CS Paper Radar

Pattern Multiplication Underestimates the Sidelobe Level of a Planar Slotted-Waveguide Array by 1.1 to 2.8 dB Across a 2% Band

William Khalili

eess.SP ·submitted 2026-08-21 15:38 UTC · v1

Abstract

The standard shortcut in slotted-waveguide array design -- solve one radiating stick, multiply its embedded pattern by the array factor of the intended aperture distribution, and accept the product as the array pattern -- is tested against a full-wave solution of the same metal. For a 16x16-slot planar array in WR-90 synthesised to a -30 dB Taylor illumination, the shortcut underestimates the transverse-plane sidelobe level by 1.06 dB at the design frequency and by 2.22 and 2.84 dB at the edges of a 2% band: a spread of 1.78 dB, larger than the mid-band error itself. Every sidelobe figure carries +/-0.11 dB of mesh spread from a convergence study on the production geometry. The error is signed, is worst at the band edges where the design has least margin, and falls only from 1.58 dB to 1.06 dB when the aperture is doubled from eight sticks to sixteen, which identifies the edge elements as its source. The array was made analysable by a thirteen-point single-slot full-wave calibration: over the design's offset range the handbook closed form for resonant length moves 3.9 micrometres where the measurement moves 143.9 micrometres, and Stevenson's conductance is shown to overestimate by a nearly constant 5.16%.

Closest papers

Nearest neighbours by meaning across the whole index.

Analysis and Approximation of Spatially Wideband Array Factor of Thinned Antenna Arrays

eess.SP ·2026-09-30 ·Marcin Wachowiak, André Bourdoux, Sofie Pollin
similarity 0.57
Abstract

This work investigates the spatially wideband (SWB) array factor (AF) of linear thinned antenna arrays. The SWB AF is formulated as a matched filter and expressed as a spatially variant convolution of a spatially narrowband (SNB) AF and a SWB kernel. Originally derived for uniform arrays, the SWB AF approximation is revisited and extended to thinned arrays. The approximation is shown to remain accurate across a wide range of parameters. Representing the SWB AF as a convolution offers an intuitive interpretation of how the bandwidth-aperture product modifies the SNB AF. Specifically, the SWB kernel acts as an averaging window for the SNB AF, suppressing the sidelobe levels (SL) of the SNB AF. In thinned arrays, the sidelobes away from the mainlobe can be treated as random, noise-like, making averaging and suppression particularly effective. Next, the analytical formulas for the expected SL and peak-to-sidelobe level (PSL) in SNB thinned arrays are first introduced and subsequently extended to the SWB regime. Finally, simple closed-form expressions for the expected SL and PSL levels of the uniformly thinned arrays with a uniform spectrum are provided. The expected SWB SL and PSL are formulated as functions of the bandwidth-aperture product and are shown to steadily decrease with distance from the mainlobe.

0.07

Phase-Matched Design of Pinching-Antenna Elements on a 60-GHz Dielectric Rod Waveguide

eess.SP physics.optics ·2026-11-05 ·Stylianos D. Asimonis, Dimitrios Tyrovolas, Spyridon Daskalakis, Nikos C. Sagias, Donal P. Lynch +1 more
similarity 0.54
Abstract · 5 pages, 4 figures, 1 table. Submitted to EuCAP 2027

The radiation of pinching antennas, dielectric elements placed on a dielectric waveguide, depends on the element shape. We explain it with a phase-matching, or prism-coupler, picture: the guided rod mode couples into the denser antenna plate at an angle set by the plate-mode effective index, about 31 degrees at 60 GHz, and radiates through the face it reaches first. This yields a simple sizing rule linking element height to contact length. Rectangular, isosceles and right-triangular elements of equal contact length and height are compared from 53 to 67 GHz in full-wave openEMS simulations including the waveguide-to-rod transitions. The rectangle peaks sharply at the rule, reaching 15.9 dBi. The right triangle keeps its gain within 0.7 dB and its side lobes at least 10 dB down over a two-to-one height range. At the rule, both outperform the isosceles element by 1.2 to 2.1 dB, and all remain matched.

0.31

Non-Uniform Antenna Array Design with Large Inter-Element Spacing for Massive MIMO

eess.SP ·2026-09-07 ·Lin Chen, Qu Luo, Orestis Christogeorgos, Pei Xiao, Gabriele Gradoni +3 more
similarity 0.50
Abstract

In massive multiple-input multiple-output (MIMO) systems, uniform arrays are typically configured with inter-element spacing no greater than half a wavelength to avoid grating lobes and spatial aliasing. However, many emerging fifth- and sixth-generation (5G/6G) applications rely on distributed arrays whose inter-element spacing far exceeds half a wavelength. In this paper, we propose an electromagnetic mutual-information-theoretic (EMIT)-guided non-uniform array (NUA) design with large inter-element spacing for massive MIMO systems to address the grating lobes and spatial aliasing artifacts, and in the meantime, to reduce the hardware cost and energy consumption. We start by developing a multipath channel model for non-uniform planar arrays, and analyze the resulting channel characteristics in terms of inter-user interference, aperture efficiency, favorable propagation and channel capacity for the proposed typical NUA patterns. The model is further extended to wideband scenarios, where NUAs demonstrate improved robustness against beam squint due to their more compact element distribution. In addition, we introduce an EMIT approach to NUA design, which links the spatial sampling pattern of an antenna array to the capacity of the resulting MIMO channel. This gives rise to two complementary shaping strategies, amplitude tapering and geometric shaping, and their joint optimization. Numerical results demonstrate that the proposed NUAs significantly outperform conventional uniform arrays in aperture efficiency, channel orthogonality, beam squint mitigation, capacity, and error rate performance.

0.20

A Beam-Switched Sparse Circular Array for Passive Wi-Fi Sensing

eess.SP cs.IT ·2026-11-02 ·Yang Chen, Riccardo Bersan, Daniele Piazza, Stefano Savazzi, Michele D'Amico
similarity 0.50
Abstract · 5 pages, 8 figures. Submitted to EuCAP 2027

Wi-Fi sensing applications require unambiguous angle-of-arrival (AoA) estimation over the full azimuth plane. Uniform circular arrays (UCAs) are shown to remove this ambiguity, but deploying the four RF chains typically available on commercial Wi-Fi chipsets into a sparse layout suffers from spatial undersampling. Such undersampling produces strong grating lobes. To overcome this hardware bottleneck, we first establish a generalized array manifold incorporating element radiation patterns, revealing the suitability and degradation mechanisms of directional UCAs. Then we propose an angularly staggered beam-switched UCA architecture that leverages the spatial complementarity. Numerical evaluations demonstrate that the proposed scheme effectively mitigates grating-lobe ambiguities without increasing the number of RF chains, significantly reducing AoA estimation outliers and improving omnidirectional tracking performance.

0.25

Negative Log-Shifted Gamma: A Generalized Pointing Error Model for Directional Wideband Systems

eess.SP ·2026-10-20 ·Evla S. Ahrazoglu, Ahmet C. Gul, Mehmet N. Akinci, Ibrahim Altunbas, Eylem Erdogan
similarity 0.50
Abstract

Pointing error is critical in highly directional communication systems, where even slight misalignment leads to severe received power reduction. Existing pointing error models fail to cover diverse practical scenarios due to restrictive distributional and design limitations. This paper proposes a novel pointing error model incorporating jitters, AoD/AoA estimation errors, and comprehensive design impacts, including phase shifter quantization, antenna patterns, array design, beamforming architectures, steering capabilities, and bandwidth. To accomplish this, antenna patterns are modeled for both high- and low-gain configurations. Then, the array factor's main lobe is approximated as a Gaussian beam for subarrays and superarrays, accommodating analog and digital beamforming stages in wideband systems under beam squint presence or compensation. Jitters and estimation errors are incorporated via 3D rotations, while phase shift quantization is captured through the phase excitations of the arrays. It is shown that the resulting pointing error follows a novel distribution: the negative log-shifted Gamma (NLSG). Fully characterized by only shape, scale, and location parameters, the NLSG features closed-form statistical expressions. This formulation ensures tractable mathematical manipulation, making it a practical, scalable tool for system design and analysis. Validation via normalized moment error, Jensen-Shannon divergence, and Kolmogorov-Smirnov statistics confirms exceptional accuracy, yielding values primarily below 1%, 0.02, and 0.05, respectively. Furthermore, capacity analysis has demonstrated that specific design choices are paramount for achieving optimal capacity. Finally, important guidelines for designing highly directional wideband communication systems are provided to mitigate the detrimental effects of pointing errors, thereby paving the way for robust next-generation networks.

0.33

Communication-Oriented Channel Characteristics of Holographic Curvature-Reconfigurable Apertures

eess.SP ·2026-09-29 ·Hang Lin, Shu Sun, Hangsong Yan, Qiuming Zhu
published similarity 0.50
Abstract

This letter investigates the joint impact of array curvature and mutual coupling (MC) on holographic curvature-reconfigurable apertures. An analytical framework is developed to characterize spatial correlation, coupling-aware reference directivity, and spectral efficiency. Under the small-curvature regime, we establish a relation linking inter-element distances to coupling perturbations and spatial-mode eigenvalues. Simulation results reveal asymmetric spectral-efficiency variations between transmit- and receive-side array curvature with MC, while their no-MC difference is consistent with zero under hemispherical isotropic scattering. Results based on the 3rd Generation Partnership Project clustered delay line-B channel angular/power profile, together with colored-noise sensitivity analysis, further show that the effects of curvature and receive-side coupling depend on the propagation angular distribution and receiver-noise covariance. These findings highlight the importance of jointly accounting for array geometry, mutual coupling, and receiver noise when evaluating curved holographic multiple-input multiple-output links.

0.57

One ISAC Array, Two Worst Cases: Hardware Impairments in Beamforming and AoA Estimation

eess.SP ·2026-11-04 ·Xuan Chen, Luc Le Magoarou
similarity 0.49
Abstract

In integrated sensing and communication (ISAC), the same base-station array beamforms toward users and estimates their angle of arrival (AoA). In this paper, we study how element-level gain, phase, and position errors affect both functions of a beam-scanning uniform linear array. Any array produces a correlation peak at the true angle, of finite height and width, surrounded by sidelobes. Impairments shift this peak, make it lower and wider, and raise the sidelobes relative to it. A single decomposition explains these three effects: the gain-weighted least-squares fit of the per-antenna phase errors splits them into a tilt, which shifts the peak, and a residual, whose power is taken from the peak and redistributed over the sidelobes according to its spatial spectrum. A beam steered toward the strongest direction suffers from the lower peak only, whereas the AoA estimate suffers from its shift even without noise, and also from the lowering and sidelobes with noise. The worst cases for the two ISAC functions are thus nearly disjoint, and we characterize both: the worst case for beamforming leaves the AoA estimate unbiased, and the worst case for localization loses little beamforming gain. The worst case for localization is a single defect at the junction between two subarrays, and its error, relative to the main-lobe width, does not decrease with the number of antennas. We also characterize random impairments and the effect of noise. In practical terms, our analysis shows that the calibration of a dual-function array must be assessed with respect to both functions.

0.23

Analysis and Approximation of a Spatially Wideband Antenna Array Factor

eess.SP ·2026-08-13 ·Marcin Wachowiak, André Bourdoux, Sofie Pollin
similarity 0.49
Abstract

This work investigates the spatially wideband (SWB) antenna array factor (AF) of uniform linear arrays. First, the SWB AF approximation is derived for narrowband (NB) signals and a large aperture with element spacing satisfying the Nyquist criterion. The derivation accounts for different spatial and spectral windows. Next, an approximation of the SWB AF for a wideband (WB) signal is developed under uniform spatial and spectral weighting. The analysis shows that for fully populated arrays, increasing the bandwidth effectively suppresses the AF sidelobes. Finally, a universal SWB AF approximation is introduced, which is based on recognizing the SWB AF as a spatially variant convolution. In this formulation, the SWB AF is expressed as a convolution of the spatially narrowband (SNB) AF and the SWB kernel, providing insight into how the bandwidth and the spectral weighting affect the resulting SWB AF. The proposed approximation is shown to be accurate for a wide range of bandwidths and element spacings, including sparse arrays. In particular, for sparse arrays, the bandwidth enables suppression of grating-lobe amplitudes by spreading their energy over a wider angular range. An approximation of the grating lobe envelope as a function of the bandwidth-aperture product is provided.

0.34