CS Paper Radar

LLM-Guided Cyber-Physical Attack Path Identification in Smart Grids

Amr Elshazly, Jesse Roberts, Rachad Atat, Muhammad Ismail

cs.CR cs.AI ·submitted 2026-11-18 17:16 UTC · v1
published

Abstract

Identifying high-impact attack paths in cyber-physical power systems is critical for improving grid resilience. Existing methods typically rely on either structural topology analysis or simulation-based cascading-failure models. Topology-based approaches capture connectivity but lack adversarial reasoning, while simulation-driven methods are primarily suited for offline analysis and are less effective for rapid evaluation of evolving attack scenarios. As a result, identifying realistic attack paths that jointly capture topology, threat semantics, and physical impact remains challenging. This paper presents a physics-grounded framework for identifying cyber-physical attack paths using large language models (LLMs), with cascading-failure-derived impact rankings used as physics-grounded references. The framework integrates system topology, LLM-guided STRIDE and MITRE ATT&CK threat modeling, and three baseline strategies for comparison: topology-driven, threat-driven, and fusion-based. Evaluation is performed using (i) critical-node overlap between LLM-inferred top-K rankings and cascading-failure-based ground truth; (ii) node-level similarity between LLM-inferred and reference paths; and (iii) path-level alignment capturing agreement in complete attack sequences. Results show that structured LLM-based threat modeling substantially improves alignment with physics-grounded references. In the cyber layer, critical-node overlap@3 increases from approximately 33% to as high as 100%, while node-level similarity reaches up to 65% and path-level alignment reaches up to 48%. In addition, the proposed framework reduces runtime by approximately 75--85% compared to the fusion-based baseline in the IEEE 14-bus system. These results suggest that LLM-guided attack path identification is a promising approach for efficient and impact-aware cyber-physical security analysis.

Comment
7 pages, 4 figures, 1 table. Accepted at IEEE IECON 2026

Closest papers

Nearest neighbours by meaning across the whole index.

RESILAGENT: A Three-Pillar Architecture for Cyber-Physical Resilience in Electrical Power and Energy Systems

cs.CR cs.AIeess.SY ·2026-11-16 ·Nikolaos Kekatos, Georgios Koutidis, Konstantinos Antonakopoulos, Stylianos Basagiannis, Sokratis Katsikas +4 more
publishedbenchmark similarity 0.70
Abstract · 7 pages, 5 figures, 1 table. Accepted at the 2026 IEEE International Conference on Cyber Security and Resilience (IEEE CSR 2026)

Electrical Power and Energy Systems face hybrid threats that combine cyber intrusions, physical sabotage and climate-driven stress, and routinely outpace today's siloed monitoring stacks. We present RESILAGENT, a concept architecture organised around three operational pillars, Sensing & Data Intelligence, Resilience Analytics & Reporting, and Incident Response & Recovery, mediated by a Cloud-based Orchestrator and exercised through a closed Detect-Simulate-Decide-Sign loop. The framework fuses agentic artificial intelligence and multimodal large language models for cross-modal detection, real-time digital twins for what-if simulation, and a permissioned blockchain anchor for tamper-evident threat intelligence and CER/NIS2-aligned evidence. We instantiate it on two scenarios, a transmission operator under coordinated cyber compromise, sabotage and heatwave, and a distribution operator under a supply-chain compromise during a storm, and report an IEEE-bus micro-benchmark that quantifies each pillar through false-data-injection attack detection, cyber-physical fusion lift, N-1 contingency screening and anchor cost.

0.44

A Decoupled Approach for Modeling N-k Interdiction with Induced Failures in Electric Power Grids

eess.SY ·2026-10-13 ·Andrew Chio, Kaarthik Sundar, Russell Bent, Nalini Venkatasubramanian
benchmark similarity 0.65
Abstract

The electric power grid is a critical infrastructure system subject to different types of failures which can have devastating impacts on society. One framework to study the resilience of the grid is the N-k interdiction model, which introduces an attacker and defender model to identify grid vulnerabilities. However, traditional N-k interdiction models characterize the power grid with steady-state assumptions. One key aspect missing from this analysis is the behavior of the grid as it evolves from the pre-failure grid state and post-failure grid state. During such a transition period, automated protection systems, transient instabilities, and other phenomena can trigger cascading failures that can occur before grid operators can respond. To bridge this gap, this paper first introduces the generalized induced failure N-k (N-k.k') problem, where an initial set of k failures induces an additional set of k' failures. In this context, we propose a disjoint optimization approach that decouples the computation of cascading failures from the interdiction model. This system response model, furthermore, is treated as a black box module without compromising the underlying performance guarantees of the interdiction model. Extensive experiments on several benchmark power grid case studies showcase the efficacy and scalability of the approach.

0.22

AI-Based Vulnerability Assessment Capability and Cyber Attack Graph Analysis

cs.CR ·2026-09-28 ·Joni Herttuainen, Kirsi Hellsten, Vesa Kuikka, Ambrose Kam, Arlanda Johnson +2 more
similarity 0.65
Abstract

Cyber threats targeting mission-critical infrastructure are becoming more sophisticated while the barrier to launching attacks continues to fall. Traditional point solutions like antivirus and firewalls are reactive and fail to address the combinatorial complexity of modern attack surfaces. This paper presents an investigation combining two complementary methodologies: Lockheed Martin's Vortex/Crow framework, which applies multi-agent reinforcement learning (MARL) over industry-standard cyber knowledge graph to identify and prioritize attack vectors and TTPs (tactics, techniques, and procedures); and Aalto's probabilistic attack graph model that combines network topology and its vulnerabilities to compute system-level risk metrics. The 2015 Ukraine Power Grid cyberattack serves as a well-documented validation scenario. Applied independently to the same operational technology (OT) network topology, both methodologies converge on the same attack vectors and exploit sequences as those documented in the incident record, thus providing mutual cross-validation. Attack graph analyses using node-level elimination experiments identify industrial control systems (ICS) as the most critical enablers of attack propagation, representing high-priority targets for defensive hardening. Comparison of CVSS (v2.0) and IronMiner vulnerability scoring yields in general consistent results, with IronMiner providing more actionable differentiation at network periphery nodes. The layered methodology of baseline assessment and node-level elimination proves to be scalable to large enterprise networks, thus offering defenders a structured, AI-enabled path to prioritize mitigation under realistic time and resource constraints.

0.24

AWARE-RG: Abstraction Aware Explanation of Resiliency Graphs for Cyber Physical Systems

cs.CR cs.AI ·2026-10-14 ·Shadaab Kawnain Bashir, Rakesh Podder, Philip D. Hopkins, Sarath Sreedharan, Indrakshi Ray +1 more
similarity 0.65
Abstract

Understanding the security posture of cyber physical systems (CPS) requires reasoning across both information technology (IT) and operational technology (OT). However, a security analyst often holds an incomplete, role-specific view of the underlying system which has most likely resulted from their knowledge limited by a need-to-know framework. Such an incomplete view can potentially lead them to incorrectly assess if a cyber attack produces an untoward physical consequence resulting in making uninformed decisions about system resilience. In this work, we present AWARE-RG (Abstraction Aware Explanation of Resiliency Graphs), a semi-automated, human-in-the-loop framework that provides an analyst with a role-bounded, need-to-know explanations of resiliency paths in a CPS. The AWARE-RG abstraction structure is derived using Formal Concept Analysis over MITRE ATT&CK for ICS tactics, ordered by the ICS Cyber Kill Chain. For valid attack-fault queries, plan repair and backward means-end analysis identify the missing dependencies, explain why the physical hazard is reachable, and suggest defensive strategies. For invalid attack-fault queries, AWARE-RG localizes the first abstraction level at which the path fails, and reports confirmed blocking conditions as hardening pointers.

0.12

Foundation Models Meet Power Grid Topology for Cascade Prediction

eess.SY ·2026-10-23 ·Soumav Biswas, Mia Naeini
similarity 0.63
Abstract · 10 pages

Accurate early-stage prediction of cascading failure severity is essential for assessing the vulnerability of power transmission networks. However, existing data-driven approaches often rely on network-specific representations, limiting their generalizability across power system topologies. This work investigates the complementary capabilities of Large Language Models (LLMs) and Graph Neural Networks (GNNs) for cascading failure severity prediction. First, standalone LLM predictors are developed using a LoRA-fine-tuned LLaMA-3-8B-Instruct model with varying degrees of topological information. A hybrid Graph-LLM fusion framework is then proposed, integrating a Topology-Aware Graph Attention Transformer (TAGAT) with the LLM through confidence-gated fusion. TAGAT captures structural dependencies among transmission lines, while the LLM extracts representations from early-stage power-flow observations and aggregated cascade descriptors. The frameworks are evaluated on 30,000 simulated cascading failure scenarios for each of the IEEE 118-bus and IEEE 300-bus systems. Using only the first four cascade steps, the hybrid framework achieves weighted F1 scores of 0.94 and 0.92, respectively. In cross-system transfer from IEEE 118-bus to IEEE 300-bus, it achieves 0.72 zero-shot accuracy, improving to 0.83 with limited target-system calibration, outperforming standalone models and conventional baselines. These results show the potential of combining graph-based structural learning with foundation models to improve cascading failure severity prediction and cross-system transferability.

0.24

AIDC Microgrid Vulnerability Assessment Under Computing-Power Coordinated Attacks

eess.SY ·2026-08-11 ·Ze Yu, Hongwei Zhen, Chao Shen, Mingyang Sun
similarity 0.62
Abstract

The rapid growth of large language model (LLM) services is expanding AI data centers (AIDCs), increasing electricity demand and associated carbon emissions. Renewable energy integration can mitigate these impacts but also strengthens the coupling between AIDC loads and inverter-interfaced generation, creating cross-domain cyber-physical vulnerabilities. Specifically, adversarial AI requests alter AIDC power demand, whereas inverter control tampering modifies source-side dynamics, and their combined impact on system stability varies with generation forecast and demand response uncertainties. To this end, we propose an uncertainty-aware AIDC microgrid vulnerability assessment framework under computing-power coordinated attacks. First, the framework maps adversarial AI requests to AIDC power variations and represents uncertainties in attack-induced demand responses and photovoltaic (PV) forecasts through confidence-weighted realizations. Then, impedance based stability analysis combines these realizations with bounded inverter parameter tampering to construct attack reachable domains and identify critical attack time windows. Furthermore, a separate criterion identifies fixed coordinated attack vectors that retain destabilizing capability throughout each selected window. Case studies demonstrate that, unlike either attack component applied alone, coordinated attacks within identified critical windows induce sustained inverter frequency oscillations with peak absolute deviations exceeding 20% of nominal frequency, whereas the evaluated out-of-window response remains bounded. The proposed method further identifies critical attack windows and the associated coordinated attack vectors.

0.04

CyberClear: A Benchmark for LLM Agent Systems on APT Attack Chain Provenance

cs.CR cs.AI ·2026-09-26 ·Qi Chen, Fushuo Huo, Hangli Shen, Jingcai Guo, Shuhao Li +1 more
benchmark similarity 0.62
Abstract

Large language model agents have demonstrated promising capabilities in cybersecurity tasks, yet their ability to reconstruct complete Advanced Persistent Threat attack campaigns from complex security logs remains largely unexplored. Existing cybersecurity benchmarks for agents mainly focus on vulnerability discovery, exploitation, and security analysis tasks, leaving the evaluation of attack chain provenance under realistic security logs insufficiently studied. To address this gap, we introduce CyberClear, a benchmark for evaluating LLM agents and advanced agent systems on APT attack chain provenance from long-context security logs. CyberClear covers both single-step attacks and multi-stage attack chains, requiring agents to identify attack evidence, infer attack progression, and generate provenance graphs containing entities, causal relationships, MITRE ATT&CK techniques, and forensic evidence. To enable comprehensive evaluation, we develop an evaluation method tailored to APT attack chain provenance. Unlike conventional text similarity metrics that focus on surface-level matching, our evaluation examines whether reconstructed graphs preserve the semantics of attack chains across single-step behavior correctness, multi-step behavior identification, temporal and causal consistency, entity and relationship fidelity, and overall attack narrative consistency. Advanced multi-agent systems powered by state-of-the-art LLMs still struggle on CyberClear, motivating us to propose CyberProvenance, an agent cyber harness designed for multi-agents that augments LLM agents with evidence accumulation, execution-based validation, and feedback-guided refinement mechanisms for reliable attack-chain provenance. Extensive evaluations on CyberClear demonstrate the effectiveness of CyberProvenance in improving evidence reasoning, execution-grounded validation, and complete APT attack chain reconstruction.

0.07

Detecting False Data Injection and Unstable Operation in Smart Grid via System-Aware Graph Boundary Learning

cs.CR ·2026-09-28 ·Emad Efatinasab, Denis Donadel, Mirco Rampazzo, Chuadhry Mujeeb Ahmed
similarity 0.62
Abstract

Cyber-physical power systems increasingly rely on data-driven tools to detect instability and support reliable grid operation. However, reliable stability prediction is difficult when unstable operating configurations are rare, sensitive, or unavailable during model development, since collecting such data safely and at scale is often impractical. At the same time, False Data Injection (FDI) attacks can manipulate reported system parameters to trigger false instability alarms or conceal unsafe operation, and such threats in Decentral Smart Grid Control (DSGC) systems remain largely unexplored. These challenges are rarely addressed jointly, leaving a gap between stability prediction and attack detection that this work aims to close. In this paper, we introduce StarGNN, a graph learning framework that learns the stable operating region exclusively from clean stable configurations and uses a single abnormality score to flag reported configurations that should not be trusted as evidence of safe operation, covering both genuine instability and unseen FDI manipulations. Each configuration is represented as a producer-consumer star graph and processed by a role aware graph neural network, with physics constrained pseudo-negatives generated by perturbing reaction time and price response parameters standing in for the unavailable unstable and attack data. A single threshold, calibrated only on held-out stable data, is used without task or attack specific adjustment. Evaluated on nine unseen FDI scenarios, StarGNN detects between 0.780 and 0.973 of attacks on stable configurations and retains a post attack instability recall between 0.972 and 0.999 on unstable ones, with 0.899 recall against a stronger adaptive attacker, showing that stable-only boundary learning can support both stability prediction and attack detection without access to genuine unstable labels or attack samples during training.

0.13