CS Paper Radar

Real-Time Symbol-Domain OFDM Radar in an OpenAirInterface 5G Base Station With O-RAN Sensing Services

Karim Saifullin, Sajid Ahmed, Mohamed-Slim Alouini

eess.SP ·submitted 2026-08-17 15:25 UTC · v2

Abstract

This paper presents a real-time orthogonal frequency-division multiplexing (OFDM) radar embedded in the OpenAirInterface (OAI) 5G base-station process. The radar removes communication symbols by regularized element-wise division and performs range-Doppler processing and ordered-statistic constant-false-alarm-rate detection online without modifying the 5G waveform. The implemented system provides 2.57 m nominal range resolution and 0.28 m/s velocity resolution. Hardware measurements identify and mitigate several implementation-specific limitations, most notably a deterministic carrier-dependent transmit-receive phase rotation on a Universal Software Radio Peripheral (USRP) X300. Selecting a tuning-grid-aligned carrier improves mean-removal clutter suppression from -16.4 dB to 38.0 dB and reduces coherent-integration loss from 19.81 dB to 0.27 dB. The measured processing gain closely agrees with its predicted value. Instrumented worker timing confirms real-time operation, with a conservative 58.4 percent utilization bound and no dropped soundings. A custom E2 service model, E2SM-RADAR, exports detections and a compact slow-time product to a near-real-time RAN Intelligent Controller. Live end-to-end operation demonstrates reliable delivery and supports controller-side tracking, micro-Doppler analysis, and classification. With a commercial user equipment connected on the same carrier, measurements show no measurable difference in downlink throughput estimate with sensing enabled, while the radar sensing bandwidth follows the scheduler allocation. Video demonstration can be found in youtube: youtu.be/GaYAcTJ8RKI

Closest papers

Nearest neighbours by meaning across the whole index.

FM-OFDM: A Constant-Envelope Sensing Waveform with Phase-Differencing Receiver Processing

eess.SP ·2026-09-22 ·Amir Bouziane, Hüseyin Arslan
similarity 0.62
Abstract

Cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) is widely adopted as a reference waveform for integrated sensing and communication (ISAC). However, its high peak-to-average power ratio (PAPR) requires power amplifier back-off, thereby reducing the available sensing link budget. Frequency-modulated OFDM (FM-OFDM) provides a constant-envelope signal with 0 dB PAPR and has demonstrated reliable communication performance in high-mobility scenarios, but its sensing characteristics remain largely unexplored. This paper characterizes FM-OFDM as a sensing waveform based on its bandwidth, ambiguity function, sidelobe behavior, and Doppler estimation capability. The analysis shows that its data dependent sidelobe floor is incoherent and decreases through across frame integration, whereas the corresponding CP-OFDM floor remains unchanged. Consequently, under equal occupied bandwidth and transmit power, frame-level integration reverses the single-symbol performance ordering and provides FM-OFDM with approximately 20 dB of additional dynamic range for weak-target detection. Moreover, the zero-delay cut of the FMOFDM ambiguity function is shown to be deterministic and independent of the transmitted data realization, in contrast to linearly modulated waveforms, while a closed-form expression is derived for the sidelobe floor away from the zero-delay cut. Since the nonlinear mapping between the data symbols and time-domain samples prevents the direct application of the conventional CP-OFDM range-Doppler processing chain, a weighted phase-increment Doppler estimator is developed. The proposed estimator enables closed-form prediction of the sensing floor and its crossover point with a minimum computational complexity.

0.32

Virtualized 5G Tesbed using OpenAirInterface: Tutorial and Benchmarking Tests

cs.NI ·2026-09-11 ·M. Dória, V. Sousa, A. Campos, N. Oliveira, P. Eduardo +7 more
publishedbenchmarkhighly cited similarity 0.57
Abstract

The development of 5G and its evolutionary path to 6G brings virtualization as close as possible to the antennas. Native 3GPP systems are now software running at servers boosted by accelerator cards to cope with computationally intense signal processing. Meanwhile, the Radio Frequency (RF) front-end is still proprietary hardware, sheltering specific PHY-layer procedures like passband amplification/modulation. This approach takes advantage of the software's flexibility while keeping the complex microsecond signal processing performance from modern telecommunication systems. This paper provides tutorial material on the Core Network and Radio Access Network of OpenAirInterface (OAI) 5G stack on top of Universal Software Radio Peripheral (USRP) platforms. A set of blueprints showcases OAI's ability to provide a virtualized 5G network with different transmission capabilities and the possibility to use it with commercial mobile phones. Configuration discussions and throughput benchmark analyses follow installation and deployment instructions. Our results show that 5G prototyping using OAI and USRP frontends can lead to good reproducibility and consistent throughput.

0.49

Doppler-compensated Space-time Coding for MIMO PMCW Radar

eess.SP ·2026-10-19 ·Gabriel Daniel, Hanqing Wu, Ashish Pandharipande, Geert Leus
similarity 0.57
Abstract · Under review for a publication in IEEE Transactions on Signal Processing

Phase modulated continuous wave (PMCW) radar is an attractive choice for automotive sensing due to its high dynamic range, interference robustness, and support for integrated communication and sensing. In multiple-input multiple-output (MIMO) PMCW radar, code division multiplexing (CDM) separates transmit signals, but non-ideal auto- and cross-correlation properties increase range sidelobes and degrade dynamic range. This paper proposes a Doppler-compensated space-time coding (STC)-based MIMO PMCW radar framework that separates transmit signals before range correlation, eliminating cross-correlation terms under perfect compensation and allowing the same binary sequence to be used across transmit antennas. The Doppler influence on STC decoding is analytically characterized, showing that chip-wise and inter-STC-slot phase distortions increase range sidelobes and generate ghost components in the direction-of-arrival (DOA) spectrum. To mitigate these effects, Doppler is estimated first, followed by joint fast-time and STC-slot compensation before decoding. Residual STC leakage under imperfect Doppler estimation is quantified, and the processing is extended to multiple moving targets through Doppler-bin-dependent compensation. Theoretical analysis and simulation results demonstrate reduced range sidelobes and suppression of DOA ghosts, while maintaining flexibility in code sequence design.

0.21

A Four-Branch Radar Target Simulator with Fractional Delay on a PlutoSDR

eess.SP ·2026-11-11 ·Florian Euchner, Stephan ten Brink
code/data similarity 0.57
Abstract

Repeatable test setups support the development and evaluation of integrated sensing and communications (ISAC) hardware and algorithms. Commercial radar target simulators are expensive, while sub-6 GHz ISAC experiments often need only tens of megahertz of bandwidth within their available spectrum allocation. This makes simpler, low-cost test hardware attractive. We present a low-cost, open-source radar target simulator based on an ADALM-Pluto without hardware modification, supporting four independently configurable targets and analog bandwidths up to 56 MHz. The FPGA generates echoes with independent delays, Doppler shifts and gains, using fractional-delay filters for sub-sample adjustment. For motion-consistent echoes, delay and carrier phase are updated together to reproduce both changing range and frequency-dependent Doppler shifts. Over-the-air measurements demonstrate simultaneous echoes, sub-sample delay adjustment, and smooth target motion between sample positions. The FPGA source, firmware and on-device web interface are publicly available.

0.38

Continuous-Phase Frequency-Hopping MIMO Signaling and Processing for ISAC

eess.SP ·2026-10-16 ·Yi Wang, Xianxiang Yu, Jing Yang, Tao Fan, Linlong Wu +2 more
similarity 0.56
Abstract · 22 pages, 13 figures, including appendices

Frequency-hopping MIMO integrated sensing and communications (FH-MIMO-ISAC) supports agile multidimensional signaling but faces challenges in phase-continuous transmission, demodulation without channel-phase information, and coherent processing of multi-frequency echoes. We propose a continuous-phase frequency-hopping (CP-FH) MIMO ISAC waveform with matched communication and radar processing. Information is conveyed jointly by frequency combinations and continuous-phase-modulation symbols. CPM phase accumulation and frequency-hopping linear-frequency-modulation phase compensation maintain phase continuity and reduce spectral leakage. We derive exact inter-element orthogonality conditions, residual cross-correlation bounds, and a bound on averaged transmit-beampattern ripple. For communication, projection-energy demodulation requires no channel-phase information and approximates least-squares detection under weak inter-branch correlation. It separates frequency-combination search from CPM-symbol decisions, reducing complexity while retaining direct joint-search decisions. For radar, structure-matched coherent processing combines space-time-frequency matched filtering, velocity-consistent Doppler focusing, and frequency-aperture focusing to form a three-dimensional coarse-range--velocity--fine-range response. It reduces Doppler-mismatch loss and extra detections from periodic range grating lobes in conventional pulse-Doppler processing. We further derive the joint range response, output signal and noise powers, and receive beampattern. The analysis characterizes target-discrimination limits under periodic ambiguity and shows that the proposed processor preserves frequency-aperture range resolution and full-aperture angular resolution, with equal output noise power under the stated conditions.

0.31

AFDM-ISAC Design Amalgamating FMCW Radar and Carrier Aggregation

eess.SP ·2026-10-29 ·Qu Luo, Qihao Peng, Zihuai Lin, Maged Elkashlan, Pei Xiao +2 more
publishedhot direction similarity 0.55
Abstract

Carrier-aggregation (CA)-assisted affine frequency division multiplexing (AFDM) is conceived for integrated sensing and communication (ISAC) systems. A frequency-modulated continuous-wave (FMCW)-inspired dechirping receiver is developed to exploit the inherent pulse-compression property of AFDM chirp subcarriers for accurate delay-Doppler estimation. To further enhance sensing performance, a pair of CA schemes is proposed. The Type-I CA scheme improves sensing accuracy by aggregating echo signals across multiple CA bands prior to radar processing, thereby reducing estimation error with low hardware overhead. The Type-II CA scheme enhances range resolution by effectively enlarging the sensing bandwidth, where chirps from different CA bands are designed to form a continuous set of chirp signals. Based on this principle, variable subcarrier sensing and asynchronous sensing schemes are developed. For the communication receiver, the generalized input-output relationship of AFDM is derived under both fractional delay and fractional Doppler (FDFD) channels. To address the challenge of FDFD estimation, a cross-domain sensing-assisted channel estimation (CDS-CE) scheme is proposed to facilitate time-domain delay-Doppler parameter estimation and affine-domain channel coefficient recovery. Simulation results demonstrate that the proposed framework achieves significant improvements in sensing accuracy and resolution, as well as in channel estimation performance compared with state-of-the-art methods.

0.35

Beamfocusing Beyond the Near Field: Frequency Diverse Arrays for OFDM-ISAC Systems

cs.NI cs.ITeess.SP ·2026-10-30 ·Arda Akyazi, Ahmed Hussain, Asmaa Abdallah, Ahmed M. Eltawil, Abdulkadir Celik
hot direction similarity 0.55
Abstract · 8 pages, 5 figures. Interactive figures and code: https://akadircelik.com/demos/fda-ofdm-isac/

Traditional phased arrays (PAs) achieve near-field (NF) beamfocusing through spherical wavefront curvature, but lose this range selectivity in the far field (FF). Frequency diverse arrays (FDAs) instead introduce frequency offsets across antenna elements. These offsets synthesize a range-dependent beam whose beamdepth is governed by the aggregate frequency-offset span rather than the physical aperture, thereby extending finite beamdepth into the FF. Although FDAs have been extensively studied for radar, their broader potential for wireless communications remains largely unexplored. Accordingly, this article examines how this capability can support wireless communications and integrated sensing and communication (ISAC). We compare PA and FDA focusing mechanisms, explain FDA coupling and periodicities, and assess coexistence with orthogonal frequency-division multiplexing (OFDM). Integer-multiple offsets preserve alignment with the OFDM subcarrier grid and avoid offset-induced intercarrier interference under ideal synchronization, but require suitable symbol mapping and receiver processing. We also distinguish FDA beamdepth from waveform-based radar range resolution and discuss their complementary roles in sensing. For the configurations studied, FDAs offer no additional single-user spatial degrees of freedom. Interestingly, their principal benefit is multiuser separation through location division multiple access (LDMA). Numerical case studies under an idealized FDA channel model show that FDA-LDMA achieves higher sum-rates than PA-based schemes for users with small angular separation in the FF, even after accounting for the bandwidth reserved for frequency offsets.

0.44

2D Coprime Pilots for Delay-Doppler Sensing in OFDM-ISAC Systems

eess.SP ·2026-10-08 ·Guanping Shang, Zeyan Zhuang, Anzheng Tang, Shenghui Song, Chi-Ying Tsui
similarity 0.55
Abstract · This paper has been submitted to IEEE journal

Integrated Sensing and Communication (ISAC) is envisioned to endow future 6G systems with seamless sensing capabilities. To support efficient sensing with minimum communication overhead, sparse pilots embedded within communication frames have emerged as a promising solution. Along this line of research, existing studies have achieved engaging results in maximizing the unambiguous sensing region. However, jointly maximizing the sensing region and sensing accuracy remains challenging due to the lack of a unified performance metric and an effective pilot design framework. This paper jointly optimizes the unambiguous sensing region and sensing accuracy for estimating delay-Doppler (DD) parameters in Orthogonal Frequency Division Multiplexing (OFDM)-ISAC systems, where sensing mutual information (SMI) is adopted as a unified performance metric to characterize the overall sensing capability. Specifically, the joint optimization is formulated as an SMI maximization problem by systematically resolving sensing ambiguity and optimizing sensing accuracy. In particular, based on the generalized Bezout identity, we derive a 2D (timefrequency) coprime condition, which, as far as the authors know, is the first necessary and sufficient condition to achieve the unique estimation of DD parameters in the literature. Under this unambiguous condition, we further propose an Adam-Guided Iterative Refinement (AGIR) algorithm to optimize the sensing accuracy. Numerical results demonstrate the advantage of the proposed framework over existing designs, owing to the freedom offered by the 2D coprime condition in optimizing the sensing accuracy.

0.43