CS Paper Radar

Surrogate-Assisted Compact-Model Extraction for SKY130 CMOS at 77 K

Aaron Wang, Olivia Gzamouranis, Vaibhav Lohia, Hershel Fei Xun Weiner, Olivia Seidel, Richard Cavanaugh, Giuseppe Di Guglielmo, Nhan Tran, Davide Braga

cs.ET physics.ins-detcs.LGphysics.app-ph ·submitted 2026-11-16 18:57 UTC · v1

Abstract

Cryogenic circuit design requires compact transistor models that reproduce measured low-temperature behavior and run in standard circuit simulators. We fit BSIM4 parameters to measured I-V curves of SkyWater 130 nm (SKY130) transistors at 77 K using a neural surrogate of NGSpice. The surrogate maps compact-model parameters and device geometry to the complete set of output and transfer characteristics. Extraction is a bounded least-squares search: a bank of NGSpice simulations supplies initial candidates, finite differences of the surrogate supply the local Jacobian, and NGSpice re-simulates the resulting cards before selection. On 18 measured geometries, we compare a search over seven card parameters with a search over 43 parameters selected by NGSpice sensitivity. Relative to NGSpice re-simulations of the previously released cards, the two searches reduce the in-sample mean relative root-mean-square error (RRMS) by 17% and 26%, respectively. The 43-parameter search has the lower overall error, but the seven-parameter search has the lower mean on high-bias curves, and some individual curves have higher error than with the released cards under both searches.

Closest papers

Nearest neighbours by meaning across the whole index.

NEMESIS2.0: LLM-Aided Netlist-Driven Performance Equation Modeling for Accelerated Analog Circuit Sizing

cs.AR ·2026-11-13 ·Subhadip Ghosh, Ramesh Harjani, Sachin S. Sapatnekar
code/data similarity 0.55
Abstract · This paper is under review in the IEEE Transactions on Computer-Aided Design of Integrated Circuits & Systems (TCAD) : 14 pages

This work presents NEMESIS2.0, an open-source LLM-aided framework that automatically derives equation-based performance models for analog circuits. The resulting equations provide fast, accurate surrogates for SPICE evaluation. To validate the method, equation-based models are developed for seven circuit test cases in a commercial 65nm CMOS technology, covering 15 metrics on five operational transconductance amplifier topologies, and six metrics on two dynamic comparator topologies. When tested on 1000 unseen variants of these seven designs, each corresponding to a different set of independently sampled transistor sizes, the accuracy is found to be within 5% of SPICE. To demonstrate use cases for NEMESIS2.0, the generated models are used as performance evaluators in multiple transistor sizers based on different population-based stochastic search optimizers. For each of the seven test cases, transistor sizing is performed for 100 different sets of performance specifications, with final SPICE simulation confirming that 83.3% of the resulting designs meet all specifications after a single sizing run. The rest fail to meet the specifications due to discrepancies between the model and SPICE, and require iterative resizing under tightened specifications; all such scenarios meet specifications within five iterations. Within the transistor sizers, this equation-based performance analysis evaluates ~400 design candidates per second, versus 0.14 candidates per second for SPICE-based evaluation, achieving 196-238x sizing runtime speedup, including final SPICE verification.

0.23

Agentic TCAD Calibration Workflow for Oxide Semiconductor Transistors

cs.AI physics.ins-detcs.LGphysics.app-ph ·2026-09-10 ·Gyujun Jeong, Junmo Lee, Sungwon Cho, Woohyun Hwang, Kwangyou Seo +9 more
similarity 0.53
Abstract · Preprint. Submitted to an IEEE journal for review

Experimental TCAD calibration is essential for predictive technology modeling of emerging oxide semiconductor transistors. However, it remains time-consuming and expert dependent because of model ambiguity. Multiple physical models and parameter sets can reproduce the same measured transfer characteristics, while local fitting alone cannot uniquely identify the underlying device physics. We present the first demonstration of an agentic TCAD calibration workflow for a fabricated bottom-gate In--W--O (BG-IWO) transistor. Starting from the measured transfer curve and device information, the workflow uses measurement--TCAD residuals and local sensitivity tests to select bounded parameter corrections or evaluate additional physical models, and accept only updates that improve device metrics. The LLM agent orchestrates the workflow, while Sentaurus governs the device physics. For the 2\%-W reference device, five agent-suggested updates yield a fixed calibrated model, reducing the multi-metric device objective $J$ by 14.3$\times$. Maximum $V_{\mathrm{th}}$/$I_{\mathrm{on}}$ errors are 36.1~mV/0.022 decade for varying-drain-bias tests and 46.2~mV/0.062 decade for varying-channel-length tests, demonstrating model transferability across bias and geometry rather than a local parameter fit. W-composition tests provide process-sensitive insight. This agentic workflow provides a faster route to model development for emerging device technologies.

0.30

NN-Based FeFET Compact Modeling for SPICE Simulation

cs.ET ·2026-11-04 ·Rodion Novkin, Simon Thomann, Hussam Amrouch
similarity 0.51
Abstract · 7 pages

Prototyping and early-stage circuit evaluation for emerging transistor technologies require fast and accurate compact models for SPICE simulations. Standard physics-based compact models, such as BSIM, offer high fidelity but demand extensive domain expertise and time-consuming equation formulation for every new physical effect, significantly slowing technology development. Neural network (NN)-based models offer a scalable alternative approach, but they rely heavily on smooth numerical solver data with explicit high-order derivative information. However, measurement data suffers from complex noise patterns, making derivative extraction challenging and complicating NN-based transistor modeling. This work presents a derivative-free NN training framework employing spectral normalization to naturally smooth derivative behavior and filter measurement noise. Using drain current measurements from a fabricated 28 nm ferroelectric device, we design an NN-based compact model that captures the full spectrum of polarization amplitudes and supports dynamic polarization switching in transient simulations. To demonstrate its capability, we deploy the model in a commercial SPICE software to simulate write and read operations for large-scale memory arrays with up to 512x512 size, including parasitic effects. Our approach bridges raw measurements with NN-based SPICE-compatible transistor modeling, significantly reducing model development time and enabling rapid circuit-level prototyping for emerging devices.

0.11

NN-Based Transistor Modeling for Ultra-Fast SPICE Simulation and Standard Cell Library Characterization

cs.ET cs.LG ·2026-10-22 ·Rodion Novkin, Hussam Amrouch
benchmark similarity 0.51
Abstract · 11 pages

Neural network (NN)-based transistor models have proven to be a promising solution to accelerate device modeling. Although these models demonstrated remarkable speedup in circuit simulations, they were not rigorously tested in complex tasks within standard EDA tool flows for chip design, which require very high transistor model precision to provide accurate results and converge properly. To investigate their full potential and promise, we develop NN-based transistor models that accurately predict the drain current and various charges for a 3nm nanosheet, and employ the models for a standard cell library characterization. This enables us to evaluate the accuracy and speedup under a very wide range of SPICE simulations, benchmarking our models against an industry-standard implementation. Since standard cell library characterization involves thousands of SPICE simulations, it serves as a great benchmark for transistor model quality and consistency. To further evaluate model accuracy, we also perform analog- and digital-level simulations for various complex circuits. Our experiments reveal that NN-based models are a valid alternative to existing transistor compact models, capable of producing accurate delay and power estimates with a much higher speed and convergence time compared to the conventional Verilog-A-based industry-standard (BSIM-CMG) transistor compact model. Our NNs achieve sub-0.11% and 0.76% errors for delay and total power evaluation on a wide range of circuits, while taking up to 8 times less time during the standard cell library characterization. Additionally, we provide comprehensive information and guidance on NN accuracy, unveiling the relationship between NN size and its effect on circuit simulation precision.

0.35

PRISM-UDE: Physics-Regularized Iterative Symbolic Modeling of 3nm FinFETs via Universal Differential Equation

cs.ET cs.LG ·2026-08-14 ·Pranavanath Balamurali, Prathamesh Dinesh Joshi, Raj Abhijit Dandekar, Rajat Dandekar, Sreedath Panat
benchmark similarity 0.51
Abstract

Compact transistor models are the mathematical backbone of circuit simulation. However, at advanced nodes such as 3nm, transport physics becomes too complex for traditional hand-derived equations to capture accurately. Purely data-driven neural surrogates, on the other hand, are numerically unstable inside circuit solvers and offer no physical insight into their own predictions. We introduce PRISM-UDE (Physics-Regularized Iterative Symbolic Modeling via Universal Differential Equations), a framework that embeds a small neural network inside a physics-based transistor model, using the network only to learn the transport behavior that the analytical baseline misses, rather than replacing the physics altogether. Once trained, this neural correction is distilled into a single, interpretable closed-form expression via symbolic regression, making the final model fully analytical and simulator-ready. Applied to a 3nm FinFET benchmark dataset, PRISM-UDE reduces prediction error more than sixfold (70.33% to 11.01%) relative to the standard physics-only baseline. The distilled expression preserves this accuracy almost exactly while eliminating the neural network entirely. We further validate the extracted expression directly inside a SPICE circuit simulator, confirming stable, physically consistent behavior under both static bias sweeps and dynamic switching conditions.

0.04

Simulation-Efficient Analog Circuit Yield Optimization via Monte Carlo Zeroth-Order Gradient Estimation

cs.CE ·2026-09-25 ·Liyan Tan, Yequan Zhao, Ben F. Jamroz, Ari Feldman, Zheng Zhang
theory similarity 0.51
Abstract

Yield optimization under process variation is expensive because each candidate design must be evaluated across many Monte Carlo SPICE samples. The resulting finite-sample yield is also piecewise constant in the design parameters, providing little local information for optimization. We introduce zeroth-order Monte Carlo stochastic gradient descent (ZO-MC-SGD), a black-box method that converts continuous specification margins into stochastic descent directions. Each update evaluates opposite design perturbations under shared process samples, allowing a small simulation batch to estimate a local direction without differentiating SPICE or fitting a global surrogate model. A Spearman rank-correlation test checks that the margin-based loss orders designs consistently with empirical yield. We prove that the estimator is unbiased for a Gaussian-smoothed surrogate and derive variance and sample-complexity bounds with no explicit dependence on process dimension. Across five analog circuit benchmarks with up to 30 design variables and 42 process variables, ZO-MC-SGD reaches a mean yield of 0.95 on four circuits within 50--200 simulations and the empirical yield ceiling on the fifth. Relative to the best of five black-box and learning-based baselines, it reduces the required simulation budget by up to a factor of eight.

0.34

A Unified Physics-Aware Quantum Machine Learning Framework across Power GaN HEMTs and Logic Nanowire FETs: Predicting Unseen Process Splits and Held-Out Geometry Combinations with Lower Error and Tighter Split-to-Split Variability

cs.AI ·2026-09-04 ·Rushat Rai, Yun-Yuan Wang, Autsada Kakaen, Pei-Jie Chang, Doan Viet Nguyen +8 more
similarity 0.50
Abstract · 11 pages, 11 figures

We present a unified reinforcement-learning (RL) framework that discovers compact parametrized quantum circuits (PQCs) for data-scarce device modeling. A graph neural network (GNN) policy optimized by proximal policy optimization (PPO) searches circuit architectures using leave-one-group-out cross-validation (LOGOCV) error on held-out process or geometry groups as the reward. The framework achieves the lowest mean absolute error (MAE) on all 11 targets versus six classical baselines, with 59% lower error (Ioff) and 81% tighter fold variability (VTH) for HEMTs and 84% lower error (VTH, SS, Ioff) and 82% tighter fold variability (Ioff) for NWFETs. These results demonstrate the potential of RL-selected, classically simulated PQCs as compact surrogates with low OOD error and improved physical consistency, despite imposing no explicit physical constraints, penalty terms, or device-specific equations, on the two evaluated device datasets.

0.27

LOADBench: A Large Open Analog Dataset and Benchmark for Machine Learning in IC Design

cs.AI ·2026-10-15 ·M. Leibl, F. Azevedo, S. Uhlich, A. Bonetti, A. Venkitaraman +5 more
publishedbenchmarkcode/data similarity 0.50
Abstract · Dataset available on zenodo: https://zenodo.org/records/21759759 9 pages, 6 figures, Conference: MLCAD '26: 8th ACM/IEEE International Sympo…

Machine learning (ML) for analog IC design is constrained by limited open data and the absence of standardized evaluation: results reported in different papers are typically obtained on bespoke, often closed, datasets and with ad-hoc metrics, leaving comparisons across methods unreliable. We address both gaps with a large opensource dataset and a suite of standardized benchmarks. The dataset contains more than 100 operational amplifier (opamp) topologies (1-, 2-, and 3-stage) in the SkyWater130 PDK, each shipped with structural and functional annotations, topology-specific sizing constraints (symmetry and sizing rules), an Ngspice testbench, and a multi-objective NSGA-II sizing run producing around 103 Pareto-optimal and 106 intermediate sizing-performance pairs per topology. On top of this data we define six benchmark tasks with precise protocols: inverse sizing, topology selection, sub-circuit classification, structural circuit generation, Pareto-membership prediction, and multi-objective optimization. Thus, the data presented here constitutes the most comprehensive dataset for ML development in over four decades of analog IC design automation. The dataset, ground-truth annotations, and reference implementations of the metric-defining routines are released under an open license, enabling reproducible and directly comparable evaluation across heterogeneous analog design automation methods.

0.65