkhani, Meenakshi Kamaraj +3 more
published similarity 0.58
Abstract · This paper has been accepted for publication and presentation in 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (I…

Robotic bioprinting and Direct Ink Writing (DIW) are being explored towards the treatment of Volumetric Muscle Loss (VML). While previous studies have shown the importance of proper parameter selection on the print outcome, existing approaches often rely on time- and material-intensive design of experiments methods, or require large, well-curated datasets for training machine learning models. In this paper, we propose a physics-based closed-loop robotic bioprinting system capable of near real-time parameter adaptation. The system integrates a 3D point cloud camera and fully autonomous vision-based algorithms to provide quantitative evaluation of printed constructs. This evaluation is fed into a controller that adjusts printing parameters to achieve a desired bead thickness. To assess the framework's performance, four experimental configurations were tested, each repeated three times. In these tests, printing began from an arbitrary initial parameter value, and the controller was tasked with adjusting the parameters to reach the desired thickness. The system converged in all trials, achieving a tracking error below 0.5 mm within an average of 5.2 seconds from the start of printing. The low standard deviation of the converged pressure over different tests (0.04 bar on average) demonstrates robustness and repeatability. Additional experiments were conducted with the controller turned off, enabling direct comparison with open-loop DIW bioprinting, further confirming the effectiveness of the proposed closed-loop framework in achieving the desired bead geometry.

0.42

PccDiffuser: Multi-solution Motion Planning for Continuum Robots

cs.RO ·2026-09-09 ·Ke Qiu, Sifan Chen, Si Wang, Rong Xiong, Yue Wang +1 more
hot direction similarity 0.57
Abstract · 8 pages, 8 figures, 1 video

We present the PccDiffuser, a conditional diffusion framework for continuum robots that learns a multimodal distribution over complete configuration-space paths and samples multiple candidate solutions in parallel, which are subsequently converted into an executable trajectory by time allocation considering actuator constraints. Under the piecewise constant-curvature model, we use exponential co-ordinates to describe the robot kinematics, and use graph neural network to encode a variable number of environment obstacles. Analytical differential kinematics is incorporated in the denoising process to improve terminal accuracy and whole-body clearance. On a mixed test set comprising workspace with zero to four obstacles, PccDiffuser achieved a success rate of 91\%. Compared with existing sampling- and optimisation-based benchmarks, it delivered both a higher success rate and greater computational efficiency, with the latter advantage becoming more substantial when sampling more candidate solutions. Experiments on a three-section tendon-driven continuum robot further demonstrate consecutive planning, multi-solution planning, and whole-body obstacle avoidance.

0.35