CS Paper Radar

ReliaGate: Reliability Routing for Low-Stakes Wearable Stress Prediction

Jaden Moon, Yu Wu, Arvind Pillai, Andrew Campbell

cs.LG cs.HC ·submitted 2026-08-16 22:51 UTC · v1
published

Abstract

We study when a wearable stress system should surface a prediction rather than change it. In low-stakes reflection and summary settings, aggregate accuracy is insufficient because withholding can reduce error while leaving some people with little or no information. We formulate fixed-label reliability routing: after a locked classifier emits a protocol-defined stress/non-stress label, a post-hoc gate surfaces that unchanged label or withholds it as unavailable. ReliaGate assembles established confidence, signal-quality/trust, agreement, train-standardized atypicality, and train-fitted geometry cues into a post-hoc correctness score. We evaluate four wearable datasets using subject-disjoint folds, validation-selected routing, paired held-out-subject intervals, and pooled and per-subject analyses. WESAD point estimates favored ReliaGate, UBFC-Phys primary coverage/risk intervals favored ReliaGate, and E4 checks were mixed. ReliaGate provides an operational framework for studying surfaced-label error, output availability, and accepted-output distribution across subjects, without revising labels or providing clinical or finite-sample risk guarantees.

Comment
Accepted at WellComp 2026, held with UbiComp/ISWC 2026. 7 pages, 4 tables, and 1 figure. To appear in UbiComp Companion '26. ACM DOI: 10.1145/3798063.3841770

Closest papers

Nearest neighbours by meaning across the whole index.

When Clean Signals Are Not Enough: Detecting Structural Ambiguity for Safe Wearable Stress Classification

cs.AI ·2026-08-19 ·Saba A. Farahani, Hung Cao, Amir M. Rahmani
published similarity 0.70
Abstract · 4 pages, 3 figures, 1 table. Accepted at the 2026 IEEE 22nd International Conference on Body Sensor Networks (BSN 2026)

Wearable stress classifiers can achieve strong average performance while failing completely for a particular individual. On WESAD, a Random Forest reaches 93.0% mean accuracy yet yields F1 = 0 for Subject 14, whose cross-signal coupling weakens near stress onset. We call this structural ambiguity: individually plausible physiological channels form an inter-signal pattern that is poorly supported by the person's non-stress reference. We introduce the Individual Conformal Coupling Monitor (ICCM), a lightweight and transparent pre-inference monitor that quantifies subject-specific coupling divergence and routes each window to classify, defer, or abstain without retraining the downstream classifier. Across WESAD (N = 15) and Stress-Predict (N = 35), full-cohort Pearson associations between ambiguity and accuracy are negative (r = -0.607, p = 0.016; r = -0.412, p = 0.014). Robustness analyses temper this finding: rank correlations are not significant, and the WESAD association disappears when Subject 14 is removed. ICCM changes false-positive counts from 29 to 27 and 94 to 92, although neither paired change is significant. It withholds 3 of Subject 14's 21 stress windows but does not repair the missed-stress failure. These results position ICCM as an interpretable signal of unsupported physiology and individual failure, rather than a stand-alone safety guarantee.

0.20

When Adaptation Hurts: Split Sensitivity and Person-Level Negative Transfer in Federated Wearable Onboarding

cs.LG cs.DC ·2026-08-18 ·Rahil Aftab, Vineet Kumar Rakesh, Soumya Mazumdar, Tapas Samanta
benchmarktheorycode/data similarity 0.60
Abstract · 14 pages, 2 figures, 4 tables; supplementary material included. Code and supplementary scripts: https://github.com/TitanRahil/When-Adaptatio…

Federated wearable models eventually serve people absent from source training, but favorable average accuracy does not establish that unlabeled onboarding helps each person. We evaluate six core onboarding strategies on five wearable datasets under a leakage-controlled protocol that fixes source checkpoints, estimates normalization from source data only, separates calibration from evaluation recordings, and performs inference over held-out people rather than windows, devices, or random seeds. Completing all eligible HHAR and PAMAP2 outer-person rotations materially changes the conclusion obtained from the original frozen fold. On HHAR, balanced accuracy on that single person is 95.6-97.2% across methods versus 78.3-83.0% over all nine users, a reduction of 13.8-17.8 percentage points (pp). The displayed mean leader changes on both datasets, while paired leader-runner bootstrap intervals include zero and do not resolve a superior method. No adaptive core mechanism combines positive mean gain in all five datasets with zero seed-averaged person-level losses greater than 2 percentage points (pp). FedBN has one such loss and ATP-style adaptation has eight; Feature-only has none after seed averaging, but its exact one-sided 95% upper bound is 7.6%. A complementary seed-person stress audit records 4, 22, and 10 harmful realizations out of 114 for FedBN, ATP-style, and Feature-only, respectively; these are repeated realizations, not independent participants. Tail quality, calibration availability, and fall-window specificity reveal additional failures hidden by mean accuracy. The study therefore provides an auditable development benchmark and failure map rather than a universal-superiority or deployment-safety claim.

0.37

Adaptive Gait Biofeedback With Participant-Held-Out Modeling and Participant-Specific Updating in Chronic Ankle Instability

cs.AI eess.SP ·2026-10-05 ·Jaeyoon Kim, Veronika Lebisova, Jeniya Sultana, Jaeyoung Cho, Jaeho Jang
similarity 0.58
Abstract · 28 pages (14-page main manuscript and 14-page supplementary material), 5 main figures

Adaptive gait biofeedback may support repeated practice in chronic ankle instability, but its evaluation must address model performance and human response. We evaluated a temporal convolutional classifier on protocol-defined, angle-derived GOOD/BAD gait-cycle labels using participant-held-out leave-one-subject-out (LOSO) cross-validation in 20 participants. Seven participants in the adaptive-intervention group completed nine sessions over three weeks, with one motion-capture recording analyzed per session. Models updated after failed sessions were compared offline with their parent models on the same-session validation subset used for candidate selection and the first subsequent adaptive-session recording. Frontal-plane ankle angle was compared between the adaptive group and 10 sequentially enrolled controls at Baseline, Post, and 7-day Retention. Across 20 held-out folds, mean fold-level area under the receiver operating characteristic curve (AUROC) was 0.948, sensitivity for angle-threshold-exceeding BAD cycles was 0.941, and specificity for angle-threshold-meeting GOOD cycles was 0.366. Mean BAD-class F1 was higher in candidate models by 0.187 on the same-session subset and 0.118 on the first subsequent recording. At Post, the adaptive group had a baseline-adjusted frontal-plane ankle angle 5.168 degrees lower than controls (95% confidence interval, 1.766-8.569 degrees lower); the Retention contrast was uncertain. These findings characterize population-model discrimination and offline participant-specific updating during repeated biofeedback use, alongside a nonrandomized Post frontal-plane ankle angle association. They do not establish independent clinical gait classification or a causal benefit of updating.

0.23

MC-TRCM: Observation-Aware Recursive Fusion for Incomplete Mobile and Wearable Mental-Health Feature Views

cs.LG ·2026-10-08 ·Wentao Wang, Lifeng Han, Zining Ren, Hengyu Zhong, Guangyu Zou
publishedsurveycode/data similarity 0.57
Abstract · Accepted to ICONIP 2026. Code is available at https://github.com/Botwwt/MC-TRCM

Public mobile and wearable mental-health datasets often provide summarized feature tables rather than synchronized raw sensor streams. In these releases, each anchor corresponds to a survey or label time and may combine phone or wearable summaries, prior symptom scores, demographics, clinical variables, and source-availability indicators. We propose the Modality-Conditioned Temporal Recursive Context Model (MC-TRCM), which preserves each feature source as a separate token and incorporates missingness as part of the input context. Observed sources are encoded with values and missingness summaries, absent sources use learned absence tokens, dataset and task embeddings condition fusion, and a recursive prediction head refines each output over validation-selected steps. We evaluated MC-TRCM on six predefined endpoints from DepreST-CAT and Prediction of Severity Change-Depression (PSYCHE-D) using participant-level splits and validation-only model selection. MC-TRCM achieved the lowest mean absolute error on DepreST-CAT Patient Health Questionnaire-9 (PHQ-9) and Generalized Anxiety Disorder-7 (GAD-7) severity, improving over the best tabular reference by 0.181 and 0.217 scale points. Classification endpoints showed task-dependent behavior: MC-TRCM matched the best rounded GAD-7 category balanced accuracy, was numerically highest by 0.002 balanced-accuracy points on PSYCHE-D multiclass prediction, and remained close to the strongest references on PHQ-9 category and PSYCHE-D binary prediction. Ablations support Feature-wise Linear Modulation, absence tokens, missingness projections, and recursive refinement, while calibration and feature-source controls characterize endpoint behavior. Our code is available at https://github.com/Botwwt/MC-TRCM.

0.48

When Temporal Perturbations Act Like Sensor Biases: Label-Free Auditing of Wearable Activity Recognizers

cs.LG cs.AIcs.CR ·2026-09-24 ·Qingyu Wu, Yuan Wei, Renju Liu, Hua Cheng
similarity 0.57
Abstract

Wearable human-activity recognition (HAR) models operate across sensors, subjects, and backbones, yet a smooth waveform may appear temporal while exploiting a persistent sensor offset primarily. We introduce SpectrumAudit, a label-sealed audit that fits a phase-randomized full-window stimulus on calibration windows from subjects held out from training and testing. After selection, it replays its exact DC projection and budget-constrained zero-mean residual on the same frozen victim without refitting. Across 27 victims from three datasets and three backbones, the selected waveforms cause 2.87-40.83-point three-phase robust accuracy losses. Under this replay budget, DC is more damaging than AC on 24/27 victims and recovers at least 90% of the full drop on 22/27; all 5 failures occur on WISDM. In a held-out UTD-MHAD check, the selected waveform causes 13.49-pp accuracy and 11.68-pp macro-F1 losses, versus -0.66 pp for matched random changes. The audit diagnoses offset versus zero-mean variation under a common peak-budget cap. The code will be released upon acceptance.

0.34

Cyber-Secure Wearable, Ultra-Low-Power Networked Sensors for Soldier Health Monitoring: Insights from the CAPSARII project

cs.ET cs.AIcs.ARcs.CR+2 ·2026-11-15 ·Luciano Bozzi, Christian Celidonio, Umberto Nuzzi, Massimo Biagini, Stefano Cherubin +17 more
publishedbenchmark similarity 0.55
Abstract · Pre-print version

The CAPSARII project advances a cyber-secure, ultra-low-power wearable platform and Internet of Battlefield Things (IoBT) framework to support real-time monitoring of military personnel and data-driven decision support. The architecture integrates smart-textile sensing, a body/squad area mesh, edge-deployed AI on secure RISC-V microcontrollers, and cloud/federated analytics for cross-mission learning and comparative studies. Two representative use cases--pilot fatigue and warfighters operating in harsh environments--guide requirements, validation, and interface design (including HUD and haptic feedback). As an initial step toward embedded models, we benchmark stress classification on a public wearable dataset: tree-ensemble baselines achieve state-of-the-art performance for accuracy and F1 (e.g., XGBoost: $\mathrm{Accuracy}=0.901\!\pm\!0.023$, $\mathrm{F1}=0.920\!\pm\!0.019$), while a feature-based Transformer attains the highest AUC ($0.963\!\pm\!0.025$), informing feature-engineering and compression choices for edge deployment. Building on these results, CAPSARII employs HW/SW co-design, model compression (pruning, quantization, distillation), and precision tuning to meet stringent energy and memory budgets; it further investigates Processing-in-Memory accelerators for future efficiency gains. A structured gap analysis highlights the remaining challenges: establishing validation standards for physiological signal quality and textile durability; achieving low-latency, scalable BAN/SAN communications under mobility and interference; and deploying hybrid lightweight/post-quantum cryptography with robust device identity and side-channel resilience on constrained endpoints. By consolidating these elements into a coherent, secure IoBT stack, CAPSARII delineates a practical roadmap from laboratory baselines to mission-ready soldier monitoring in both training and operational scenarios.

0.34

Decodable but Not Accessible: Auditing Distance-Based Reliability Estimation on Disentangled Skin-Lesion Representations

eess.IV cs.CV ·2026-08-10 ·Duc-Vinh Tran
similarity 0.54
Abstract

Distance-based reliability estimation assumes that a representation's geometry reflects its trustworthiness, yet this assumption is rarely tested under training interventions that reshape geometry directly. We audit this assumption under domain-adversarial representation learning using a disentanglement dose-response ladder. Three checkpoint families share the same architecture and a 16-dimensional representation, differing only in orthogonality strength (lambda = 0, 1, 5). Representation geometry changed substantially with disentanglement strength: the condition number shifted by two orders of magnitude (Kendall tau = 0.84, exact p = 2.8e-5). This change was not accompanied by improved reliability estimation: Mahalanobis-distance AUROC (ISIC-test vs. PAD-UFES) remained flat and below chance (about 0.40) at every level, with no significant association with any of five geometry metrics tested. The same failure was observed for cosine-to-centroid and pooled k-nearest-neighbor scorers, plus three non-distance-based scorers: an energy-based confidence score, Virtual-Logit Matching, and a kernel density estimator. Seven of eight scorers converged on the same result; the energy-based score showed an isolated upward trend that we report but do not treat as evidence against the overall pattern. A supervised probe with no access to the training objective recovered domain membership from the identical embeddings at 0.72-0.81 AUROC across every level, showing that the relevant information was not absent from the representation. These findings indicate that classification performance alone can overlook whether information in a learned representation is organized in a form that downstream reliability estimators can use. Information can remain decodable while becoming largely inaccessible to non-probing reliability estimators.

0.04

REFIT: Recognize, Fix, and Test Wearable Sensor Placement Shifts without Labels

cs.LG cs.HC ·2026-10-06 ·Bangxun Tang
similarity 0.54
Abstract · 25 pages, 5 figures, 14 tables. Under review

We present REFIT, an input calibration for frozen activity-recognition models whose inertial sensors are worn differently at deployment than in training. When users move a watch to the other wrist or put a strap sensor back on turned, the model sees the same motion on changed axes. REFIT undoes such shifts without labels or retraining. It describes them by families of axis transforms, such as reflections and rotations, and fits each family to the user's data so that simple statistics match those of the training data. The family that removes most of the mismatch names the shift. REFIT fixes the shift by applying the best member of that family before the frozen model and re-estimating its normalization statistics. It tests the fixed model with a label-free accuracy estimate and asks the user to re-wear the sensor when it is low. Experiments on real left/right sensor pairs and on real and simulated re-attachment show that REFIT outperforms label-free test-time adaptation methods on every dataset and restores most of the accuracy lost to re-attachment. It names injected shifts far more reliably than a confidence-based selector. After a correction over all signed permutations of the axes, the estimate separates successful from failed corrections.

0.24