CS Paper Radar

On the Importance of Geometric Nonlinearity and Temperature-Dependent Properties in Multi-Material Thermo-Mechanical Topology Optimization

Shirin Hosseinmardi, Xiangyu Sun, Ramin Bostanabad

cs.CE cond-mat.mtrl-scics.LG ·submitted 2026-08-11 01:01 UTC · v2

Abstract

Thermo-mechanical compliant devices are commonly designed with small-strain linear elasticity and temperature-independent material properties, even though they might operate hundreds of kelvin above ambient where both assumptions are questionable. In this work, we quantify the effect and cost of each assumption in multi-material topology optimization of thermally actuated compliant devices. To this end, we introduce a physics-informed, simultaneous analysis-and-design framework with (i) a finite-strain quadratic-Hencky (logarithmic-strain) constitutive model whose isotropic thermal eigenstrain admits an exact additive split in log-strain space, and (ii) temperature-dependent conductivity, thermal expansion, and elastic moduli for a titanium--copper--steel material system. We optimize a thermal actuator and a thermal gripper at three design temperatures under both a baseline model and the full physics, subject to mass and manufacturability constraints. Every converged design is re-evaluated by verified nonlinear finite element solvers in the full factorial of constitutive law and property model. The comparison between the two factors reveals that the constitutive law is the decisive modeling choice: These devices work as linkages where linear kinematics mistakes rotation for compressive strain; its error therefore grows with the design temperature and concentrates on the very layouts that exploit rotation best. Because a linear optimizer also steers away from the rotation-rich mechanisms that would expose this bias, the model can deceptively appear trustworthy when validated against its own designs. Designing with the full physics yields consistently stronger and more temperature-robust devices at a modest increase in design-time cost.

Closest papers

Nearest neighbours by meaning across the whole index.

Data-Driven Discovery of Composition-Dependent Constitutive Models for Hyperelasticity and Viscoelasticity of Digital Materials

cs.AI cond-mat.mtrl-scicond-mat.soft ·2026-09-03 ·Josué García-Ávila, Beijun Shen, Manuel K. Rausch, Mary C. Boyce, Adrián Buganza-Tepole
similarity 0.57
Abstract · 28 pages including references, 9 figures in the main manuscript. Supplementary material is available upon request from the corresponding aut…

Digital materials fabricated by multi-material 3D printing are designed as controlled mixtures of stiff and compliant constituents, yielding effective responses that span more than an order of magnitude in apparent stiffness and exhibit strongly nonlinear, composition-dependent, and rate-dependent dissipative behavior. Classical finite-strain viscoelastic models represent such behavior with closed-form strain energy functions for equilibrium and non-equilibrium stresses as well as evolution of internal variables, which may limit flexibility when a single constitutive model is expected to generalize across materials and loading rates. Here, we present a data-driven multi-material constitutive modeling framework that generalizes a formulation by Bergström and Boyce. The proposed framework retains the structure of the classical model, namely multiplicative kinematics, invariant-based strain-energy functions, and a scalar dissipative evolution law directed along the normalized nonequilibrium deviatoric stress. For the equilibrium branch, the data-driven discovery framework either directly predicts closed-form model parameters as functions of composition or automatically constructs a polyconvex strain-energy function using neural ordinary differential equations (NODEs). The nonequilibrium branch kinetics are learned similarly, either by directly identifying closed-form parameters across compositions or by using appropriately constrained artificial neural networks. Using multi-rate uniaxial compression data across multiple material compositions, we show that the proposed formulation captures rate-dependent stiffness and hysteresis across compositions while preserving thermodynamic consistency.

0.57

Constrained neural softening functions for the Mullins effect in parameter-dependent materials

cs.CE ·2026-10-25 ·Dominik K. Klein, Jonas Fey, Maximilian Kannapinn, Oliver Weeger
similarity 0.55
Abstract

Accurately capturing the Mullins effect across varying material compositions remains challenging, as constitutive models must unify flexible representations of stress softening with physical consistency and robust parameter calibration. In this work, we investigate parameter-dependent physics-augmented neural network constitutive models within the pseudo-elastic modeling framework, focusing on structural constraints that ensure physically admissible neural softening functions. This paper has three key contributions: (1) We formulate different neural softening functions within the pseudo-elastic framework, including a multiplicative decomposition of the softening function that enables parameter-dependent ansatz functions satisfying common mechanical constitutive conditions by construction. (2) We derive a sufficient condition for ellipticity of pseudo-elastic constitutive models, which can be enforced in the constitutive models by construction. (3) We systematically investigate how flexibility and structural constraints influence the performance of neural softening functions in terms of prediction accuracy and calibration robustness. For this, we consider multiaxial experimental data of carbon black-filled EPDM rubber synthesized with varying amounts of curatives. The findings of our work suggest that neural softening functions are a promising extension of the classical pseudo-elastic framework and, when subject to suitable constraints, can improve predictive accuracy for highly nonlinear, parameter-dependent materials.

0.28

Calibration of neural viscoelastic models via full-field data

cs.CE ·2026-09-03 ·Brain M. Riemer, Markus Kästner, Karl A. Kalina
similarity 0.50
Abstract

We propose an unsupervised learning framework for calibrating a physics-augmented neural network (PANN) for small-strain viscoelasticity via full-field data. It only requires quantities that are directly accessible in real experiments for training, namely global reaction forces and surface displacements. The underlying PANN is embedded in the generalized standard materials theory, in which two scalar-valued potentials render the constitutive model thermodynamically consistent by construction, while invariant-based representations of the free energy and the dual dissipation potential additionally ensure material symmetry. Considering a thin specimen under the plane stress assumption, we formulate a constrained optimization problem based on the equilibrium gap method in combination with quasi-Newton optimizers and automatic differentiation. Thereby, the unknown out-of-plane strain follows from the plane stress condition and the evolution of the internal variables is captured by an implicit time integration scheme. The resulting system of nonlinear equations is solved via a local Newton iteration at quadrature point and time step. To drastically reduce the computational cost of training, the backward adjoint method is employed to compute the gradient of the target loss, instead of backpropagating through all Newton iteration steps. The proposed framework is demonstrated for synthetic data, including noisy displacements and forces, showing excellent agreement across a wide range of deformation rates and load paths.

0.43

Semi-Implicit Pairwise Descent for Nonlocal Continuum Mechanics

cs.GR ·2026-09-09 ·Xukun Luo, Xiao Cheng, Yuzhong Guo, Ying Qiao, Wencheng Wang +1 more
published similarity 0.50
Abstract

We propose Semi-Implicit Pairwise Descent (SIPD), a unified nonlocal pairwise framework for simulating large-scale hyperelastic materials involving complex contact and friction. By reformulating the Finite Element Method (FEM) equations of motion into a pairwise force representation from a nonlocal perspective, our approach avoids costly Hessian computations, leading to a reduction in per-iteration computational overhead. Furthermore, we propose an analytical projection strategy for projecting our Hessian-free coefficient matrices to positive semi-definiteness. And we treat contact and friction as a unified anisotropic elastic energy, allowing for a seamless integration into the elastic solver framework. We mathematically prove that our method is unconditionally stable and numerically convergent.Experimental results demonstrate that SIPD achieves real-time performance for million-scale simulations even under intricate contact and friction conditions.

0.37

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.49
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22

A Comparative Study on Robust Topology Optimization of Design-Dependent Pressure-Actuated Compliant Mechanisms with Quadrilateral Elements

cs.CE ·2026-09-28 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.49
Abstract

This paper presents a comparative study of compliant mechanisms generated using a robust topology optimization technique involving design-dependent pressure loads. Design domains are parameterized using standard and higher-order quadrilateral elements. Both eroded and blueprint configurations are considered. A min-max optimization model combined with an output-spring method is employed to extremize the mechanisms' output displacements. A volume and a strain energy constraint are applied to the blueprint and the eroded designs, respectively. The optimization process is executed using the method of moving asymptotes. Numerical experiments are performed to optimize the pressure-actuated inverter and gripper mechanisms using Q4, Q8, and Q9 elements, and the results are compared. The research highlights how quadrilateral element selection influences both the resulting topologies and performance characteristics.

0.35

Temperature-Dependent Multiphysics Modeling of Additive Friction Stir Deposition Using Multi-Task Coupled Physics-Informed Neural Networks

cs.CE physics.comp-ph ·2026-10-02 ·Dhrubajyoti Gupta, Nikhil Gotawala, Raghav Gnanasambandam, Rohit Kannan, Jian Yu +2 more
benchmark similarity 0.47
Abstract · 14 pages, 12 figures, 7 tables

Additive friction stir deposition (AFSD) involves coupled thermal and material-flow fields governed by frictional heating, plastic deformation, and tool-imposed boundary conditions. High-fidelity finite-volume methods (FVMs) can resolve these fields but are computationally expensive, while constant-property approximations can distort the predicted thermo-mechanical response. This work develops a steady-state multi-task coupled physics-informed neural network (MCoPINN) to predict three-dimensional temperature and material-flow fields while reconstructing temperature-dependent thermal conductivity, density, and specific heat from sparse property measurements. A theoretical analysis decomposes prediction error into property reconstruction and neural field-solver contributions and characterizes the discrepancy associated with constant-property models. A controlled one-dimensional nonlinear-conduction study evaluates property reconstruction under sparse measurements. The framework is then evaluated for AFSD against a temperature-dependent FVM benchmark and experimental thermocouple measurements. MCoPINN reproduces the reference thermal and material-flow fields and reduces average temperature root-mean-square error from 50.13 K for the constant-property CoPINN to 30.28 K across four traverse speeds. MCoPINN requires approximately 8.5 hours of training per condition, compared with 52 hours for the FVM benchmark. These results demonstrate computationally efficient, physics-coupled prediction with temperature-dependent material properties.

0.34

Integrated Heat and Power System Scheduling with Continuous-Time Thermal Dynamics via Bernstein-Galerkin Optimization

eess.SY ·2026-08-18 ·Jie Deng, Zhigang Li, J. H. Zheng, Ye Guo
top venue similarity 0.47
Abstract

Coordinated scheduling of district heating networks (DHNs) and electric power systems can improve operational flexibility and reduce costs by exploiting thermal inertia. Most existing formulations rely on simplified discrete-time DHN models, which may inadequately represent continuous spatiotemporal thermal dynamics and can lead to biased flexibility estimation and suboptimal schedules. In this paper, an integrated heat and power system scheduling framework that explicitly incorporates the continuous-time thermal dynamics of DHNs is proposed. A Bernstein-Galerkin transform method is developed to convert the underlying partial-differential thermal-dynamics constraints into a finite set of algebraic constraints, enabling tractable optimization while retaining dynamic fidelity. The resulting model transforms the original infinite-dimensional variational problem into a finite-dimensional coefficient optimization that can be solved using optimization solvers. Compared with conventional discretization approaches, the proposed method provides a more accurate representation of thermal dynamics and yields schedules with improved economic performance and reliability.

0.57