CS Paper Radar

Broadcasting in Centimeter-Wave Gigantic MIMO Systems: Beam Shaping is All You Need

Boyu Ning, Yike Xie, Jaebum Park, Songjie Yang, Weidong Mei, Emil Björnson, Robert W. Heath

cs.IT ·submitted 2026-10-21 10:29 UTC · v1
top venue

Abstract

Beamforming is a key enabling technology for centimeter-wave Gigantic MIMO (G-MIMO) systems, using antenna arrays to generate wide beams for cell-wide broadcasting or narrow beams for data transmission. This paper presents a novel \emph{beam shaping technology} for designing environment-aware broadcast beams (i.e., beams for common control information delivery, as in 5G SSB). As a case study, we shape a \emph{prostrate beam} in the vertical plane to approximate uniform electromagnetic power distribution across the ground, thereby enhancing broadcast coverage quality. We first propose a geometric broadcasting model that, through coordinate transformation, relates base station height, beam spread, maximum service distance, and downtilt angle. Building on this model and the signal propagation model, we formulate the beam shaping problem as a non-convex optimization problem that aims to maximize ground-level coverage. To solve it, we develop a generalized optimization framework. We reformulate the problem into a matrix representation, equivalently transforming it into a target pursuit optimization (TPO) problem. Using variable substitution, the objective is convexified into a quadratically constrained quadratic program, and the non-convex rank constraint is handled via successive convex approximation, decomposing the problem into iteratively solved subproblems. We provide complexity and convergence analyses for the proposed algorithm. Numerical simulations confirm that the optimization effectively shapes the intended beam pattern and that the proposed prostrate beam yields significant performance gains, including substantially extended coverage distance, over conventional wide-beam benchmarks.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Guided Bayesian Optimization for High-Dimensional Mixed-Variable MIMO Base Station Design

eess.SP cs.NI ·2026-10-01 ·Koki Kanzaki, Koya Sato
similarity 0.65
Abstract · 6 pages, 4 figures. This work has been submitted to the IEEE for possible publication

This paper proposes a physics-guided Bayesian optimization for high-dimensional mixed-variable multiple-input and multiple-output (MIMO) base station (BS) design. The considered problem jointly selects a subset of candidate sites for BS deployment and optimizes the azimuth angles, downtilt angles, and transmit power spectral densities of the BSs, while each configuration is evaluated using computationally expensive site-specific ray tracing. To efficiently optimize the system configuration, the proposed method constructs a low-cost physics-based proxy from precomputed propagation information. The proxy-estimated communication coverage is used as the Gaussian process (GP) prior mean, and a residual GP with three-dimensional physical features learns the discrepancy between the proxy and full evaluations. Ray-tracing-based evaluations in two urban scenarios show that the proposed method achieves up to approximately 15 percentage points higher coverage than conventional and high-dimensional optimization baselines under the same evaluation budget.

0.28

Non-Uniform Antenna Array Design with Large Inter-Element Spacing for Massive MIMO

eess.SP ·2026-09-07 ·Lin Chen, Qu Luo, Orestis Christogeorgos, Pei Xiao, Gabriele Gradoni +3 more
similarity 0.63
Abstract

In massive multiple-input multiple-output (MIMO) systems, uniform arrays are typically configured with inter-element spacing no greater than half a wavelength to avoid grating lobes and spatial aliasing. However, many emerging fifth- and sixth-generation (5G/6G) applications rely on distributed arrays whose inter-element spacing far exceeds half a wavelength. In this paper, we propose an electromagnetic mutual-information-theoretic (EMIT)-guided non-uniform array (NUA) design with large inter-element spacing for massive MIMO systems to address the grating lobes and spatial aliasing artifacts, and in the meantime, to reduce the hardware cost and energy consumption. We start by developing a multipath channel model for non-uniform planar arrays, and analyze the resulting channel characteristics in terms of inter-user interference, aperture efficiency, favorable propagation and channel capacity for the proposed typical NUA patterns. The model is further extended to wideband scenarios, where NUAs demonstrate improved robustness against beam squint due to their more compact element distribution. In addition, we introduce an EMIT approach to NUA design, which links the spatial sampling pattern of an antenna array to the capacity of the resulting MIMO channel. This gives rise to two complementary shaping strategies, amplitude tapering and geometric shaping, and their joint optimization. Numerical results demonstrate that the proposed NUAs significantly outperform conventional uniform arrays in aperture efficiency, channel orthogonality, beam squint mitigation, capacity, and error rate performance.

0.20

Near-Field Beamforming Design for Multi-IRS Wireless Beam Routing

eess.SP ·2026-10-07 ·Tao Wang, Changsheng You, Changchuan Yin
published similarity 0.62
Abstract · 5 pages, 3 figures, accepted by IEEE Communications Letters

This letter investigates efficient near-field beamforming designs for wireless communication systems aided by multiple extremely large-scale intelligent reflecting surfaces (Multi-XL-IRSs). Previous studies have mostly assumed far-field channel conditions, based on which angle-based beamforming is adopted for the base station (BS) and IRSs. However, this approach may lead to degraded performance in practical near-field scenarios. To address this issue, we consider near-field channel modeling and formulate an optimization problem aimed at maximizing the received power at the user equipment (UE) by jointly optimizing the beamforming at the BS and IRSs. Given the intractability under the beam training (BT)-based communication framework, the problem is revisited and reformulated. Subsequently, an efficient algorithm based on alternating optimization (AO) is proposed to solve the reformulated problem. Numerical results demonstrate that, in typical setups, our AO-based beamforming designs provide over 170% and 20% received power gains over conventional angle-based beamforming and beam focusing, respectively. Furthermore, the power scaling law derived under far-field conditions no longer holds in near-field scenarios.

0.56

Near-Field Dual-UPA Communications: A Generalized Geometric Approach

eess.SP ·2026-08-26 ·Li Zheng, Xing Hao, Ziru Chen, Yong Liu, Li Chen +1 more
published similarity 0.61
Abstract · This paper is accepted by IEEE globecom 2026

This paper investigates a near-field (NF) multiple-input multiple-output (MIMO) communication system equipped with dual uniform planar arrays (UPAs). We first develop a generalized geometric model to calculate the 3D distance between arbitrary antenna elements across the transmitter and receiver panels. Leveraging the distance analysis, we derive a closed-form near-field to far-field (NF-FF) boundary for dual-UPA configurations. By exploiting the geometric structure of the UPAs, we further decompose the near-field channel matrix into a Kronecker-product of two lower-dimensional matrices. This decomposition enables a low-complexity NF beamforming design for achievable-rate maximization. Numerical results validate the analysis and demonstrate that the conventional Rayleigh distance is a special case of the generalized model. Furthermore, the proposed beamforming design achieves near-optimal rate performance while significantly reducing the computational complexity compared to state-of-the-art NF beamforming methods.

0.21

Intelligent Reflecting Surface Deployment for Low-Altitude Coverage: Illumination Geometry, Directional Characteristics, and Optimization

cs.IT ·2026-08-31 ·Guoying Zhang, Qingqing Wu, Ailing Zheng, Xingxiang Peng, Wen Chen +1 more
theory similarity 0.60
Abstract · Submitted to an IEEE journal for possible publication

Terrestrial base stations (BSs) are typically configured with fixed downtilt to serve ground users, resulting in weak illumination of low-altitude airspace even under line-of-sight (LoS) propagation. In this paper, we establish a channel model that incorporates BS and intelligent reflecting surface (IRS) radiation patterns for three-dimensional (3D) low-altitude coverage while preserving the existing BS configuration. We formulate a budget-constrained IRS deployment problem that jointly determines candidate-site selection, IRS orientations, and phase shifts to maximize the worst-case signal-to-noise ratio (SNR) over the 3D low-altitude airspace. The selected sites and optimized IRS parameters remain fixed after deployment, yielding a quasi-static IRS configuration. We characterize the illumination geometry between the fixed-downtilt BS and rooftop candidates by deriving the nonnegative installation-height range satisfying the BS main-lobe condition. The separation between the mapped main-lobe height boundaries grows linearly with horizontal BS-to-site distance and decreases inversely with the number of BS antennas. We further derive an analytical lower bound on the regional worst-case normalized array gain achievable through IRS phase design over served directions with different direction spans. The resulting sufficient direction span decreases inversely with the square root of the number of IRS elements when the same worst-case normalized gain guarantee is maintained. We develop a mixed-integer alternating optimization (AO) algorithm to solve the resulting problem. Simulation results validate the analytical characterizations and show that the proposed scheme achieves higher worst-case SNR than benchmarks across different deployment budgets.

0.19

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.60
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

Structure-Exploiting ADMM for Low-Complexity Finite-Blocklength Beamforming in Cellular IoT Networks

eess.SP ·2026-10-11 ·Asim Ihsan, Muhammad Asif, Ali Arshad Nasir, Wali Ullah Khan, Galymzhan Nauryzbayev +1 more
benchmark similarity 0.60
Abstract · 14 pages, 8 figures. Submitted to IEEE

Ultra-reliable and low-latency communication (URLLC) is essential for mission-critical cellular Internet of Things (IoT) applications requiring reliable short-packet transmission and efficient radio-resource allocation. However, finite-blocklength (FBL)-aware beamforming becomes computationally demanding as the numbers of users and antennas increase. Existing successive convex approximation (SCA) methods typically rely on general-purpose convex solvers without exploiting the structure of the resulting beamforming problem. This paper develops a structure-exploiting consensus alternating direction method of multipliers (ADMM) framework for low-complexity FBL-aware beamforming in downlink multi-user multiple-input single-output (MU-MISO) cellular IoT networks. The FBL sum rate is maximized subject to transmit-power and per-user minimum-rate constraints. Each SCA iteration yields a convex quadratically constrained quadratic program (QCQP), reformulated into an equivalent consensus problem. For an M-antenna base station serving N IoT nodes, the global update exploits Kronecker structure to replace an MN-by-MN factorization with a shared M-by-M factorization, while rank-one channel matrices enable low-complexity local projections. CVX-SCA serves as a general-purpose benchmark, whereas standard ADMM-SCA isolates the gains from structural exploitation. Numerical results demonstrate close agreement with CVX-SCA in objective value, feasibility, and convergence. Under user scaling, the proposed method achieves more than 4-fold end-to-end speedup over CVX-SCA and approximately 6-fold per-iteration speedup over standard ADMM-SCA, demonstrating its computational efficiency for cellular IoT resource allocation.

0.22

A Smaller Subspace is All You Need: Efficient ISAC Beamforming via Dimensionality Reduction

eess.SP cs.IT ·2026-10-16 ·Ruiqi Liu, Yuanshuo Gang, Tianqi Mao, Qingqing Wu
similarity 0.60
Abstract · Submitted to an IEEE conference

Integrated sensing and communication (ISAC) has been recognized as a critical technology for the sixth generation (6G) wireless networks. Under monostatic sensing mode, achieving a balance between communication and sensing performance via optimal beamforming is a critical research problem. In multiple input multiple output (MIMO) systems, such beamforming problems are of substantial computational complexity due to the large number of antennas. Existing methods exploit exact subspaces of lower dimensions to speed up the beamforming process where the complexity is proportional to the number of communication users and sensing targets instead of antennas. In this paper, it is demonstrated that the beamforming problem can be solved in an even lower-dimensional subspace with only a small sensing performance loss. Numerical results compare the sensing performance and computational complexity of ISAC beamforming problem in the exact subspace and smaller subspaces.

0.14