CS Paper Radar

Automated ACL Footprint Identification Using 3D Deep Learning

Ruida Cheng, Gabriel Gibson, Ali Uneri, Frances T. Sheehan, Barry Boden

cs.CV ·submitted 2026-08-18 17:01 UTC · v2

Abstract

One of the most common reasons for anterior cruciate ligament (ACL) reconstruction failure is femoral tunnel malpositioning (ACL footprint center and tunnel orientation). Such failures may lead to the development of meniscal pathology and osteoarthritis. Accurate ACL femoral footprint identification is therefore essential for precise tunnel placement, restoration of the native knee joint mechanics, post-surgical knee joint health and prevention of graft failure. Recent advances in artificial intelligence (AI) bring new opportunities to improve image-guided orthopedic surgery. However, at present, existing AI research focuses primarily on ACL segmentation and rupture classification based on pre- and post-operative magnetic resonance (MR) images. Identification of the ACL footprint center using deep learning methods has not been thoroughly researched. Thus, the purpose of this study is to explore 3D deep learning models for ACL femoral footprint identification directly from 3D MR images. Two comprehensive 3D deep learning architectures were developed: a 3D graph convolutional neural network-based geometric model applied to 3D femoral meshes; and a 3D landmark-enhanced identification model based on 3D MR images. A total of 4883 right and 3087 left knee image sets were used from a publicly available database. Eighty percent (80%) were applied to model generation, and twenty percent (20%) were preserved for model testing. Both models achieved excellent performance; however, the image-based method outperformed the model-based method (average error of 2.1mm vs 2.8 mm). Thus, 3D deep learning provides a feasible clinical approach for ACL footprint localization and has the potential to improve ACL reconstruction footprint accuracy.

Comment
10 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Element-Wise Femoral Stress Prediction: A Hybrid Graph Neural Network Surrogate for Finite Element Analysis

cs.LG ·2026-11-18 ·Sikha O K, Abdollah Moslemi, Elham Alizadeh, Ludovic Humbert, Miguel A. Gonzalez Ballester +1 more
code/data similarity 0.66
Abstract · This paper is submitted to Frontiers in Artificial Intelligence

Hip fractures represent a significant clinical challenge because they cause excess disability and mortality, and have a growing incidence in aging populations, as bone fragility increases. Although finite element analysis (FEA) provides biomechanical assessment of femoral strength, its clinical applicability is mainly limited by high computational cost. Conventional machine learning (ML) approaches have been explored as surrogate models for FEA; predictions are fast but fail to capture the spatial and topological structure of finite element meshes. To address these limitations, this study proposes a hybrid Graph Neural Network (GNN)-based framework for femoral stress prediction using graph-structured finite element modeling (FEM) data. The proposed GCN-SAGE-Residual architecture combines graph convolution, neighborhood aggregation, and residual learning to model spatial dependencies and stress propagation across mesh elements. We systematically evaluated 14 models in a primary comparison, spanning classical ML methods and baseline GNN architectures, complemented by a targeted architectural ablation that isolates the contribution of each component of the proposed design. Evaluation results demonstrate that the proposed hybrid architecture achieves the strongest predictive performance among all evaluated models. The proposed hybrid model achieves the best performance with an R^2 score of 0.8022 and mean absolute error of 2.879 MPa, highlighting the importance of incorporating mesh topology in biomechanical prediction tasks. The proposed framework provides a scalable and computationally efficient alternative for FEM-based orthopedic analyses and fracture risk assessment. The code is publicly available on GitHub.

0.34

A4-MR: Abnormality Aware Anatomical Alignment for MR

cs.CV ·2026-10-09 ·Noel D'souza, Zhijian Yang, Nishank Singla, Pranay Doshi, Krisztian Koos +13 more
similarity 0.63
Abstract

Recent advances in large-scale foundation models have enabled strong generalization across a wide range of clinical and research tasks in magnetic resonance imaging (MRI). However, existing vision-language MRI models remain limited in anatomy-specific localization and pathology-aware representation, particularly in real-world settings. We introduce A4-MR, a 3D vision-language foundation model trained on approximately 50,000 MRI studies comprising 491,000 series, roughly half of which are paired with radiology reports. A4-MR is designed to: (1) learn anatomy localization through large-scale pretraining with noisy labels; (2) align image and text representations at the anatomical level; and (3) learn distinct representations of healthy and abnormal anatomy. Across a diverse set of downstream tasks, A4-MR outperforms existing foundation models, including a +1.7 AUROC improvement over MedSigLIP for abnormality detection. Using a frozen encoder, A4-MR also surpasses an end-to-end task-specific MedNeXt model for knee segmentation by +1.4 Dice and performs comparably to the best task-specific model for abdominal organ segmentation on AMOS, within 0.4 Dice. Finally, without anatomical prompts, A4-MR localizes 3D anatomy comparably to MedSAM2 provided with ground-truth bounding boxes. Together, these results demonstrate that anatomy-level multimodal alignment and abnormality-aware representation learning can enable a single MRI foundation model to support localization, segmentation, and pathology-related tasks.

0.12

KneePreM: Towards 3D Knee MRI Foundation Models via Large-Scale Unlabeled Pretraining and Label-Efficient Fine-Tuning

cs.CV ·2026-09-25 ·Xinxin Wang, Liam Hazan, Jing Li, Simona Rabinovici-Cohen, Xiaojuan Li +1 more
similarity 0.62
Abstract

Background: Large volumes of unlabeled knee MRI scans are available across repositories but remain insufficiently leveraged. We developed KneePreM, a knee-specific 3D self-supervised model, and evaluated transfer and label efficiency for classification and segmentation. Methods: A 3D U-Net masked autoencoder was pretrained on 19,011 unlabeled Osteoarthritis Initiative (OAI) MRI series from 4,791 participants. Downstream fine-tuning used full and reduced training sets for fastMRI+ two-label classification (1,172 examinations), Arthroscopic Partial Meniscectomy (APM) eight-target classification (1,716 examinations), SKM-TEA segmentation (155 examinations), and APM segmentation (25 examinations). Baselines were random initialization and SuPreM. Deployment workflow was implemented with a Model Context Protocol interface. Evaluation metrics included balanced accuracy, F1 score, ROC AUC, PR AUC, and Dice score. Statistical analysis used bootstrap confidence intervals and paired bootstrap tests for classification and Wilcoxon signed-rank tests for segmentation. Results: KneePreM achieved higher full-data macro ROC AUC than both baselines for fastMRI+ and APM (all p < .001). For fastMRI+ classification, KneePreM achieved a ROC AUC of 0.722 using 50% of the training data, exceeding both full-data baselines. In APM classification, KneePreM reached a ROC AUC of 0.740 with 70% of the data, matching the full-data random baseline and outperforming SuPreM. For SKM-TEA segmentation, its 70%-data Dice of 0.838 exceeded the full-data random baseline (0.835) and both same-budget comparators. In APM segmentation, its 75%-data Dice of 0.746 exceeded the full-data random baseline (0.731) and both same-budget comparators. Conclusion: KneePreM improves transfer performance and label efficiency across knee MRI classification and segmentation tasks, particularly when labeled training data are limited.

0.34

3D Reconstruction from Arthroscopic Images using NeRF: a preliminary in-silico study

eess.IV ·2026-09-30 ·Hermine Kitio Tsamo, Agathe Yvinou, Daniel Pizarro, Samad Barri Khojasteh, Alexandre Tronchot +4 more
published similarity 0.60
Abstract

In knee arthroscopy surgery, accurate registration between preoperative and intraoperative anatomy is a critical step for patient-specific navigation. Achieving an accurate registration requires a reliable 3D reconstruction of the joint during surgery. Preoperative 3D models can be obtained from patient imaging through segmentation and reconstruction, but generating an intraoperative 3D representation remains particularly challenging. Arthroscopic imaging suffers from a limited field of view, low surface texture, and strong specular reflections, which make conventional feature-based 3D reconstruction methods unreliable. In this work, we investigate the application of MIS-NeRF (Minimally-Invasive Surgery Neural Radiance Fields) for reconstructing intraoperative knee 3D models from monocular arthroscopic images. The approach is evaluated on six simulated arthroscopic acquisitions representing six patient-specific knee 3D models. Both qualitative and quantitative results are presented to assess the reconstruction quality. The reconstructed knee 3D models were evaluated through their rendered images, achieving PSNR (Peak Signal-to-Noise Ratio) of 31.88 $\pm$ 2.82, SSIM (Structural Similarity Index) of 0.98 $\pm$ 0.004 and LPIPS (Learned Perceptual Image Patch Similarity) of 0.017 $\pm$ 0.006. These preliminary results suggest the feasibility of NeRF-based reconstruction in the challenging context of arthroscopy and may represent a promising step toward accurate in-silico preoperative-to-intraoperative 3D registration for computer-assisted orthopedic surgery. Further, validation on real arthroscopic data will be necessary to assess clinical applicability.

0.37

Evaluating Anterior Cruciate Ligament Risk of Injury Using a Graph Convolutional Autoencoder

cs.CV ·2026-11-06 ·Athanasios Babouras, Paul A. Martineau, Thomas Fevens
similarity 0.59
Abstract · 14 pages, 9 figures

Current solutions for assessing the risk of anterior cruciate ligament (ACL) injury typically rely on expensive motion-capture labs that require substantial resource investment or subjective evaluations of specific athletic stress tests by experts. The Drop Vertical Jump (DVJ) and the Single Leg Hop (SLH) are two examples of such tests typically used to track progress in ACL rehabilitation. In this paper, we develop an unsupervised learning model that runs entirely on a smartphone for two tasks, based on an autoencoder architecture with multiple layers of graph convolutional networks, which utilizes pose estimation data to determine a person's injury risk status. Our model accurately predicts athletes at high risk of injury for both athletic stress tests, with average sensitivities and specificities of 78% and 78% for the DVJ, and 75% and 74% for the SLH. Our findings support the development of a widely accessible smartphone solution for real-time screening of ACL injury risk.

0.32

SA-Profile: Automated Sulcus Angle Profiling from Super-Resolution MRI

cs.CV cs.AI ·2026-09-09 ·Michael Wehrli, Leo Widmer, Edwin Li, Noel Fiechter, Lorenzo Pettinari +3 more
publishedcode/data similarity 0.58
Abstract · Accepted at MICCAI endorsed Event MICAD 2026

Trochlear dysplasia (TD) is an abnormality of the femoral trochlea associated with anterior knee pain and patellar instability. The sulcus angle (SA) is used to assess trochlear morphology, but it is typically measured on a single axial MR slice with no clear guidance on which to select, making it sensitive to slice selection and landmark placement. We propose an automatic framework for continuous SA profiling from super-resolved MR volumes. Clinically acquired axial, coronal, and sagittal MR scans are combined using implicit neural representations to reconstruct a high-resolution volume. SA measurements are computed across the trochlear region using two landmark detection U-Net models. The approach was evaluated on the public fastMRI dataset and a small in-house cohort of patients with TD. Compared with conventional manual single-slice SA measurements, the proposed automated method yielded a mean absolute error of 11.6$^\circ$ while providing continuous characterization of trochlear morphology. Population-level analysis demonstrated distinct mean SA profiles between the public cohort and the in-house TD cohort, highlighting the potential of profile-based assessment to characterize TD. By reducing reliance on a single manually selected axial slice, the proposed framework extends conventional SA assessment to a continuous profile-based description of trochlear morphology without additional imaging, while remaining conceptually linked to current clinical assessment. Further validation is required. The code is available: https://github.com/wehrlimi/SA_Profile.

0.57

Knee3DVLM: Dual-Sequence Full-Volume Vision-Language Modeling for Comprehensive Knee MRI Assessment

cs.CV cs.AI ·2026-10-06 ·Maryam Baizhigitova, Andrew Seohwan Yu, Po-Hao Chen, Naveen Subhas, Sixu Chen +5 more
similarity 0.58
Abstract · 11 pages, 2 figures, 5 tables

Vision-language models (VLMs) are increasingly being applied to three-dimensional medical imaging, but their application to knee MRI remains limited, particularly for interpreting the complementary sequences used in clinical practice. We introduce Knee3DVLM, a sequence-aware VLM that uses full-volume DESS and fluid-sensitive TSE MRI to predict 57 anatomically resolved binary diagnostic targets derived from the MRI Osteoarthritis Knee Score (MOAKS) for structured reporting. We evaluated DESS-only, TSE-only, and paired DESS-TSE configurations using subject-disjoint Osteoarthritis Initiative partitions. In a held-out cohort of 1,074 examinations, the fused model achieved 72.98% average accuracy, 71.17% balanced accuracy, 78.96% mean ROC-AUC, and 78.74% macro ROC-AUC, the highest values among the three configurations. In a secondary multiclass analysis aligned with the released 3DReasonKnee cohort, Knee3DVLM was numerically higher than the strongest reported 3DReasonKnee configuration across five pathology categories. These findings support dual-sequence full-volume modeling for comprehensive knee MRI assessment.

0.23

A Joint 2D-3D Statistical Shape Model for Orthopedic Reconstruction

cs.CV ·2026-09-08 ·Florence Dell'Aniello Picard, Pranav Poudel, Nairouz Shehata, Frédéric Lavoie, Herve Lombaert
publishedcode/data similarity 0.58
Abstract · Accepted to MICCAI Workshop on Shape in Medical Imaging (ShapeMI)

Three-dimensional femoral reconstruction from radiographs supports surgical planning, implant sizing, and post-operative follow-up, but remains ill-posed as X-ray projections discard depth information. Existing methods often incorporate a 3D statistical shape model (SSM) as a shape prior to guide reconstructions toward anatomically plausible shapes, relying on iterative 3D-to-2D projection matching. Yet, these approaches are computationally expensive and constrain their SSM to a single dimensionality, leaving the statistical relationship between 2D observations and 3D geometry largely unexploited and unexplored. We instead propose a joint 2D-3D SSM that explicitly captures the co-variation between 2D and 3D segmentations in a shared latent space. During training, 2D and 3D segmentations are registered to a common 3D template and its corresponding 2D projections, and the resulting stationary velocity fields are jointly decomposed using principal component analysis (PCA). This joint modeling allows the 2D-to-3D mapping to be learned directly from data rather than computing correspondences at inference time. For unseen subjects, the 3D shape is recovered directly by lifting the 2D latent coordinates to the 3D PCA subspace, thereby eliminating the need for iterative 3D-to-2D projection. Experiments on NMDID demonstrate that the proposed joint 2D-3D SSM outperforms a widely-used 3D-only SSM baseline while achieving inference approximately 4 times faster, at under 3 seconds per subject. The code is available at: https://github.com/florence-dellaniello-picard/joint2d3d-ssm.

0.42