CS Paper Radar

A Four-Branch Radar Target Simulator with Fractional Delay on a PlutoSDR

Florian Euchner, Stephan ten Brink

eess.SP ·submitted 2026-11-11 16:15 UTC · v1
code/data

Abstract

Repeatable test setups support the development and evaluation of integrated sensing and communications (ISAC) hardware and algorithms. Commercial radar target simulators are expensive, while sub-6 GHz ISAC experiments often need only tens of megahertz of bandwidth within their available spectrum allocation. This makes simpler, low-cost test hardware attractive. We present a low-cost, open-source radar target simulator based on an ADALM-Pluto without hardware modification, supporting four independently configurable targets and analog bandwidths up to 56 MHz. The FPGA generates echoes with independent delays, Doppler shifts and gains, using fractional-delay filters for sub-sample adjustment. For motion-consistent echoes, delay and carrier phase are updated together to reproduce both changing range and frequency-dependent Doppler shifts. Over-the-air measurements demonstrate simultaneous echoes, sub-sample delay adjustment, and smooth target motion between sample positions. The FPGA source, firmware and on-device web interface are publicly available.

Closest papers

Nearest neighbours by meaning across the whole index.

Sensing Fast and Distant Targets in Fractional Overspread Channels with Zak-OTFS and Modular Arithmetic

eess.SP cs.IT ·2026-10-29 ·Andrea Novero, Mudasir Ahmad Sheikh, Danish Nisar, Saif Khan Mohammed, Michele Zorzi +1 more
similarity 0.62
Abstract · 14 pages, 8 figures, 4 tables

Delay-Doppler (DD) modulations, such as Zak-transform-based orthogonal time frequency space (Zak-OTFS) modulation, represent the channel as a sparse set of delay and Doppler shifts, which makes them well suited for radar sensing. Sensing with a single DD frame, however, is unambiguous only when the channel spread factor, i.e., the product of the delay and Doppler spreads, is less then one. Long-range mobility scenarios, including drones, airplanes, low Earth orbit (LEO) satellites, and underwater acoustic links, typically violate this crystallization condition, so that a single frame aliases the target delays, Doppler shifts, or both. Existing methods add a time-frequency pilot to a conventional DD frame, resolve the aliasing in only one dimension, and assume integer delays and Doppler shifts. We propose a frame design that combines multiple DD bases with different delay and Doppler periods, which together cover an overspread channel with fractional delays and Doppler shifts, using the same bandwidth and frame size. We show that modular arithmetic on the peak positions uniquely recovers each target by pairing the peaks through their common projection and their gains, and we derive the condition under which this pairing is ambiguous. We implement the design with two superimposed Zak-OTFS frames and propose two receivers: dual-frame sensing (DS), which performs the joint detection directly, and DS with cross-pilot cancellation (DS-XC), which additionally cancels the cross-pilot interference, re-estimates the gains by joint least squares, and removes ghost targets. Both receivers maintain a detection rate close to one as the spread factor grows, and DS-XC also achieves the lowest false-alarm rate and channel estimation error among all the compared systems. In a 100 km drone scenario, DS-XC outperforms all baselines, with a complexity that grows near-linearly with the time-bandwidth product.

0.22

Track-conditioned Residual Frequency Estimation For Low-resolution FMCW Radar

eess.SP ·2026-09-24 ·Huy Trinh, George Shaker
similarity 0.60
Abstract

Low-resolution FMCW radar normally forms a complete range-Doppler representation before detection and tracking. After association, however, the tracker already predicts the target's next range and radial velocity. We propose track-conditioned residual estimation (TCRE), which removes the predicted moving-target phase before spectral formation, summarizes each 64-sample chirp by four coherent complex sums, and estimates the remaining beat-frequency and Doppler-frequency errors from phase progression. We account for the first-order fast-time and slow-time coupling of a moving target and derive the local phase-unwrapping region and three-receiver local information bound. Four summaries retain 93.77 percent of the zero-residual fast-time information while reducing the retained representation by a factor of 16. In 5,000 matched 60-GHz cluttered simulations, TCRE reduces range RMSE by 32.8 to 46.3 percent and velocity RMSE by 58.6 to 71.0 percent relative to a fully specified same-prior residual ZFFT.

0.52

A Parallel Two-Stage Prony Framework for Robust Delay-Doppler Estimation

eess.SP ·2026-10-28 ·Liangchen Sun, Yutaka Jitsumatsu
similarity 0.60
Abstract

This paper addresses off-grid physical delay-Doppler parameter estimation based on an orthogonal time frequency space (OTFS) pilot waveform over doubly selective channels. Based on a known single-pilot waveform with a frequency-shifted sinc pulse structure, we propose a parallel dual-order estimation framework, in which Prony-based Doppler-first and delay-first procedures are executed concurrently and their candidate paths are jointly fused. The two estimation orders provide complementary resolution characteristics, thereby mitigating ambiguities caused by closely spaced multipath components and fractional delay--Doppler mismatch. Numerical results show that the proposed framework improves detection reliability and estimation stability compared with a single-order Prony estimator, especially in off-grid scenarios and low-to-moderate signal-to-noise ratio regimes.

0.26

AFDM-ISAC Design Amalgamating FMCW Radar and Carrier Aggregation

eess.SP ·2026-10-29 ·Qu Luo, Qihao Peng, Zihuai Lin, Maged Elkashlan, Pei Xiao +2 more
publishedhot direction similarity 0.59
Abstract

Carrier-aggregation (CA)-assisted affine frequency division multiplexing (AFDM) is conceived for integrated sensing and communication (ISAC) systems. A frequency-modulated continuous-wave (FMCW)-inspired dechirping receiver is developed to exploit the inherent pulse-compression property of AFDM chirp subcarriers for accurate delay-Doppler estimation. To further enhance sensing performance, a pair of CA schemes is proposed. The Type-I CA scheme improves sensing accuracy by aggregating echo signals across multiple CA bands prior to radar processing, thereby reducing estimation error with low hardware overhead. The Type-II CA scheme enhances range resolution by effectively enlarging the sensing bandwidth, where chirps from different CA bands are designed to form a continuous set of chirp signals. Based on this principle, variable subcarrier sensing and asynchronous sensing schemes are developed. For the communication receiver, the generalized input-output relationship of AFDM is derived under both fractional delay and fractional Doppler (FDFD) channels. To address the challenge of FDFD estimation, a cross-domain sensing-assisted channel estimation (CDS-CE) scheme is proposed to facilitate time-domain delay-Doppler parameter estimation and affine-domain channel coefficient recovery. Simulation results demonstrate that the proposed framework achieves significant improvements in sensing accuracy and resolution, as well as in channel estimation performance compared with state-of-the-art methods.

0.35

Multi-feed Plane Wave Generator for Compact OTA Multi-Target Emulation With Joint Angle-Delay-Doppler Control

eess.SP ·2026-09-30 ·Le Yu, Guangming Dong, Chunhui Li, Wei Fan
similarity 0.59
Abstract

Over-the-air (OTA) radar target emulation is an important method for evaluating the sensing capabilities of integrated sensing and communication (ISAC) and radar devices. Conventional single-feed compact antenna test ranges (CATRs) are generally limited to a single target direction, while multi-feed angular-synthesis methods commonly used in radar testing still require far-field illumination over the device-under-test (DUT) aperture. To overcome these limitations, this paper proposes a radar target OTA emulation framework based on multi-feed plane wave generator (PWG). The key capability is the simultaneous emulation of spatially close targets from different directions with joint angle--range--Doppler control. Target range is emulated through the corresponding delay, while Doppler and the complex echo coefficient are controlled by a channel emulator. Meanwhile, a multi-input amplitude and phase matrix (APM) maps each independent target-signal path to a dedicated PWG excitation vector that synthesizes the corresponding incident plane wave over the same test zone. This enables multiple target directions to be reproduced as local plane waves at a test distance substantially shorter than the conventional far-field requirement. The framework is experimentally validated at 3~GHz using a real $1\times11$ phased-array DUT. The PWG--DUT separation is 1.6~m, substantially shorter than the 7.2~m Fraunhofer distance of the DUT. At this separation, the synthesized $0^{\circ}$ and $10^{\circ}$ incident waves each exhibit an amplitude peak-to-peak error of 1.0~dB. Across two four-target angle--delay cases and one two-target angle--velocity case, the estimated target parameters show angular deviations within $1^{\circ}$, interpolated delay errors within 2.4~ns, and velocity errors within 0.15~m/s.

0.18

Multi-UAV Tracking Evaluation Using 5G Uplink Signals on an O-RAN ISAC Simulation Testbed

cs.NI eess.SP ·2026-08-11 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.57
Abstract · 25 pages, 3 figures, 12 tables

We evaluate multi-target detection, association and tracking end to end on an O-RAN simulation testbed built from OpenAirInterface, FlexRIC and Sionna RT that repurposes the 5G NR uplink sounding reference signal as a passive radar waveform, and against what a counter-UAS command-and- control (C2) consumer requires rather than by detection alone. Three UAVs differing in altitude, velocity and radar cross section (-8 to -20 dBsm) fly one bistatic pair with an 8-element planar receive array. Once every target is detected the binding limit is contention, not sensitivity - two targets share one nearest detection in about 74% of coherent processing intervals, and targets are detected far more often than they are tracked. Elevation from that array cannot separate targets sharing a range-Doppler cell, but it decides association in 58% of intervals. Concurrent tracks are exported from the RAN Intelligent Controller (RIC) xApp to a C2 fusion node over a SAPIENT interface carrying a calibrated detection confidence, validated at schema level against a mock fusion node. The evaluation is emulation-only on one geometry with 10 noise seeds, the mechanisms are characterized and analyzed to identify the key factors influencing multi-target tracking performance.

0.42

Ultra-High Resolution Method for Multipath Within a Co-Delay-Doppler Bin in DFT-P-OCDM

cs.IT ·2026-09-04 ·Mingxuan Han, Weile Zhang, Feifei Gao
similarity 0.57
Abstract

Communication systems can reuse their transmitted signals for sensing without dedicated radar transmissions. For an established DFT-preprocessed orthogonal chirp division multiplexing (DFT-P-OCDM) waveform, this task becomes difficult when several physical paths in a doubly selective channel fall into the same co-delay-Doppler bin. In this case, the number of resolvable delay classes inferred from the pilot may be smaller than the number of physical paths within the co-bin. This mismatch increases the difficulty of path number determination, fractional Doppler offset estimation, and channel reconstruction. We derive a pointwise relationship between the input and output in the DFT preprocessed Fresnel (DPF) domain for doubly selective channels with multiple paths within the co-delay-Doppler bin. Based on this input and output relation, we propose the two stage ultra high resolution (TSUR) framework. The first stage uses pilots of the phase progression to estimate delay, while the second stage uses the leakage samples to estimate the Doppler and the number of paths within each delay class. Furthermore, we derive CRLBs and analyze how the pilot configuration trades sensing resolution and communication recovery. Simulation results demonstrate that TSUR resolves same delay paths within a co-delay-Doppler bin, remains robust to exist delay offsets, and achieves lower fractional Doppler estimation errors than sequential extraction and off-grid baselines.

0.25

gr-ntnisac: An Open GNU Radio Testbed for NTN-ISAC

eess.SP eess.SY ·2026-10-08 ·Soham Dhiren Desai
published similarity 0.57
Abstract · Vol. 11 No. 1 (2026): Proceedings of the 16th GNU Radio Conference / Articles

A passive receiver can sense nearby objects from the echoes of a 5G downlink. When the transmitter is a low-Earth-orbit (LEO) satellite, one transmitter covers a wide area, but the receiver must handle tens of kHz of Doppler and a direct-path delay that changes within every observation interval. Such a receiver should be tested where the correct answer is known before it is tried on a satellite. This paper presents gr-ntnisac, an open GNU Radio testbed that applies an emulated LEO channel to a standard 5G New Radio downlink, sends it through two cabled USRPs, and scores the receiver against the delay and Doppler commanded for every path. The same receiver code runs in simulation, on recorded captures, and on hardware. As a first use, we measure cancellation of the direct path, the strong satellite signal that masks weak echoes. Depth is 34.8 dB on hardware and 37.6 dB in a matched simulation without radios, so the radios are not the main limit. Controlled simulation shows that the emulator's 8-tap fractional-delay filter and a simulated rotating blade at almost the direct path's delay each limit depth to about 40 dB; without either, depth reaches 71.0 dB. A diagnostic canceller that also removes the per-subcarrier response and per-symbol phase reaches 72.7 dB on the same captures. On a conducted capture, a payload-aided receiver detects a -25 dB moving path in 76.9 percent of dwells.

0.31