CS Paper Radar

Non-Uniform Antenna Array Design with Large Inter-Element Spacing for Massive MIMO

Lin Chen, Qu Luo, Orestis Christogeorgos, Pei Xiao, Gabriele Gradoni, Mohsen Khalily, Yang Hao, Hongbin Li

eess.SP ·submitted 2026-09-07 16:15 UTC · v1

Abstract

In massive multiple-input multiple-output (MIMO) systems, uniform arrays are typically configured with inter-element spacing no greater than half a wavelength to avoid grating lobes and spatial aliasing. However, many emerging fifth- and sixth-generation (5G/6G) applications rely on distributed arrays whose inter-element spacing far exceeds half a wavelength. In this paper, we propose an electromagnetic mutual-information-theoretic (EMIT)-guided non-uniform array (NUA) design with large inter-element spacing for massive MIMO systems to address the grating lobes and spatial aliasing artifacts, and in the meantime, to reduce the hardware cost and energy consumption. We start by developing a multipath channel model for non-uniform planar arrays, and analyze the resulting channel characteristics in terms of inter-user interference, aperture efficiency, favorable propagation and channel capacity for the proposed typical NUA patterns. The model is further extended to wideband scenarios, where NUAs demonstrate improved robustness against beam squint due to their more compact element distribution. In addition, we introduce an EMIT approach to NUA design, which links the spatial sampling pattern of an antenna array to the capacity of the resulting MIMO channel. This gives rise to two complementary shaping strategies, amplitude tapering and geometric shaping, and their joint optimization. Numerical results demonstrate that the proposed NUAs significantly outperform conventional uniform arrays in aperture efficiency, channel orthogonality, beam squint mitigation, capacity, and error rate performance.

Closest papers

Nearest neighbours by meaning across the whole index.

Broadcasting in Centimeter-Wave Gigantic MIMO Systems: Beam Shaping is All You Need

cs.IT ·2026-10-21 ·Boyu Ning, Yike Xie, Jaebum Park, Songjie Yang, Weidong Mei +2 more
top venue similarity 0.63
Abstract

Beamforming is a key enabling technology for centimeter-wave Gigantic MIMO (G-MIMO) systems, using antenna arrays to generate wide beams for cell-wide broadcasting or narrow beams for data transmission. This paper presents a novel \emph{beam shaping technology} for designing environment-aware broadcast beams (i.e., beams for common control information delivery, as in 5G SSB). As a case study, we shape a \emph{prostrate beam} in the vertical plane to approximate uniform electromagnetic power distribution across the ground, thereby enhancing broadcast coverage quality. We first propose a geometric broadcasting model that, through coordinate transformation, relates base station height, beam spread, maximum service distance, and downtilt angle. Building on this model and the signal propagation model, we formulate the beam shaping problem as a non-convex optimization problem that aims to maximize ground-level coverage. To solve it, we develop a generalized optimization framework. We reformulate the problem into a matrix representation, equivalently transforming it into a target pursuit optimization (TPO) problem. Using variable substitution, the objective is convexified into a quadratically constrained quadratic program, and the non-convex rank constraint is handled via successive convex approximation, decomposing the problem into iteratively solved subproblems. We provide complexity and convergence analyses for the proposed algorithm. Numerical simulations confirm that the optimization effectively shapes the intended beam pattern and that the proposed prostrate beam yields significant performance gains, including substantially extended coverage distance, over conventional wide-beam benchmarks.

0.59

RF Chain Count to Mitigate Beam Split in Wideband Hybrid Arrays: From Far-Field to Near-Field

eess.SP ·2026-10-05 ·Ahmed Hussain, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil
similarity 0.63
Abstract

Deploying large antenna arrays transitions wireless communication into the radiative near-field (NF), where spherical wavefronts enable beamfocusing in the joint angle-distance domain. However, wideband beamforming with large antenna arrays suffers from beam split across both spatial dimensions. Although fully digital arrays can eliminate this impairment, their prohibitive hardware cost and power consumption motivate the adoption of hybrid array architectures equipped with a limited number of radio-frequency (RF) chains. This paper investigates the minimum number of RF chains required to mitigate the beam split. We derive closed-form expressions for the required number of RF chains in fully-connected (FC) architectures and propose an algorithm for sub-connected (SC) architectures, considering both uniform linear arrays (ULAs) and uniform circular arrays (UCAs). Our analysis reveals that beyond a focal distance of 10L, where L denotes the aperture length, the NF RF chain count converges to its far-field counterpart and becomes a function of the angle alone. Moreover, the FC hybrid architecture mitigates the beam split by using fewer RF chains than the SC architecture, albeit at the cost of increased complexity in the phase shifter network.

0.14

Sparse Rotatable Arrays (SRA): Unifying Array Aperture and Antenna Directivity for Wireless Communications

cs.IT ·2026-08-12 ·Ailing Zheng, Qingqing Wu, Xiyuan Liu, Wen Chen
similarity 0.61
Abstract

Sparse rotatable array (SRA) is a novel reconfigurable antenna architecture that jointly exploits sparse aperture configuration and antenna directivity to enhance spatial resolution for future wireless communications. Specifically, SRA activates a subset of rotatable antennas over a large candidate aperture and adjusts their boresight directions, thereby creating a directionally selective sparse aperture with reduced hardware requirements and enhanced spatial flexibility. In this paper, we investigate an SRA-aided multi-group communication system, where users are organized into spatial groups with different service requirements. We develop a group-aware SRA design framework by jointly optimizing the sparse-aperture allocation, RA orientations, and transmit beamforming to maximize the weighted max-min signal-to-interference-plus-noise ratio (SINR). Then, we characterize the operating principles of SRA and reveal that sparse aperture improves spatial resolution by enlarging the effective array aperture, while antenna directivity suppresses inter-group coupling through directional control, thereby enabling simplified group-wise beamforming structures. Guided by these insights, we develop a structured low-complexity alternating optimization algorithm that embeds a closed-form projected group-center RA orientation rule into the sparse-aperture allocation and beamforming design. The proposed algorithm combines analysis-guided initialization, sampled multi-start antenna-allocation search, and bisection-based second-order cone programming for beamforming. Numerical results show that the proposed SRA design closely approaches fully-shared SRA benchmarks and significantly outperforms compact subarray and omni sparse-array schemes.

0.04

Near-Field Dual-UPA Communications: A Generalized Geometric Approach

eess.SP ·2026-08-26 ·Li Zheng, Xing Hao, Ziru Chen, Yong Liu, Li Chen +1 more
published similarity 0.59
Abstract · This paper is accepted by IEEE globecom 2026

This paper investigates a near-field (NF) multiple-input multiple-output (MIMO) communication system equipped with dual uniform planar arrays (UPAs). We first develop a generalized geometric model to calculate the 3D distance between arbitrary antenna elements across the transmitter and receiver panels. Leveraging the distance analysis, we derive a closed-form near-field to far-field (NF-FF) boundary for dual-UPA configurations. By exploiting the geometric structure of the UPAs, we further decompose the near-field channel matrix into a Kronecker-product of two lower-dimensional matrices. This decomposition enables a low-complexity NF beamforming design for achievable-rate maximization. Numerical results validate the analysis and demonstrate that the conventional Rayleigh distance is a special case of the generalized model. Furthermore, the proposed beamforming design achieves near-optimal rate performance while significantly reducing the computational complexity compared to state-of-the-art NF beamforming methods.

0.21

Harnessing Mutual Coupling in Cell-Free mMIMO

cs.IT eess.SP ·2026-11-02 ·Erind Tufa, Antonio A. D'Amico, Luca Sanguinetti
published similarity 0.59
Abstract

This letter investigates a cell-free massive MIMO system with $L$ access points (APs), each employing a small fixed-form-factor, uniform linear array of $N$ potentially closely spaced antennas. Utilizing multiport communication theory, we analyze the impact of mutual coupling on uplink and downlink spectral efficiency (SE) under various impedance-matching strategies. We compare two deployment regimes: ($i$) increasing $N$ while $L$ is kept fixed, and ($ii$) increasing $N$ while fixing the total antenna count $M = NL$. Numerical results show that, with a full matching network, mutual coupling itself becomes beneficial when an AP serves several user equipments, which is the typical operating regime of user-centric cell-free networks. Furthermore, with full matching, antenna densification can enhance SE or allow for a reduction in the number of APs without performance loss. Since full matching networks remain of manageable size in the small arrays of distributed APs, unlike in large centralized arrays, cell-free networks offer a natural setting for exploiting mutual coupling.

0.36

Sparse Port Selection under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Haoyu Liang, Zaichen Zhang, Jian Dang
similarity 0.59
Abstract

Fluid antenna systems obtain spatial degrees of freedom by reconfiguring antenna positions within a confined region, a principle that extends to beamforming: shaped beams can be synthesized using far fewer radio-frequency feeds than candidate antenna positions. When the candidates are densely arranged, however, electromagnetic mutual coupling changes the relationship among terminal voltages, induced currents, and radiated fields, so an uncoupled model no longer describes the hardware and may activate an unsuitable set of ports, distorting the synthesized pattern. This paper develops a mutual-coupling-aware framework that converts the desired beam amplitude into a finite-aperture-compatible complex target and models the complete antenna lattice as a coupled multiport network, selecting the active ports and their source voltages through the coupled voltage-to-field response. Inactive candidate ports remain part of the network and carry induced currents, and every compared design is evaluated through the same electromagnetic model under the same source-voltage budget. Numerical results show that the mutual-coupling-aware design improves both the average mainlobe signal-to-noise ratio (SNR) and the peak sidelobe level (PSLL) over coupling-unaware selection and a fixed array, demonstrating that mutual coupling should be exploited in the design itself rather than compensated only in the final evaluation.

0.38

Mutual-Coupling-Aware Electromagnetic and Signal Processing Co-Design for Pixel Antenna Arrays

eess.SP ·2026-10-06 ·Ping Ma, Mengzhen Liu, Rang Liu, Ming Li, A. Lee Swindlehurst
similarity 0.58
Abstract · 7 pages, 5 figures, fonference

Reconfigurable pixel antenna arrays provide additional electromagnetic (EM) degrees of freedom for wireless transmission by enabling hardware-level adaptation of radiation responses. In practical arrays, inter-element mutual coupling (MC) alters the switch-state-dependent responses, causing MC-unaware designs to be mismatched with the realized coupled-array channels. To address this issue, we propose an MC-aware EM and signal-processing co-design framework for downlink multi-user multiple-input single-output (MU-MISO) systems. The full pixel antenna array is modeled as a unified multi-port circuit network that jointly characterizes the feed ports and switch-controlled pixel ports. By combining the impedance matrix extracted from Computer Simulation Technology (CST) Studio Suite simulations with the full-array open-circuit far-field responses, we construct a switch-state-dependent EM-domain channel that explicitly captures both intra-antenna pixel coupling and inter-element MC. Based on this model, we formulate a sum-rate maximization problem over the binary switch-state vector and the transmit precoder. To address the resulting mixed-integer non-convex problem, we develop an alternating optimization algorithm in which the binary switch-state vector is updated via sequential exhaustive block optimization (SEBO), while the transmit precoder is optimized using fractional programming (FP). CST-based simulations show that the proposed MC-aware design outperforms MC-unaware, MC-free, and conventional patch-array baselines. These results demonstrate that accurate MC modeling is essential not only for reducing model mismatch, but also for exploiting the coupled embedded responses of practical pixel antenna arrays.

0.41

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.57
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30