CS Paper Radar

Multi-feed Plane Wave Generator for Compact OTA Multi-Target Emulation With Joint Angle-Delay-Doppler Control

Le Yu, Guangming Dong, Chunhui Li, Wei Fan

eess.SP ·submitted 2026-09-30 07:38 UTC · v1

Abstract

Over-the-air (OTA) radar target emulation is an important method for evaluating the sensing capabilities of integrated sensing and communication (ISAC) and radar devices. Conventional single-feed compact antenna test ranges (CATRs) are generally limited to a single target direction, while multi-feed angular-synthesis methods commonly used in radar testing still require far-field illumination over the device-under-test (DUT) aperture. To overcome these limitations, this paper proposes a radar target OTA emulation framework based on multi-feed plane wave generator (PWG). The key capability is the simultaneous emulation of spatially close targets from different directions with joint angle--range--Doppler control. Target range is emulated through the corresponding delay, while Doppler and the complex echo coefficient are controlled by a channel emulator. Meanwhile, a multi-input amplitude and phase matrix (APM) maps each independent target-signal path to a dedicated PWG excitation vector that synthesizes the corresponding incident plane wave over the same test zone. This enables multiple target directions to be reproduced as local plane waves at a test distance substantially shorter than the conventional far-field requirement. The framework is experimentally validated at 3~GHz using a real $1\times11$ phased-array DUT. The PWG--DUT separation is 1.6~m, substantially shorter than the 7.2~m Fraunhofer distance of the DUT. At this separation, the synthesized $0^{\circ}$ and $10^{\circ}$ incident waves each exhibit an amplitude peak-to-peak error of 1.0~dB. Across two four-target angle--delay cases and one two-target angle--velocity case, the estimated target parameters show angular deviations within $1^{\circ}$, interpolated delay errors within 2.4~ns, and velocity errors within 0.15~m/s.

Closest papers

Nearest neighbours by meaning across the whole index.

Emulation of Closely Spaced Spatial Sensing Targets Using a Parabolic Cylindrical Compact Range with a Multi-Feed Amplitude-Phase Controlled Linear Array

eess.SP ·2026-09-14 ·Zhangzhang Jiang, Guokai Jiang, Le Yu, Chunhui Li, Zhengpeng Wang +1 more
similarity 0.72
Abstract · 14 pages, 11 figures

Integrated sensing and communication (ISAC) base stations (BSs) are emerging as critical infrastructure for 6G networks, requiring advanced over-the-air (OTA) testing methodologies that can emulate dynamic, multi-target scenarios under far field (FF) conditions. However, existing testing solutions often suffer from limited angular flexibility, insufficient bandwidth, and prohibitive costs. {To address these challenges, this paper proposes an OTA testing system that integrates a radar target simulator (RTS), a multi-port amplitude and phase modulation (APM) network, and a multi-feed linear array with a single parabolic cylindrical compact range (SPCCR).} The proposed system is capable of emulating closely spaced spatial targets with varying incident azimuth angles. This setup meets the essential conditions for ISAC BS testing, including FF characteristics, wideband and multi-band compatibility, and the capability for sensing multiple dynamic closed-spaced targets. The feasibility of the proposed method is validated through both FEKO simulation and measurement. Experimental results demonstrate that the system successfully emulates multiple closely spaced targets within an azimuth range of $\pm 10^\circ$ with high emulation accuracy while maintaining excellent quiet zone (QZ) performance.

0.25

Multi-UAV Tracking Evaluation Using 5G Uplink Signals on an O-RAN ISAC Simulation Testbed

cs.NI eess.SP ·2026-08-11 ·Arun K. Gurung, Satha K. Sathananthan
similarity 0.59
Abstract · 25 pages, 3 figures, 12 tables

We evaluate multi-target detection, association and tracking end to end on an O-RAN simulation testbed built from OpenAirInterface, FlexRIC and Sionna RT that repurposes the 5G NR uplink sounding reference signal as a passive radar waveform, and against what a counter-UAS command-and- control (C2) consumer requires rather than by detection alone. Three UAVs differing in altitude, velocity and radar cross section (-8 to -20 dBsm) fly one bistatic pair with an 8-element planar receive array. Once every target is detected the binding limit is contention, not sensitivity - two targets share one nearest detection in about 74% of coherent processing intervals, and targets are detected far more often than they are tracked. Elevation from that array cannot separate targets sharing a range-Doppler cell, but it decides association in 58% of intervals. Concurrent tracks are exported from the RAN Intelligent Controller (RIC) xApp to a C2 fusion node over a SAPIENT interface carrying a calibrated detection confidence, validated at schema level against a mock fusion node. The evaluation is emulation-only on one geometry with 10 noise seeds, the mechanisms are characterized and analyzed to identify the key factors influencing multi-target tracking performance.

0.42

A Four-Branch Radar Target Simulator with Fractional Delay on a PlutoSDR

eess.SP ·2026-11-11 ·Florian Euchner, Stephan ten Brink
code/data similarity 0.59
Abstract

Repeatable test setups support the development and evaluation of integrated sensing and communications (ISAC) hardware and algorithms. Commercial radar target simulators are expensive, while sub-6 GHz ISAC experiments often need only tens of megahertz of bandwidth within their available spectrum allocation. This makes simpler, low-cost test hardware attractive. We present a low-cost, open-source radar target simulator based on an ADALM-Pluto without hardware modification, supporting four independently configurable targets and analog bandwidths up to 56 MHz. The FPGA generates echoes with independent delays, Doppler shifts and gains, using fractional-delay filters for sub-sample adjustment. For motion-consistent echoes, delay and carrier phase are updated together to reproduce both changing range and frequency-dependent Doppler shifts. Over-the-air measurements demonstrate simultaneous echoes, sub-sample delay adjustment, and smooth target motion between sample positions. The FPGA source, firmware and on-device web interface are publicly available.

0.30

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

eess.SP ·2026-10-12 ·Zhenkun Zhang, Cunhua Pan, Hong Ren, Jun Tang, Dongming Wang +1 more
theory similarity 0.56
Abstract

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

0.12

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.56
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

Delay-Doppler Sensing Performance Analysis for MIMO-OFDM ISAC Systems

eess.SP ·2026-09-01 ·Peishi Li, Rang Liu, Qian Liu, Ming Li
published similarity 0.55
Abstract · Accepted by IEEE Globecom 2026

In communication-centric integrated sensing and communication (ISAC), delay-Doppler sensing reuses data-bearing orthogonal frequency division multiplexing (OFDM) signals rather than dedicated radar probing waveforms. Consequently, the resulting range-Doppler map (RDM) is shaped not only by target parameters, but also by communication-symbol randomness and, in multi-antenna transmissions, by spatial beamforming. While existing analyses have largely focused on single-antenna OFDM-ISAC, the delay-Doppler sensing behavior of multi-antenna OFDM-ISAC remains insufficiently understood. This paper analyzes a multi-input multi-output (MIMO)-OFDM-ISAC system in which multiple data streams jointly illuminate a sensing target. We derive second-order moment expressions for the RDM under matched filtering (MF) and reciprocal filtering (RF), and use them to characterize the dynamic range (DR). The analysis reveals two key multi-stream effects. First, under MF, the random superposition of multiple beamformed streams creates an additional RDM floor beyond the modulation-dependent and receiver-noise terms; therefore, constant-modulus signaling no longer eliminates the data-induced pedestal as in single-antenna OFDM-ISAC. Second, under RF, the matched-angle data-induced floor is removed, but the noise floor is amplified according to the reciprocal-power statistics of the beamformed target illumination. These results show that the user-target angular geometry directly governs the MF/RF tradeoff: MF is more robust under weak illumination, whereas RF can achieve a higher DR when reciprocal-noise amplification is mild. Numerical results validate the analysis and demonstrate the distinct geometry-dependent behaviors of MF and RF.

0.14

Beamfocusing Beyond the Near Field: Frequency Diverse Arrays for OFDM-ISAC Systems

cs.NI cs.ITeess.SP ·2026-10-30 ·Arda Akyazi, Ahmed Hussain, Asmaa Abdallah, Ahmed M. Eltawil, Abdulkadir Celik
hot direction similarity 0.55
Abstract · 8 pages, 5 figures. Interactive figures and code: https://akadircelik.com/demos/fda-ofdm-isac/

Traditional phased arrays (PAs) achieve near-field (NF) beamfocusing through spherical wavefront curvature, but lose this range selectivity in the far field (FF). Frequency diverse arrays (FDAs) instead introduce frequency offsets across antenna elements. These offsets synthesize a range-dependent beam whose beamdepth is governed by the aggregate frequency-offset span rather than the physical aperture, thereby extending finite beamdepth into the FF. Although FDAs have been extensively studied for radar, their broader potential for wireless communications remains largely unexplored. Accordingly, this article examines how this capability can support wireless communications and integrated sensing and communication (ISAC). We compare PA and FDA focusing mechanisms, explain FDA coupling and periodicities, and assess coexistence with orthogonal frequency-division multiplexing (OFDM). Integer-multiple offsets preserve alignment with the OFDM subcarrier grid and avoid offset-induced intercarrier interference under ideal synchronization, but require suitable symbol mapping and receiver processing. We also distinguish FDA beamdepth from waveform-based radar range resolution and discuss their complementary roles in sensing. For the configurations studied, FDAs offer no additional single-user spatial degrees of freedom. Interestingly, their principal benefit is multiuser separation through location division multiple access (LDMA). Numerical case studies under an idealized FDA channel model show that FDA-LDMA achieves higher sum-rates than PA-based schemes for users with small angular separation in the FF, even after accounting for the bandwidth reserved for frequency offsets.

0.44

Range Ambiguity Identification and Elimination by Leveraging Temporal Broadening Effect for THz Sensing

eess.SP ·2026-10-14 ·Saira Rafique, Ahmed Naeem, Chong Han, Huseyin Arslan
similarity 0.55
Abstract · Submitted to IEEE Transactions on Vehicular Technology (TVT); currently under review

High pulse repetition frequency (PRF) operation improves Doppler unambiguous sensing but reduces the maximum unambiguous range of a terahertz (THz) pulsed radar. Echoes from targets beyond this range can be incorrectly associated with subsequent transmitted pulses, causing the targets to appear at shorter ranges. This paper proposes a receiver-side framework that exploits the THz-specific temporal broadening effect as a distance-dependent signature to resolve range ambiguity. For each detected echo, the receiver applies broadening-matched filtering with references corresponding to candidate target ranges. The filter outputs are combined across pulses with Doppler compensation, and the largest normalised combined response identifies the ambiguity order needed to recover the true target range. The selected reference is then reused to reduce mismatch loss in subsequent range and velocity estimation. Simulations under known atmospheric conditions, with targets occupying distinct apparent-delay bins, demonstrate reliable range recovery beyond the conventional unambiguous interval. Range estimation errors conditioned on correct ambiguity-order identification, together with the reported velocity estimation errors, approach their corresponding derived Cramér--Rao bounds. The method preserves a fixed transmitted pulse shape, PRF, and sampling rate, at the expense of a higher signal-to-clutter-plus-noise ratio requirement for ambiguity identification relative to the evaluated diversity-based techniques.

0.25