CS Paper Radar

Force-Based Offset Estimation for Keyed Peg-in-Hole Assembly Using Local Gaussian Process Regression

Chandra Yuvesh Aubeeluck, Abilash Philip Madavath, Augustin Raju, Nicolas Pyschny, Felix Hackelöer, Florian Zwanzig

cs.RO ·submitted 2026-08-18 12:06 UTC · v1
publishedhot direction

Abstract

Key-keyway assembly tasks impose strict geometric constraints and are highly sensitive to grasp pose deviations in uncertain environments. This work presents a force-based offset estimation method for keyed peg-in-hole assembly, embedded within a perception-validation-insertion pipeline. Residual misalignment is estimated directly from wrist force/torque measurements using a local KNN-Gaussian Process hybrid regressor. The framework distinguishes between two contact regimes, hard collision and guided chamfer insertion, and routes inference to a dedicated model for each. Regime classification is achieved via a contact-window duration threshold. KNN combined with a deterministic search using the results of a post-grasp monocular visual validation contributes to an increased accuracy of the regressor model. This approach achieves accurate radial offset estimation in chamfered peg insertion, during a keypoint detection-based pick and place application. Experiments using the integrated force/torque sensor of a collaborative robot arm showed an increase in insertion success rate from 67% to 87% after the pipeline was applied.

Comment
6 pages, 11 figures. Accepted and presented at the 2026 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2026), Genova, Italy. Awaiting publication in IEEE Xplore

Closest papers

Nearest neighbours by meaning across the whole index.

ContactDP: Contact-Guided Diffusion Policy for Tight Insertion Tasks

cs.RO ·2026-09-20 ·Chengyi Xing, Shaoxiong Yao, Diego Romeres, Devesh K. Jha
hot direction similarity 0.67
Abstract · 8 pages, 5 figures

High-precision connector insertion remains challenging for robotic systems due to tight mechanical tolerances, partial observability during contact, and multimodal uncertainty arising from occlusion and contact ambiguity. Successful insertion requires closed-loop contact guidance that continuously integrates global alignment cues with local contact feedback to produce stable corrective actions under interaction. In this work, we present ContactDP (Contact-Guided Diffusion Policy for Tight Insertion Tasks), a multimodal diffusion-policy framework for contact-rich insertion. ContactDP jointly integrates wrist RGB observations, fingertip tactile sensing, and wrist-mounted force-torque measurements to infer contact state and generate temporally consistent corrective motions during insertion. To ensure stable execution under contact, the learned policy operates together with a hybrid position-force controller that provides compliant low-level interaction. We evaluate our approach on a suite of industrial-grade connector insertion tasks with varying connector geometries, grasp conditions, and initial misalignment. Across all tasks, ContactDP significantly outperforms vision-only diffusion policies for performance, reliability and generalization.

0.30

Force/Torque-Based Kinematic Adaptation for Robotic Manipulation Tasks

cs.RO ·2026-08-21 ·Carl Glen Henshaw
hot direction similarity 0.66
Abstract · 29 pages including appendices, 3 figures

Contact-rich robotic manipulation requires an accurate model of the kinematic relationship between a robot's joints and the task features it senses. This relationship is rarely known exactly: it changes with each tool the robot picks up and shifts, sometimes almost instantaneously, as contact modes change --- especially for multi-fingered hands that make and break contact at points that are not exactly prescribed, as in full-hand grasping. This paper develops an adaptive scheme that estimates that relationship online, using only joint-angle sensing and a wrist-mounted force/torque sensor, with no exteroceptive measurement of the tool tip. We derive a provably stable kinematic update law that identifies the kinematics of an unknown tool from force/torque feedback alone, and prove stability of both the rigid case and the case with a compliance controller as an inner loop. We show that identification is confined to the directions the motion excites --- so that, for example, a tool's length is unobservable under a rigid insertion push, while a compliant loop's passive yielding partially excites it; and that with a second-order admittance the compliant certificate holds unconditionally in continuous time. We also pose the combined control and estimation problem as a Quadratic Program (QP): the formulation yields the prediction term of the update law exactly but, instructively, cannot reproduce the tracking adaptation term. We validate the scheme in simulation on a peg-in-hole insertion. This work is the first step in a research program aimed at factoring manipulation learning into a task policy which can be learned in isolation of the robot, for instance by reinforcement learning, and an adaptive kinematic component that adapts online to the particular robot, hand, or tool in use.

0.29

Task aware Dynamic Movement Primitives for failure detection and recovery in contact rich manipulation

eess.SY cs.RO ·2026-09-19 ·Bhavnashri A, Sobia Shafi, Krishnapuram Himavarshini, Anuj Tiwari
similarity 0.66
Abstract · 7 pages, 10 figures

Assembly remains a challenging robotic manipulation task in presence of tight tolerances and complex contact interactions. While Learning from Demonstration (LfD) frameworks like Dynamic Movement Primitives (DMPs) can effectively encode trajectories from a single demonstration, they are highly sensitive to variations in initial grasp configurations and external contact forces. Such variations often lead to task failures during the contact rich phases. This paper presents a task aware failure detection and recovery framework that integrates DMP based trajectory generation with real time stage classification. Utilizing Quadratic Discriminant Analysis (QDA) trained on multimodal sensor data, the framework segments execution into approach, alignment, and insertion stages for a Peg in Hole (PiH) assembly operation. By using goal relative position data as features, this classification generalizes to unseen goal positions without requiring retraining, matching the inherent generalization capability of DMPs. Anomaly detection is performed online using a Mahalanobis distance metric computed over force features, isolating contact induced failures from nominal trajectory execution. Upon failure detection, a spiral search recovery policy is triggered to actively realign the peg under contact before resuming the learned DMP insertion. The proposed approach is evaluated on an experimental setup achieving 95% stage classification accuracy, and demonstrates reliable failure recovery under lateral misalignments of up to 3 mm using only a single demonstration.

0.23

Relative Contact Velocity-Controlled Hand-Object Mechanism for Dexterous Tool Manipulation

cs.RO ·2026-09-22 ·Sunyu Wang, Jean Oh, Nancy S. Pollard
hot direction similarity 0.63
Abstract

This work investigates how to enable general multi-finger robotic hands to perform the complete tool manipulation process, which entails picking up a tool, loading it into a suitable pose, and then wielding it. Inspired by human tool manipulation and mechanical design principles, we model the hand and the tool as a unified hand-object mechanism (HOM) composed of sub-assemblies. Specifically, we define a HOM as consisting of the hand, the object, and the generalized contact frames, allowing the HOM's motions to be expressed with the same set of Cartesian-space relative contact velocities, irrespective of the hand's kinematics and geometry. Then, we define a HOM's sub-assemblies as relative contact velocity and contact force constraints between fingers. Building on these definitions, we developed a lightweight and physically interpretable motion planning and contact estimation framework using least squares and a complementary filter. We evaluated our framework in simulation by teleoperating five different robotic hands. The results show that our framework enabled all five hands to execute the complete tool manipulation process, achieving dexterous behaviors even from identical, simple reference trajectories. Furthermore, the results showcase our framework's adaptability to different hands, tools, and tasks, enabled by its kinematic and geometric foundation. Please visit website for videos: \href{https://sunyuw.github.io/hom-sim/}{https://sunyuw.github.io/hom-sim/}

0.33

InsertAnything: Generalizable Contact-Rich Precision Insertion from Simulation to Reality

cs.RO ·2026-09-21 ·Zhenghua Ma, Xinpan Meng, Zeyu Liu, Muyuan Ma, Hengdi Zhang +2 more
benchmarkcode/data similarity 0.63
Abstract

Contact-rich precision insertion is a key manipulation skill in robotic assembly. Tight clearances make insertion more sensitive to alignment errors and prone to collisions and jamming, while variations in geometry and clearance across parts further complicate policy reuse. We present a reinforcement learning framework that trains insertion policies entirely in simulation for direct deployment without real-world demonstrations or policy fine-tuning. By combining target poses with compact three-dimensional fingertip force feedback, the policy learns to search for alignment and correct its motion despite errors in the estimated hole position. A decoupled gated reward coordinates alignment and insertion. Force-signal smoothing and state-independent standard deviations stabilize the learning process. The resulting policies perform real-world insertion across multiple hole geometries with a minimum nominal clearance of 0.02 mm and improve success while reducing peak contact forces under hole-position errors. Cross-clearance and cross-geometry evaluations further confirm policy generalization. The system achieved the first perfect score of 20/20 on ManipulationNet's peg-in-hole benchmark under its Human-in-the-Loop protocol, with fully autonomous insertion motions. A single policy trained only on a simulated hexagonal insertion task achieved an overall success rate of 95.0% across eight unseen real-world insertion tasks. These results show that learning entirely in simulation can yield precision insertion skills that can be deployed directly and reused across real-world tasks. The project website (https://mzhsoul.github.io/InsertAnything/) provides open-source simulation and real-robot experiment scripts, assets, and trained checkpoints.

0.35

Tactile Sensing-based Secure and Gentle Grasping of Unknown Objects

cs.RO ·2026-10-08 ·Feng Han
similarity 0.63
Abstract

Reliable robotic manipulation requires maintaining a firm grasp while strictly avoiding both contact slip and structural damage to the object. Satisfying these inherent \textit{secure-and-gentle} grasping constraints is challenging for unknown objects. We present a novel online data-driven predictive control framework for safe dynamic robotic grasping of unknown objects. The proposed system features a pair of compact, single-channel tactile-sensing modules that characterize the gripper-object dynamic interaction in real time, entirely bypassing the need for prior knowledge or offline training. A finite-state-machine-based grasping force probing mechanism is developed to establish the initial grasping force and explicitly identify grasping force constraints. Through online dynamics learning, a Gaussian Process (GP) model captures gripper-object interaction dynamics. The model uncertainties are further used to form robust grasping constraints, which are embedded into a model predictive control scheme. We demonstrate error convergence in a probabilistic sense. The proposed control framework runs at 100~Hz in real time to dynamically manipulate and handle objects rather than static holding. Extensive experimental evaluations across diverse contact surface topologies and various types of objects validate superior performance and efficiency compared to baseline strategies. The proposed method is able to manipulate objects ranging from delicate items, such as raw tofu and marshmallows, to rough objects, such as rocks.

0.08

CW-WAM: A Structured Contact-Wrench World Action Model for Force-Sensitive Manipulation

cs.RO ·2026-10-21 ·Houzhu Ding, Xinda Qi, Luqi Wang, Ming Yang
similarity 0.62
Abstract · Project website: https://cw-wam-project.github.io/

Force-sensitive manipulation requires contact and load information that is not provided explicitly by visual observations. We present CW-WAM, a world action model that jointly predicts video, motion, and contact wrench. Inspired by hybrid motion-force control, it contains a unified interaction module that treats both motion and contact wrench as modeling targets and predicts time-aligned motion-wrench chunks as control references. A pair-causal attention mechanism structures the motion-wrench dependencies, while a long fixed-length wrench memory retains past interaction information. The predicted wrench chunk acts as a force reference for a 20-Hz outer-loop admittance controller within a slow-fast control system that maintains force feedback and smooth motion between model queries. CW-WAM improves contact prediction and increases the insertion success rate from 25% to 70% for square pegs with 1-mm clearance per side and from 40% to 95% for power adapters, compared with WAM without wrench input. It also improves lifting-height accuracy across different loads. Our framework with an admittance controller reduces force-reference RMSE from 4.8 to 2.7 N for peg insertion and from 2.0 to 1.3 N for wiping, respectively, with smaller force fluctuations during successful execution. Project website: https://cw-wam-project.github.io/

0.16

Blind Precise Assembly: Proprioceptive Sim-to-Real Peg-in-Hole for Diverse Parts

cs.RO ·2026-10-16 ·Antonia Bronars, Younghyo Park, Kushal Kedia, Pulkit Agrawal
code/data similarity 0.62
Abstract · 21 pages, 15 figures, 7 tables. Antonia Bronars and Younghyo Park contributed equally. Project page: https://younghyopark.me/blind-proprioce…

Every robot already carries high-resolution contact sensors: its own joints. Legged robots and humanoids exploit them to walk, run, and track whole-body motions without vision, but there the contacts are large and forceful. Is joint sensing also enough for precise, contact-rich assembly, where the robot must find a millimeter-scale opening, mesh gear teeth, or catch a thread through light contact? We study this question by training blind assembly policies that observe only a short history of joint positions, velocities, and their own actions, without visual, force, torque, or tactile sensing. The poses of both the fixture and the part are unknown to the policy, and the grasp is randomized substantially. The policy must therefore assemble the parts through contact, sensed exclusively through its own proprioception. Trained with reinforcement learning entirely in simulation over randomized parts, grasps, and contacts, such policies learn peg insertion, gear meshing, and nut threading. The peg insertion policy transfers zero-shot to the real world and inserts pegs of different shapes and sizes in 73% of trials. Controlled comparisons with matched visual policies in simulation show that blind policies generalize far better to unseen part shapes and sizes, though they can be slower. Training such policies needs thousands of different assemblies, each simulated with its clearance intact, so we also release an open-source generator that builds them procedurally from exact convex pieces for MuJoCo; it is more accurate and faster than convex decomposition or MuJoCo's signed-distance collision. Videos and interactive simulations are at https://younghyopark.me/blind-proprioceptive-assembly/.

0.48