CS Paper Radar

Set-Theoretic PAPR Reduction in Multi-Antenna Systems

Jochen Fink, Renato L. G. Cavalcante, Sławomir Stańczak

eess.SP ·submitted 2026-11-11 14:44 UTC · v1

Abstract

In this study, we propose an optimization framework for PAPR reduction in multi-antenna systems with beamforming. Unlike previous techniques, the proposed approach permits full control over the distorted symbol constellation via arbitrary (convex) constraints on the frequency domain symbols, while minimizing the PAPR at each individual transmit antenna. We propose an iterative algorithm based on an extrapolated alternating projection method, which relies on an iterative soft-thresholding subroutine to compute projections onto sublevel sets of the objective function, and we compare its performance to optimal solutions obtained with general-purpose convex solvers.

Comment
Submitted to IEEE WCNC 2027 for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Transmit Beamformer Design for Beampattern Synthesis in Phased-Array Radar Systems

eess.SP ·2026-08-21 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
similarity 0.61
Abstract

This paper presents a phased-array transmit beamformer design for beampattern matching and interference suppression. We propose an optimization framework jointly addressing these two objectives. The resulting non-convex problem is solved via alternating minimization, where each subproblem admits a closed-form solution, one of which recovers the classical maximum-gain and null-steering phased-array beamformers. To design an algorithm ensuring theoretical convergence guarantees, the beamformer design is then reformulated as a non-convex set feasibility problem, closely related to the original formulation. This problem is addressed using a provably convergent projected gradient descent method and further enhanced with acceleration techniques that substantially improve empirical convergence. Extensive simulations validate the excellent performance and computational efficiency of the proposed method.

0.26

Beyond the Pseudo-Inverse: GIM Precoding for Per-Antenna Power Minimisation in MU-MIMO

eess.SP ·2026-11-06 ·Hernan X. Cordova
theory similarity 0.58
Abstract

We study linear precoder design for multi-user MIMO downlink under per-antenna power constraints (PAPC), which arise naturally when each antenna port has its own power amplifier. While the Moore-Penrose pseudo-inverse is the unique optimal generalized inverse for zero-forcing precoding under a total power constraint [1], we prove this optimality does not extend to the MMSE/RZF case under PAPC. Any precoder in the Generalized Inverse Matrix (GIM) family shares the same effective channel and per-user SINRs as the pseudo-inverse baseline, while its null-space component reshapes the per-antenna power profile. This separation principle enables minimising peak per-antenna power at fixed SINR targets with zero SINR penalty. We characterise the convex peak-power problem over this family and its active-set optimality, establish MRT and ZF asymptotic limits, and provide a convergent first-order subgradient algorithm. Simulations with 8-64 antennas confirm gains of 1.9-3.7 dB over pseudo-inverse RZF, with GIM-MMSE eliminating essentially all PAPC violations up to 20% per-antenna budget imbalance. The framework applies directly to fully-digital massive MIMO. Cell-free and hybrid analog-digital arrays are promising extensions.

0.34

Broadcasting in Centimeter-Wave Gigantic MIMO Systems: Beam Shaping is All You Need

cs.IT ·2026-10-21 ·Boyu Ning, Yike Xie, Jaebum Park, Songjie Yang, Weidong Mei +2 more
top venue similarity 0.56
Abstract

Beamforming is a key enabling technology for centimeter-wave Gigantic MIMO (G-MIMO) systems, using antenna arrays to generate wide beams for cell-wide broadcasting or narrow beams for data transmission. This paper presents a novel \emph{beam shaping technology} for designing environment-aware broadcast beams (i.e., beams for common control information delivery, as in 5G SSB). As a case study, we shape a \emph{prostrate beam} in the vertical plane to approximate uniform electromagnetic power distribution across the ground, thereby enhancing broadcast coverage quality. We first propose a geometric broadcasting model that, through coordinate transformation, relates base station height, beam spread, maximum service distance, and downtilt angle. Building on this model and the signal propagation model, we formulate the beam shaping problem as a non-convex optimization problem that aims to maximize ground-level coverage. To solve it, we develop a generalized optimization framework. We reformulate the problem into a matrix representation, equivalently transforming it into a target pursuit optimization (TPO) problem. Using variable substitution, the objective is convexified into a quadratically constrained quadratic program, and the non-convex rank constraint is handled via successive convex approximation, decomposing the problem into iteratively solved subproblems. We provide complexity and convergence analyses for the proposed algorithm. Numerical simulations confirm that the optimization effectively shapes the intended beam pattern and that the proposed prostrate beam yields significant performance gains, including substantially extended coverage distance, over conventional wide-beam benchmarks.

0.59

Hardware Impairment Parameter Estimation in Fluid Antenna Systems by Inverse Optimization

eess.SP ·2026-11-17 ·Songling Zhang, Zhaohui Yang, Ruopeng Xu, Hao Xu, Xusheng Zhu +2 more
published similarity 0.56
Abstract · Accepted by IEEE GLOBECOM 2026

In this paper, the problem of estimating the hardware impairment parameters of fluid antennas (FAs) in a multi-base station (BS) multi-user communication system is studied. The actual hardware coefficients are unknown, whereas the FA positions and transmit beamforming vectors adopted by the BSs are known. We first formulate a forward spectral efficiency (SE) maximization problem and introduce aggregate interference variables whose consistency with the physical inter-cell interference can be maintained through a pricing mechanism. For inverse estimation, the aggregate interference is obtained from receiver-side interference measurements associated with the observed network decisions. We then construct a trust-region linear model of the position-update problem around the observed FA positions. To extend the applicability of the proposed framework to antenna positions obtained from inexact or heuristic algorithms, we develop an inverse optimization model with an explicit duality-gap tolerance, which is solved using sequential quadratic programming (SQP). Simulation results show that the proposed scheme attains a lower estimation error than KKT residual minimization (KKT-RM) at both considered transmit-power levels and improves the SE by up to 22.86% over the Ideal-hardware-assumption scheme.

0.45

Structure-Exploiting ADMM for Low-Complexity Finite-Blocklength Beamforming in Cellular IoT Networks

eess.SP ·2026-10-11 ·Asim Ihsan, Muhammad Asif, Ali Arshad Nasir, Wali Ullah Khan, Galymzhan Nauryzbayev +1 more
benchmark similarity 0.55
Abstract · 14 pages, 8 figures. Submitted to IEEE

Ultra-reliable and low-latency communication (URLLC) is essential for mission-critical cellular Internet of Things (IoT) applications requiring reliable short-packet transmission and efficient radio-resource allocation. However, finite-blocklength (FBL)-aware beamforming becomes computationally demanding as the numbers of users and antennas increase. Existing successive convex approximation (SCA) methods typically rely on general-purpose convex solvers without exploiting the structure of the resulting beamforming problem. This paper develops a structure-exploiting consensus alternating direction method of multipliers (ADMM) framework for low-complexity FBL-aware beamforming in downlink multi-user multiple-input single-output (MU-MISO) cellular IoT networks. The FBL sum rate is maximized subject to transmit-power and per-user minimum-rate constraints. Each SCA iteration yields a convex quadratically constrained quadratic program (QCQP), reformulated into an equivalent consensus problem. For an M-antenna base station serving N IoT nodes, the global update exploits Kronecker structure to replace an MN-by-MN factorization with a shared M-by-M factorization, while rank-one channel matrices enable low-complexity local projections. CVX-SCA serves as a general-purpose benchmark, whereas standard ADMM-SCA isolates the gains from structural exploitation. Numerical results demonstrate close agreement with CVX-SCA in objective value, feasibility, and convergence. Under user scaling, the proposed method achieves more than 4-fold end-to-end speedup over CVX-SCA and approximately 6-fold per-iteration speedup over standard ADMM-SCA, demonstrating its computational efficiency for cellular IoT resource allocation.

0.22

Beamforming and Filter Design for Bistatic ISAC under Known and Unknown Transmit Symbols

eess.SP ·2026-08-17 ·Mohammad Hatami, Nhan Thanh Nguyen, Markku Juntti
publishedbenchmark similarity 0.54
Abstract · 5 pages, 3 figures. Accepted for presentation at the IEEE SPAWC 2026 conference

This paper investigates the joint design of beamforming and radar receive filters in a multiuser bistatic integrated sensing and communications (ISAC) system, aiming to maximize the minimum radar signal-to-interference-plus-noise ratio (SINR) under communications SINR and transmit power constraints. We consider two scenarios: transmitted signals are either known or unknown at the radar receiver. We develop tractable solutions to the resulting non-convex optimization problems in both cases. For the known-signal case, we derive closed-form radar receive filters and iteratively design beamforming using fractional programming (FP) and successive convex approximation (SCA). For the unknown case, we adopt an alternating optimization (AO) approach to jointly design the beamforming and receive filters. Numerical results demonstrate that, while both approaches achieve comparable performance under per-slot optimization, knowledge of the transmitted symbols provides significant gains in multi-slot processing via coherent integration. Moreover, the proposed ISAC designs perform close to the radar-only benchmark under moderate communication requirements.

0.56

Movable-Element STARS-Assisted NOMA Communications

eess.SP ·2026-09-25 ·Jingjing Zhao, Yiheng Zhang, Kaiquan Cai, Xidong Mu, Yuanwei Liu
similarity 0.54
Abstract

This paper proposes a movable-element (ME) enabled simultaneously transmitting and reflecting surface (ME-STARS)-assisted non-orthogonal multiple access (NOMA) communication system, where the positions of STARS elements can be flexibly reconfigured to introduce additional spatial degrees-of-freedom. Our objective is to maximize the sum achievable rate by jointly optimizing the active beamforming at the base station (BS) as well as the passive beamforming and MEs positions at the STARS. To tackle the resultant highly-coupled non-convex optimization problem, an alternating optimization-based algorithm is proposed, in which the original problem is decomposed into three subproblems. For the BS and ME-STARS beamforming subproblems, the successive convex approximation method is employed. For the MEs positions optimization, penalty terms are incorporated into the objective function to handle the constraints, thereby transforming the original problem into an unconstrained formulation. The gradient descent algorithm is subsequently applied to iteratively approach the sub-optimal solution. Numerical results demonstrate that: i) ME-STARS-assisted NOMA communications achieve superior performance compared to the NOMA communications assisted by STARS with fixed-position elements; and ii) the performance gain brought by the MEs is significant even with restricted moving region size.

0.04

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.54
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24