CS Paper Radar

Experimental Verification of Fast Voltage Droop Correction Circuits

Shreyas Srinivas, Ian W. Jones, Carsten Schulze, Milos Krstic, Christoph Lenzen

cs.AR ·submitted 2026-08-20 12:23 UTC · v1

Abstract

Due to the trend towards minimizing guard bands for energy saving purposes, voltage droops are a key limiting factor for the operational frequency of today's VLSI circuits. Adapting clock frequencies dynamically presents the challenge of metastability in the device that detects and stores the existence of voltage droops. We present an implementation of a fast all-digital circuit for adaptive response to droops using the IHP 130 nm process. The description of the design is presented in an accompanying paper. We experimentally validate the functionality of the design on a test chip.

Comment
This article reports on the experimental validation of the design proposed in https://arxiv.org/abs/2501.18843

Closest papers

Nearest neighbours by meaning across the whole index.

Automated Pre-Silicon Verification of High-Speed DDR5 and LPDDR5/6 Memory Controllers: Closed-Loop Timing, Mode Register, and PHY Synchronization in UVM

cs.AR ·2026-09-28 ·Manan Patel, Anirban Majumder
similarity 0.50
Abstract · 4 pages, 2 figures, 1 table, IEEE two-column format

External memory interfaces (such as LPDDR5/4 and DDR5) are essential components of modern mobile, cloud, and enterprise computing systems. While memory manufacturers focus on physical DRAM die development, the vast majority of semiconductor firms design custom application ASICs that require a dedicated Memory Controller to interface with these standardized external memories. Consequently, pre-silicon design verification of the Memory Controller RTL -- acting as the Device Under Test (DUT) against a third-party DRAM Verification IP (VIP) -- is a ubiquitous and critical challenge across the global semiconductor industry. This article presents an automated, pre-silicon configuration and closed-loop initialization framework for Memory Controller verification. The proposed solution parses JEDEC timing and configuration parameters directly from the DRAM VIP's database files (such as Denali SOMA files) to configure the Memory Controller DUT's registers, while a custom Mode Register Register Abstraction Layer (MR-RAL) tracks volatile DRAM VIP states in real-time. Furthermore, a dynamic, re-compilation-free PHY initialization flow randomizes interface parameters directly in the testbench, executes on-the-fly configuration generation via system calls, and parses the resulting register write sequences at runtime. By integrating these automated methodologies into pre-silicon verification flows, engineers can eliminate setup overhead, prevent false protocol violations, and enable comprehensive randomized testing of complex PHY and Memory Controller configurations.

0.24

Improved Droop Control in DC Microgrids via Voltage-Locked Loop Synchronization

eess.SY ·2026-09-18 ·Ognjen Stanojev, Jovan Krajacic, Enea Bianda, Orcun Karaca, Mario Schweizer
similarity 0.49
Abstract

DC microgrids are low- or medium-voltage networks designed to connect and manage DC-based sources and loads. A key challenge in operating DC microgrids is maintaining the DC voltage within certain predefined limits while ensuring its stability. Droop control, the most common method towards addressing this challenge, enables decentralized voltage control and power sharing, but suffers from poor transient performance, resulting in voltage dips and overshoots in applications with fast varying loads such as AI datacenters. This paper introduces an improved droop control method based on voltage-locked loop synchronization, which ensures DC voltage stabilization with significantly improved transient response and achieves the desired load sharing between the available source converters. The core design principle is reflected in the functional separation of the control scheme into a virtual DC machine (VDCM) that operates as a spinning wheel and a virtual current source connected in parallel. The transient response is provided by the VDCM to damp and stabilize DC bus voltage variations, while the slow droop response is provided by the virtual current source to ensure steady-state power balance. The performance of the proposed method is validated in an experimental microgrid setup.

0.18

Testyard Benchmarks: a Dynamic RISC-V-based Benchmark Framework including DfT insertion, Structural and Functional Test Flows

cs.AR ·2026-11-10 ·Francesco Angione, Nicola di Gruttola Giardino, Gabriele Filipponi, Giusy Iaria, Irith Pomeranz +1 more
benchmarkcode/data similarity 0.49
Abstract

The main challenge of modern computing manufacturing is to produce silicon products capable of operating under the worst possible conditions, both in data centers and under stringent functional safety constraints. These requirements impose exceptionally high quality standards on silicon vendors, while testing costs keep escalating as transistors continue to shrink. Evaluating new testing strategies, however, presents a dual challenge for researchers. Standard academic benchmarks, such as the ITC-99 suite, remain valuable for fast test prototyping, but they lack the structural complexity of modern VLSI devices. Assessing the true computational effort of academic methodologies on industrial scale designs is equally difficult without accessible and scalable models. A further obstacle is the absence of a unified framework able to abstract the commands imposed by each EDA tool and the configurations tied to each technology library, forcing researchers to spend time adapting and debugging fragile scripts. This work addresses both needs by proposing the Testyard framework, built on top of the Chipyard framework, to derive a set of open-source, industrial scale benchmarks. It also extends the Hammer VLSI flow abstraction framework with hardware testing capabilities. Three new functionalities are introduced into Hammer: Design-for-Testability (DfT) insertion, ATPG, and functional tests fault simulation. Each functionality is driven by high-level descriptions, while the framework translates these inputs into the commands required by each EDA tool. The extended framework is applied to 13 representative SoC configurations from the Chipyard ecosystem, reporting the first comprehensive structural and functional test results across three technology libraries and multiple fault models, including stuck-at, transition delay, and small delay faults.

0.65

Reversing the Clock: Layout-Aware Recovery of Design Intent from Clock Distribution Networks

cs.CR ·2026-10-02 ·Sascha Tommasone, Zehra Karadağ, Christopher Pawlowicz, Michael Green, Bruno Machado Trindade +4 more
publishedcode/data similarity 0.49
Abstract · Accepted at the IEEE International Conference on Physical Assurance and Inspection of Electronics (PAINE) 2026

Hardware reverse engineering supports competitive analysis and hardware assurance by recovering information about an integrated circuit (IC) from its physical implementation. While existing techniques primarily recover the gate-level netlist, which represents logical functionality, they often overlook physical design decisions such as placement, routing, delay insertion, and interconnect optimization. The clock distribution network encapsulates many of these decisions; however, no prior published work has recovered this network from a fabricated IC to infer design intent. We present a layout-aware methodology that recovers and analyzes the clock distribution network by integrating a recovered gate-level netlist with layout information extracted from scanning electron microscope imagery. Our four-phase pipeline recovers clock-tree topology, buffering, gating and switching, interconnect delay, and crosstalk-mitigation measures. We demonstrate our methodology on a commercial 450 nm IC, recovering a global H-tree backbone with local X-tree-like branching, identifying an independent clock tree and global clock gating, quantifying latency, skew, and routing lengths, and confirming the absence of dedicated crosstalk mitigation. Together, these findings let us reason about the designer's intent. To encourage further research and support reproducibility, we release our clock tree recovery algorithm as open source.

0.45

Enabling Ultra-Low-Power Always-On Feedforward Leakage Suppression Logic Circuits with FDSOI

cs.ET ·2026-08-13 ·Clément Choné, Leslie Xu, Filippo Quadri, Pasquale Davide Schiavone, Alexandre Levisse +3 more
similarity 0.49
Abstract

The growing deployment of real-time applications on wearable and Internet of Things (IoT) edge devices has intensified the need for energy-efficient, high-performance systems that meet stringent timing and energy constraints. Events-driven architectures leverage the sparsity of real-time to further improve system energy efficiency by employing an always-on (AO) domain to monitor inputs and activate a high-performance (HP) domain only when relevant events occur. However, for low-duty-cycle applications, the energy bottleneck shifts toward the AO domain, where leakage power dominates overall consumption. To mitigate this issue, AO circuits are typically implemented using high voltage threshold (HVT) or ultra-high voltage threshold (UHVT) transistors, thereby avoiding sub- and near-threshold operation, which is highly sensitive to process, voltage, and temperature (PVT) variations. In this context, feedforward leakage suppression logic (FLSL) has recently emerged as a promising candidate, offering reduced leakage compared to conventional. However, previous studies report a significant degradation in FLSL leakage performance in technology nodes below 90 nm, primarily due to increased gate and junction leakage currents. FDSOI technology, with its ability to effectively suppress junction leakage, provides an opportunity to overcome this limitation and restore FLSL efficiency in advanced nodes. Therefore, we demonstrate in this work that FLSL implemented in a 22 nm FDSOI technology can significantly reduce the energy consumption of small AO circuits with low-frequency inputs compared to state-of-the-art ultra-low-power CMOS designs. Silicon measurements on an FIR filter and an AES cryptographic core show reduced operating voltage and up to 9.8 x and 1.83 x reductions in leakage power compared to equivalent HVT and UHVT CMOS implementations, respectively.

0.04

MEMPOWER: Efficient Power Management with Fine-grained Memory Analysis and Modeling for HPC Workloads

cs.DC ·2026-08-21 ·Nanda Velugoti, Joseph Manzano, Andres Marquez, Nathan Tallent, Kyle Hale
published similarity 0.48
Abstract

Managing the energy consumption and power efficiency of parallel applications is a significant issue in both HPC environments and in the cloud. As emerging applications continue to push against the memory wall of modern machines, the growing imbalance between compute and data movement creates new opportunities to intelligently tune CPU power consumption. Unfortunately, existing frequency and voltage scaling techniques do not adequately capture fine-grained changes in memory access behavior, rendering the compute/data access imbalance invisible to the components of the system that could capitalize on it, thus leaving potential power savings on the table. In this paper, we propose MEMPOWER, a flexible, model-based approach to exposing compute/data movement imbalance that characterizes the fine-grained memory behavior of parallel workloads. This characterization then informs our automated software framework which can statically instrument the application binary with model-determined voltage/frequency transitions that balance fine-grained changes in memory access behavior with the costs of hardware transitions. Using MEMPOWER, we demonstrate a reduction in EDP of 6% to 42% on a range of HPC benchmarks with minimal impact on execution time when compared to the standard OS/hardware-managed power control mechanism.

0.33

Clock-Gating Insertion Strategies on an Open-Source MSP430 Core: A Reproducible PPA Study and a Gate-Level Simulation Caveat

cs.AR ·2026-08-31 ·Xingran Huang, Qiming Guo, Jinwen Tang, Wenqi Jia, Dongzheng Wang
publishedcode/data similarity 0.48
Abstract · 8 pages, 9 figures, 5 tables. Accepted for presentation at IEEE UEMCON 2026. Code and reproducibility artifact: https://github.com/yanyana11…

Clock gating, the standard technique for cutting dynamic power, is introduced either as hand-written behavioral clock gates at the register-transfer level (RTL) or as integrated clock-gating (ICG) cells inserted automatically during synthesis; the two are widely treated as interchangeable. In this paper we show, on a real open-source 16-bit microcontroller core (openMSP430) synthesized with a 32 nm standard-cell library, that they are not equivalent in practice: behavioral latch-based RTL gating is functionally correct in ideal RTL simulation (10/10 self-checking testcases, identical to the ungated baseline) yet fails at gate level: the gated multiplier result is never captured and reads zero, while tool-inserted ICG cells pass gate-level simulation cleanly (10/10). We root-cause the failure to a hold race introduced by the late latch+AND gated clock, and show it persists across eight simulation configurations including full Standard Delay Format (SDF) back-annotation, not a simulator-setting artifact. We then quantify the power/area/timing (PPA) impact of three gating strengths: RTL behavioral (Opt1), synthesis ICG (Opt2), and both (Opt3), against the ungated baseline, across four workloads and three process corners (ss/tt/ff). The benefit is corner-robust: ICG (Opt2) cuts dynamic power by 74-81% and total power by 25-30% at every corner. We also show that in this leakage-dominated 32 nm regime the total-power win comes from the area/leakage reduction that gating brings (leakage -24 to -30%), not from the large dynamic saving, which instead dominates active-mode energy. Our recommendation for low-power design on open-source cores is to prefer tool-inserted ICG cells over hand-written behavioral clock gates. The full flow (Design Compiler synthesis, PrimeTime PX power, and self-checking verification) is released as an open artifact.

0.73

An Open-Source Standard-Cell Library for IHP 130nm Developed by Students

cs.AR ·2026-09-24 ·Oscar Castañeda, Lavinia Recchioni, Tobias Senti, Flurin Cahenzli, Marco Ferroni +24 more
code/dataunusual similarity 0.48
Abstract · Submitted to a conference

Standard-cell libraries form the critical interface between transistor-level circuit design and automated digital design flows, yet their design and characterization are rarely covered in depth in digital VLSI courses. This paper presents VLSI 5, a graduate-level course at ETH Zurich in which students design, lay out, characterize, and integrate their own standard cells using IHP's open-source 130nm SG13G2 process design kit. In the first course offering, 19 students developed EZ130 8T, an open-source eight-track standard-cell library comprising 220 cells. We evaluate successive library versions using eight synthesis benchmarks, across which EZ130 8T achieves significant area reduction compared to the SG13G2 library at competitive timing. For a postlayout 8x8 matrix-vector multiplier, EZ130 8T reduces cell area by 35% and energy by 39% while maintaining virtually the same clock period. The library has already been adopted in other ETH Zurich VLSI courses, enabling the creation of chips entirely designed by students down to the transistor level.

0.38