CS Paper Radar

Enabling Ultra-Low-Power Always-On Feedforward Leakage Suppression Logic Circuits with FDSOI

Clément Choné, Leslie Xu, Filippo Quadri, Pasquale Davide Schiavone, Alexandre Levisse, Jean-Luc Naguel, David Atienza, Andreas Burg

cs.ET ·submitted 2026-08-13 12:57 UTC · v1

Abstract

The growing deployment of real-time applications on wearable and Internet of Things (IoT) edge devices has intensified the need for energy-efficient, high-performance systems that meet stringent timing and energy constraints. Events-driven architectures leverage the sparsity of real-time to further improve system energy efficiency by employing an always-on (AO) domain to monitor inputs and activate a high-performance (HP) domain only when relevant events occur. However, for low-duty-cycle applications, the energy bottleneck shifts toward the AO domain, where leakage power dominates overall consumption. To mitigate this issue, AO circuits are typically implemented using high voltage threshold (HVT) or ultra-high voltage threshold (UHVT) transistors, thereby avoiding sub- and near-threshold operation, which is highly sensitive to process, voltage, and temperature (PVT) variations. In this context, feedforward leakage suppression logic (FLSL) has recently emerged as a promising candidate, offering reduced leakage compared to conventional. However, previous studies report a significant degradation in FLSL leakage performance in technology nodes below 90 nm, primarily due to increased gate and junction leakage currents. FDSOI technology, with its ability to effectively suppress junction leakage, provides an opportunity to overcome this limitation and restore FLSL efficiency in advanced nodes. Therefore, we demonstrate in this work that FLSL implemented in a 22 nm FDSOI technology can significantly reduce the energy consumption of small AO circuits with low-frequency inputs compared to state-of-the-art ultra-low-power CMOS designs. Silicon measurements on an FIR filter and an AES cryptographic core show reduced operating voltage and up to 9.8 x and 1.83 x reductions in leakage power compared to equivalent HVT and UHVT CMOS implementations, respectively.

Closest papers

Nearest neighbours by meaning across the whole index.

Design of a Fast Crowbar Protection Circuit for Single Event Effect Testing

eess.SY ·2026-08-27 ·Collin Burt, Joseph D'Amico, Joseph Van Grinsven, Tommy Aldaz, Nathaniel Dodds
similarity 0.58
Abstract · 5 pages. 11 figures. Submitted to the IEEE NSREC2026 Conference

We describe the design of a custom crowbar circuit that quickly removes power when a programmable current threshold is exceeded. This protects devices from permanent damage during single event latchup/burnout tests.

0.23

Chypothermia: Clock Freezing for Static Side-channel Attacks

cs.CR ·2026-09-10 ·Fatemeh Khojasteh Dana, Mehmet Ali Cetin, Xinrui Wang, Andrew Butler, Yuval Yarom +1 more
similarity 0.55
Abstract

Static side-channel attacks, which exploit halted-clock conditions to extract sensitive information, pose an increasing threat to chip security. To counter these attacks, various defenses have been proposed that monitor for abnormal clock behavior and trigger the clearing of sensitive data when clock anomalies are detected. In this work, we demonstrate that exposing a chip to cryogenic temperatures interferes with on-chip mixed-signal components, responsible for signal sensing and generation. Based on this observation, we develop Chypothermia, an attack that, without any electrical tampering with the system, disables the target clock sensor, the clock generation circuit, and the voltage sensors, while preserving the secret data. While effective at halting the clock, cooling is a slow process and, on its own, is often insufficient against systems equipped with temperature sensors designed to detect thermal anomalies. To bypass these protections, we combine Chypothermia with Chypnosis (Mitard et al., IEEE SP 2026) and show that, even within a moderately low-temperature operating range, this combination can halt the clock while evading detection. We implement Chypothermia on multiple FPGA/SoC platforms and demonstrate successful disabling of both soft-IP and hard-IP sensor implementations. Finally, we apply Chypothermia to the alert handler of the OpenTitan root of trust, which incorporates a state-of-the-art clock sensor, and show that the attack evades detection and prevents key zeroization. Finally, we introduce and implement an FPGA-compatible self-heating sensor as a countermeasure and demonstrate its robustness against Chypothermia.

0.26

Energy Efficient Near-Threshold Voltage Massive MIMO Computing

cs.AR ·2026-11-04 ·MD Salman Sakib, Mehdi Safarpour, Pejman Ghasemzadeh, Shahriar Shahabuddin
similarity 0.53
Abstract

Near-Threshold Computing (NTC) offers a substan- tial energy savings, i.e., up to 10x, for digital circuits. However, due to Process, Voltage, and Temperature (PVT) variations, low voltage operating digital processors face increased susceptibility to timing errors. This work equips conventional massive MIMO algorithms with computational error detection mechanisms, en- abling reliable operation down to near-threshold voltages. While conventional hardware based Timing Error Detection (TED) systems introduce substantial overhead, this work modifies MIMO algorithms to seamlessly integrate low overhead Algorithm Based Fault Tolerance (ABFT). A co-simulation framework combining transistor level SPICE simulations and workload aware fault injection is developed to investigate reliability, Bit Error Rate (BER), energy savings, and overheads of modified algorithms operating at low voltages. The transistor-level characterization was performed in PSpice using generic Level-1 Shichman-Hodges CMOS transistor models with Monte Carlo parameter variations. No specific CMOS fabrication process node was assumed. Conse- quently, the reported energy savings are analytical estimates and are not specific to a particular CMOS fabrication technology. We evaluate Gauss Seidel (GS), ADMM based infinity norm detection (ADMIN), and Conjugate Gradient (CG) detectors using circuit derived fault models. Results demonstrate remarkable algorith- mic resilience. Although undetected computational errors in some trials near the Point of First Failure (PoFF) were observed, BER increases by only 0.7% to 1.4%, while beyond PoFF, ABFT reported nearly all erroneous cases. The proposed checksum based ABFT detects most arithmetic and memory errors, with an estimated overhead below 2% for a 64 x 16 MIMO system, decreasing further for larger configurations.

0.25

HAWC-Leak: Heterogeneous Architecture Workload Classification utilizing Side-Channel Leakage

cs.CR ·2026-10-21 ·Muhtasim Alam Chowdhury, Arthur Kim, Rozhin Yasaei, Soheil Salehi
similarity 0.51
Abstract

Modern heterogeneous computing platforms, which integrate general-purpose processors with specialized accelerators such as FPGAs, have become the standard for high-performance and embedded applications. However, the shared physical resources of these systems introduce critical security vulnerabilities, where power consumption patterns can leak sensitive runtime information. While side-channel analysis is well established for extracting cryptographic keys from isolated algorithms, existing methods struggle to profile complex, dynamic systems where diverse workloads coexist on shared hardware resources. This paper presents HAWC-Leak, a dynamic workload classification framework designed to identify specific hardware accelerator tasks in real time using non-invasive power analysis. Unlike prior studies focused on extracting cryptographic secrets from isolated implementations, our approach profiles heterogeneous runtime behavior using machine learning to predict active workloads from features extracted from power traces. We implement a complete hardware-in-the-loop measurement testbed using the ChipWhisperer CW305 Artix-7 FPGA platform to capture high-resolution power signatures of diverse workloads including Advanced Encryption Standard (AES-128), Elliptic Curve Cryptography (ECC P-256), Secure Hash Algorithm (SHA-256), Convolutional Neural Network (CNN), and a system idle state. We develop a Hierarchical Random Forest classifier that processes real-time power data to identify the executing application in controlled mixed-activity scenarios where multiple accelerators are instantiated but only one executes at a time. Experimental results demonstrate that this framework achieves 100% classification accuracy across all evaluated scenarios, confirming that power consumption patterns serve as a reliable and distinctive fingerprint for profiling heterogeneous runtime behavior.

0.25

SmartBAN on Silicon by Structured Behavioral Modeling

cs.NI ·2026-08-29 ·Masato Yoshimi, Takahiro Ito, Kento Tanaka, Hirokazu Tanaka
published similarity 0.51
Abstract · 10 pages, 6 figures, 8 tables. Accepted for publication in IEEE Internet of Things Journal; v2 is the accepted version (revised after peer r…

Wireless body area networks (WBANs) underpin the Internet of Medical Things (IoMT). IEC/ETSI SmartBAN defines a lightweight time-division multiple access (TDMA) protocol, yet published implementations on commercial hardware remain partial. The standard specifies frame formats but leaves device-internal behavior in phase control, connection lifecycle, and slot timing unspecified. We present an operational SmartBAN realization on a commercial wireless system-on-chip (Nordic nRF54L15, Arm Cortex-M33, Zephyr RTOS) that implements initial connection, scheduled uplink, and timeout-based disconnection detection through a four-layer software architecture whose hardware abstraction layer is the intended portability boundary. Hub and Node Mealy automata supply one concrete design for the unspecified phase control and connection lifecycle, as a blueprint for the firmware's event-driven dispatch. Validation with 16 concurrent Nodes over 25 hours shows conformance across every transition the build exercises (all but one), >99.99% packet delivery, and timeout-triggered reconnection after the single observed disconnection. An analytical current model fits the measurements once it uses measured state currents; with datasheet currents it underestimates the average, mostly in the radio-off state, whose current we attribute to implementation-level overhead rather than the hardware. A same-SoC comparison with Bluetooth Low Energy (BLE) shows how each protocol departs from its schedule: SmartBAN, configured to send a fresh sample every interval instead of retransmitting, kept each Node's frame spacing within 1.1 ms of the interval but lost some frames; BLE lost none but deferred some by one or two intervals, and drew less than half SmartBAN's average current.

0.41

GPU-Accelerated Gate-Level Time-Based Power Analysis via Event-Density-Aware Partitioning and Kernel Fusion

cs.AR ·2026-09-05 ·Weihao Wang, Yikang Ouyang, Hongyuan Liu, Yuzhe Ma
top venue similarity 0.50
Abstract · Accepted for publication in ACM Transactions on Architecture and Code Optimization (TACO)

Power analysis is crucial in modern chip design flow. Particularly, time-based power analysis can provide fine-grained power consumption information to facilitate the diagnosis of power issues and guide power optimization accordingly. However, it may take tens of hours to conduct time-based power analysis on modern large-scale circuits, which greatly slows down the power optimization flow. In this paper, we present the first GPU-accelerated gate-level time-based power analysis framework. We propose a novel data structure to enable efficient state-dependent power retrieval. To accommodate the imbalanced event distribution across gates, we propose an event-density-aware partitioning strategy that allocates GPU threads based on gate event density. Finally, we fuse the power computation into a single kernel invocation to reduce redundant work in separate kernels. Experimental results show that our proposed framework achieves high accuracy while delivering up to 37.63x end-to-end speedup compared to multi-threaded Synopsys PrimeTime PX.

0.36

Evaluating Positive Feedback Adiabatic Logic in 16nm FinFET with a Realistic Power-Clock

cs.AR ·2026-09-17 ·Franciszek Łukowski, Maciej Pyrzowski, Aida Todri-Sanial
similarity 0.49
Abstract · 11 pages, 21 figures, 8 tables

Adiabatic logic reuses the energy stored on load capacitances through quasi-reversible switching, enabling a lower minimum energy consumption than conventional static CMOS. Yet its practicality in FinFET technologies and at multi-GHz clock rates has yet to be investigated. This work provides a systematic evaluation of Positive Feedback Adiabatic Logic (PFAL) simulated in the TSMC 16nm FinFET process. A set of PFAL standard-cell gates were realised, along with two representative combinational circuits - a 2$\times$2 multiplier and a 4-bit comparator - and compared against static CMOS logic using the energy--delay product (EDP) and the energy advantage metric $η= E_{\mathrm{CMOS}} / E_{\mathrm{PFAL}}$. Transient simulations reveal three sources of non-adiabatic loss: two specific to the PMOS/NMOS latch, threshold-voltage-related loss and a previously unreported redundant charging of the output node and one related to the complexity of PFAL logic trees. The low-threshold Buffer/NOT cell achieves a minimum EDP of $1.23\times10^{-26}$J$\cdot$s at $V_{\mathrm{CLK}} = 0.6$V and $f_{\mathrm{CLK}} = 7.94$GHz, while PFAL preserves an energy benefit over static CMOS of up to roughly $5\times$ at reduced frequencies and elevated supply voltages. A parallel-coupled quadrature voltage-controlled oscillator is designed as a realistic four-phase power-clock generator. With this non-ideal supply, the Buffer/NOT energy stays within $2\%$ of the ideal sinusoidal case at $3$GHz. A loading study quantifies the phase shift and amplitude reduction induced by increasing fan-out. Overall, the results provide a design-oriented evaluation of PFAL in 16nm FinFET and a motivation to exploit adiabatic logic for future low-power system architectures.

0.22

Experimental Verification of Fast Voltage Droop Correction Circuits

cs.AR ·2026-08-20 ·Shreyas Srinivas, Ian W. Jones, Carsten Schulze, Milos Krstic, Christoph Lenzen
similarity 0.49
Abstract · This article reports on the experimental validation of the design proposed in https://arxiv.org/abs/2501.18843

Due to the trend towards minimizing guard bands for energy saving purposes, voltage droops are a key limiting factor for the operational frequency of today's VLSI circuits. Adapting clock frequencies dynamically presents the challenge of metastability in the device that detects and stores the existence of voltage droops. We present an implementation of a fast all-digital circuit for adaptive response to droops using the IHP 130 nm process. The description of the design is presented in an accompanying paper. We experimentally validate the functionality of the design on a test chip.

0.36