CS Paper Radar

A Dual-Cam Parallel Elastic Actuator with Shared Gas-Spring Compensation for Humanoid Ankles

Jingcheng Jiang, Yifang Zhang, Nikos G. Tsagarakis

cs.RO ·submitted 2026-08-31 14:06 UTC · v1
published

Abstract

To improve torque capacity and energy efficiency of humanoid ankles, this paper proposes a 2-DoF parallel elastic actuator (PEA). The main novelty of the proposed design lies in its dual-cam, single-gas-spring architecture, which enables torque compensation in both pitch and roll using a shared elastic element, thereby improving structural compactness compared with conventional multi-element compensation schemes. By leveraging parallel gas springs and customized cam modules, the proposed architecture provides dual-axis torque assistance tailored to specific task requirements. The second key contribution is the formulation of a coupled 2-DoF mathematical model that explicitly captures the interdependence between the two compensation units through the shared spring. Based on this model, an optimization-based design framework is developed to synthesize customized cam profiles from prescribed torque references, establishing a systematic link from task requirements to hardware realization. The complete lower-leg CAD integration is presented in detail. Static FEA and kinematic simulations confirm the design's feasibility and torque-relief effectiveness. The results highlight the proposed design as a compact, customizable solution for 2-DoF humanoid ankle torque compensation.

Comment
Accepted to IEEE AIM 2026. Copyright 2026 IEEE. Personal use of this material is permitted
DOI
10.1109/AIM65483.2026.11658177

Closest papers

Nearest neighbours by meaning across the whole index.

Design and Analysis of a Nonlinear Parallel Mechanism Coupling for Dynamic Humanoid Legs

cs.RO ·2026-10-12 ·Rohit Kumar, Heiner Peters, Felix Wiebe, Franek Stark, Janne Janzen +3 more
similarity 0.74
Abstract

Humanoids increasingly demand lightweight leg mechanisms for agile, dynamic, and energy-efficient locomotion. Reducing distal inertia through proximal actuation has thus become a common design goal. Yet, compact transmissions that preserve torque capability and efficient force transmission remain hard to achieve. This paper presents a novel series-parallel leg design combining a knee parallel mechanism, an ankle parallel mechanism, and a nonlinear knee-ankle coupling where all actuators placed closer to the hip. As the knee flexes, the coupling passively assists ankle dorsiflexion for foot clearance and, as it extends it assists plantarflexion for push-off, redistributing ankle load through the knee transmission. We derive the coupling's nonlinear transmission models and validate them in simulation and on hardware. The design shows that the shared transmission lets both joints draw on each other's actuator capacity by easing the knee's peak torque demand under load and the ankle's peak speed demand during fast motion. With the leg's proximal actuator placement, the leg achieves an effective reflected mass of 0.37 kg at the foot for a 6 kg leg, demonstrating very low distal leg inertia for dynamic humanoid robots.

0.12

Modeling and Control of a Rigid-soft Hybrid-link Humanoid Robot

cs.RO ·2026-10-10 ·Zewen He, Taiki Ishigaki, Ko Yamamoto
published similarity 0.64
Abstract

Physical flexibility plays a significant role not only in human motions but also in robot motions. For example, a humanoid robot with passive and flexible elements, which can be regarded as a rigid--soft hybrid-link system, has the advantages of storing energy and mitigating impact in a dynamic motion. However, the motion design and control of a hybrid-link system are challenging to achieve and have only been discussed in the literature. In this study, we propose the framework of inverse kinematics and compliance optimization-based control for a hybrid-link humanoid system that represents the continuous deformation of a flexible structure using the piece-wise constant strain (PCS) model. The proposed method was validated using forward dynamics simulations for standing, jumping, and walking motions. Then, we built an experimental setup using a biped humanoid robot with leaf-spring type prosthesis leg, in which the prosthesis deformation was measured by a motion capture system. Using this setup, we experimentally validated the proposed method for standing balance control in both double- and single-support cases.

0.45

Optimization Design and Simulation Validation of a Variable Stiffness Actuator Based on a Crossed Four-Bar Mechanism

eess.SY ·2026-09-16 ·Yuanlong Ji, Ruizhe Jiang, Xiangyu Xie, Junheng Lin, Dongrun Jin +1 more
published similarity 0.63
Abstract · 7 pages, 5 figures

This paper presents a bio-inspired antagonistic variable stiffness actuator (VSA) based on two crossed four-bar compliant transmission elastic units (CFB-CTEs). The design addresses the difficulty of combining nonlinear elastic shaping with low structural inertia in antagonistic VSA mechanisms. Inspired by the crossed constraint behavior of the anterior and posterior cruciate ligaments during knee flexion, the proposed actuator uses geometric transmission, elastic energy storage, and bilateral antagonistic arrangement to shape the output torque and equivalent stiffness. A multi-objective optimization model is established to balance torque tracking accuracy, equivalent inertia, and mass. The selected compromise design achieved a torque root-mean-square error (RMSE) of $0.883~\mathrm{N\,mm}$ and a total mass of $50.2~\mathrm{g}$. Its average equivalent inertia was reduced by about 78% compared with an independent torque-only optimized design. An ADAMS multibody model was further built to verify the structural response under single-input, opposite-input, and same-input conditions. The results support the feasibility of the proposed crossed four-bar elastic unit as a lightweight nonlinear elastic branch for antagonistic VSAs.

0.68

RAIPAL: A Powerful and Agile Humanoid Arm for Human Tasks

cs.RO ·2026-11-03 ·Donggeon Kim, Hyungho Chris Choi, Donghyuk Choi, Jeongsoo Park, Choongin Lee +2 more
top venue similarity 0.62
Abstract · Published in IEEE Robotics and Automation Letters (RA-L), 2026. Supplementary video: https://youtu.be/xVUWFICD5G0

This paper presents humanoid manipulator hardware designed specifically for human-level performance throughout its broad domain of tasks, from heavy payloads to highly dynamic motions. Unlike conventional designs targeting uniform workspace capability, the proposed approach derives force, speed, and endurance targets from published measurements of task-relevant human upper-limb performance. These targets guide the actuator, mechanism, and thermal design toward torque transparency and sustained operation. The platform integrates force-oriented upper-arm components, speed-oriented forearm components, and a posture-dependent elbow mechanism that shifts its torque-speed behavior. These components are driven by planetary actuators and compact actuator-embedded electronics. Experimental results validate broad task capability, demonstrating a peak payload of 20 kg (2.25x its own mass), an endpoint speed of 20.6 m/s, and continued operation under repeated hammering impacts. Thermal analysis further confirms that the robot's sustained operation capability exceeds the published human load--duration boundary across nearly the entire load spectrum. These findings show that hardware targets derived from human-task measurements narrow the human-to-humanoid capability gap. A supplementary video is available at https://youtu.be/xVUWFICD5G0

0.48

A fully articulated humanoid dexterous hand with human-level joint structure enabled by linkage-based actuation

cs.RO ·2026-10-27 ·Jihao Li, Jianguo Wang, Haotian Guo, Yanzhe Wang, Guodong Lu +1 more
similarity 0.59
Abstract

Humanoid dexterous hands are a core component of embodied intelligence, enabling robots to translate high-level intent into rich and adaptive physical interaction. However, existing designs remain constrained by a persistent trade-off among anthropomorphic kinematic complexity, mechanical robustness, load capacity and control simplicity, limiting dexterous manipulation in unstructured environments. Here we present Torch-Hand, a fully articulated humanoid dexterous hand that replicates the joint structure and motion hierarchy of the human hand with 21 degrees of freedom (DOF), comprising a highly articulated five-DOF thumb and four DOF in each of the remaining fingers. The differentiated thumb integrates multi-axis CMC motion to provide broad opposition and flexible contact orientation relative to the four fingers. Unlike tendon-driven or hybrid actuation approaches, Torch-Hand adopts an entirely linkage-based transmission architecture. By integrating screw-linkage actuation, the hand achieves high grasping force and substantial payload capacity while maintaining a compact anthropomorphic form. Its actuation architecture is optimized for control tractability, with all actuators integrated within the palm and arranged in a serial-robot-like configuration that establishes a direct correspondence between motor motion and joint kinematics. This architecture mechanically decouples functional DOF to reduce unintended inter-joint motion propagation, while allowing independently addressable DOF to be actively coordinated into coupled multi-joint motion patterns during complex manipulation. Comprehensive experiments assess reachable workspace, coordinated fingertip trajectories, thumb opposition, 33-grasp taxonomy coverage, grasping force, payload capacity and task-level manipulation. These results establish Torch-Hand as a robust hardware foundation for dexterous embodied manipulation.

0.22

Contact-Constrained Lower-Limb Joint-Offset Calibration for Humanoid Robots

cs.RO ·2026-09-02 ·Kaixiang Lu, Haiyu Lan, Chunxiao Qiao, You Li, Chengyuan Luo +3 more
top venue similarity 0.58
Abstract

Accurate joint encoder offsets are essential for kinematic consistency in humanoid lower limbs, yet existing calibration methods typically require external motion-capture systems or fiducial targets. We present a self-contained calibration framework exploiting only onboard joint encoders and a pelvis-mounted IMU during static double-support contact. The inter-foot transform from forward kinematics must stay constant when both feet are fixed; minimizing its posture-dependent dispersion yields a nonlinear least-squares problem over the 12-dimensional offset vector. A Hessian eigenstructure analysis shows that parallel pitch axes induce a rotational coupling. Orientation residuals then observe only the pitch-offset sum, while translation and posture diversity set the remaining numerical observability. For the A3 pitch-to-roll-to-yaw ordering, hip-roll and hip-yaw excitation reduce hip-pitch coupling. A standing-posture knee prior then anchors the remaining weak pitch-chain decomposition. Simulation and real-machine injection tests show consistent recovery, and on held-out recordings calibration reduces foot-height RMS residuals from 4.26 to 2.20 mm on A3 and from 8.03 to 1.43 mm on A2. An independent LiDAR-inertial reference checks the pitch-coupled channel. Removing an injected pitch offset moves the leg-odometry vertical drift back toward the LiDAR trajectory. A few static double-support stances thus provide contact-consistent corrections for well-excited directions. Individual offsets in the weak pitch chain remain prior-dependent.

0.44

ShowerFlex: Achieving Pseudo-Static Balancing in a Continuum Shower Hose

cs.RO ·2026-10-01 ·Zhiyu Ren, Girish Krishnan
published similarity 0.57
Abstract · 10 pages, 9 figures. Accepted to ASME IDETC/CIE 2026, Mechanisms and Robotics Conference

With the global population rapidly aging, maintaining independence in Activities of Daily Living (ADLs), particularly bathing or showering, has become a critical challenge. Older adults who sit while showering currently have limited options, often relying on rigid overhead showerheads or flexible hand-held hoses that require continuous gripping and precarious user maneuvers, increasing the risk of falls. To address this need, this paper introduces a highly articulated, pseudo-static balanced continuum mechanism designed specifically for accessible bathing assistance. The proposed mechanism features a modular continuum architecture composed of friction-locked ball-and-socket joints (loc-line), seamlessly integrated with a retractable spring-loaded reel for effective gravity compensation. This hybrid design achieves an intuitive "Push-and-Stay" interaction logic, maintaining an approximate static equilibrium with ergonomically low actuation force, without any external electronic power, while significantly minimizing the force needed for repositioning. Theoretically, we established a recursive forward kinematics framework to construct the geometric model of the structure, coupled with a comprehensive static equilibrium analysis to evaluate the system's holding capacity across its 51-DOF structure. Numerical simulations utilizing Monte Carlo methods validate the system's morphological adaptability and stability at various extreme positions within a standard bath space. Physical experiments further validate the prototype's real-world performance, confirming its intrinsic static stability against gravity and ensuring that the actuation force remains well within the ergonomic capabilities of older adults. Ultimately, this research provides a low-cost, intrinsically safe showerhead design that reduces physical strain, restoring dignity and autonomy in personal hygiene.

0.35

CRISP: Constraint-Resolved Interactions between Subsystems for Predictive Whole-Body Cooperation

cs.RO ·2026-11-05 ·Dario Valenzuela, Jeeseop Kim
similarity 0.57
Abstract · 7 pages, 8 figures

This paper presents a layered control framework that recasts high-dimensional system dynamics as a composition of dynamically interconnected subsystems, with dynamic dual-arm manipulation on the humanoid serving as a representative application. The humanoid is decomposed into a single rigid body (SRB) representing the torso and floating-base dynamic models representing the articulated arms and lower-body. The rigid connections between arm and torso and the closed kinematic chain formed between the end-effectors during cooperative manipulation are represented as holonomic constraints. The corresponding Lagrange multipliers parametrize the interaction wrenches transmitted at the shoulders and between the end-effectors. The high-level nonlinear model predictive control (NMPC) jointly optimizes the subsystem state trajectories, arm torques, ground reaction forces (GRFs), and interaction wrenches, enabling online wrench design and optimization while preserving the dynamic coupling among the independently modeled subsystems. The optimized arm torques are applied directly for cooperative dual-arm manipulation, whereas the prescribed GRFs are mapped to lower-body joint torque for whole-body coordination. We validate the proposed framework through numerical simulations and hardware experiments on a G1 humanoid robot. The results demonstrate optimal interaction wrenches consistent with simulated contact measurement, cooperative dual-arm trajectory tracking, and stable whole-body coordination while executing the NMPC in online manner.

0.25