CS Paper Radar

ARFT: A Synchronized Multimodal RF-Acoustic Dataset for Positioning in Distributed Environments

Daan Delabie, Jarne Van Mulders, Bert Pyck, Gustav Nilsson Gisleskog, Gilles Callebaut

eess.SP eess.AS ·submitted 2026-09-02 14:32 UTC · v1

Abstract

This paper documents the acoustic-radio fusion in Techtile (ARFT) dataset, a synchronized measurement campaign for distributed wireless sensing and positioning in the Techtile testbed. Ultrasonic and radio frequency (RF) signals are simultaneously transmitted and captured at multiple positions in a 2D spatial grid inside the Techtile testbed. Each acquisition cycle corresponds to one rover stop, one position sample, one acoustic recording and one RF snapshot. The RF modality is recorded as per-host pilot measurements and released as channel state information (CSI) tensors for 42 antennas mounted at the ceiling of the room. The acoustic chirp is recorded with 91 synchronized microphones and transmitted by a synchronized quasi omni-directional speaker. The campaign spans 5011 spatial position samples spanning a 5.57 m by 2.89 m area with complete RF and acoustic data. We detail how the measurements are recorded, quantify per-experiment coverage, describe the RF and acoustic data contents, and explain how the aligned modalities support RF-only, acoustic-only, and joint positioning workflows. Furthermore, a static acoustic positioning pipeline that performs anchor selection, pulse-compression ranging, and least squares (LS) localization is elaborated.

Closest papers

Nearest neighbours by meaning across the whole index.

On Distributed Sensing and Adversarial Localization of Narrowband Acoustic Sources for Offshore Data Center Monitoring

cs.RO ·2026-10-25 ·Adnan Abdullah, David Blow, Harsha Gundala Sureshbabu, Dongyoon Joung, Sara Rampazzi +1 more
similarity 0.58
Abstract · Technical report, 19 pages, 11 figures

This report investigates an acoustic surveillance framework for localizing and tracking narrowband adversarial acoustic sources that threaten offshore data centers. Unlike conventional sound source localization (SSL) methods that rely on broadband signals and compact receiver arrays, the considered scenario involves narrowband emissions and sparse sensors. In such scenarios, the observed time-difference-of-arrival (TDOA) measurements are aliased and produce an ambiguous solution space, rendering conventional localization methods ineffective. To address this challenge, we integrate a mobile receiver that temporarily forms anchor pairs with selected fixed receivers, constraining the feasible solution space. The proposed two-stage pipeline first estimates the initial source position using anchor constraints, then initializes a particle filter that jointly tracks source position and velocity using one live anchor measurement and quality-adaptive fixed-pair measurements. We evaluate the proposed method through Monte Carlo acoustic simulations, ROS-Gazebo robotic demonstrations, and open-water field experiments. Our framework achieves a localization success rate of 91% in simulation, while 9 of 10 field trials show tracking error below 2m under receiver-position uncertainty and noisy sensing conditions. These findings demonstrate the feasibility of passive acoustic surveillance for protecting large-scale infrastructure against acoustic threats.

0.27

Scalable BLE Channel Sounding Localization with Ranging-Assisted PDoA

eess.SP cs.NI ·2026-11-06 ·Jorg Wieme, Eli De Poorter, Jeroen Hoebeke
code/data similarity 0.51
Abstract · 14 pages, 5 figures, 7 tables, Appendix, For reproducibility code available at https://gitlab.ilabt.imec.be/iwine/ra-pdoa-simulator

Bluetooth Channel Sounding (CS) enables accurate phase-based ranging, but multi-anchor localization requires sequential ranging exchanges that limit scalability and increase measurement latency. This paper proposes Ranging-Assisted Phase Difference of Arrival (RA-PDoA), a scalable BLE localization architecture combining one active anchor performing a standard two-way CS exchange with multiple passive receive-only anchors observing the same transmissions. A channel-recovery framework is derived that enables passive anchors to reconstruct a channel response suitable for super-resolution delay estimation, allowing multipath-robust ranging without participating in a two-way exchange. Coarse arrival-time information is further used to bound the position estimate and reject inconsistent range solutions. A comprehensive evaluation characterizes the impact of multipath propagation, body shadowing, synchronization requirements, oscillator impairments, anchor placement, and deployment inaccuracies, thereby quantifying the practical infrastructure requirements for scalable BLE localization. Simulation results in modeled indoor environments show that RA-PDoA reduces the 90th-percentile localization error from 175.3 cm to 95.5 cm under body shadowing while maintaining an airtime requirement independent of the number of anchors. The results demonstrate that a single active ranging link enables scalable and multipath-robust BLE Channel Sounding localization.

0.30

Interference-Aware Tone Selection for Bluetooth Channel Sounding

cs.NI ·2026-11-17 ·Taewoo Kim, Vishrant Tripathi
similarity 0.51
Abstract

Bluetooth Channel Sounding enables distance estimation using phase measurements across multiple frequencies. However, coexistence with Wi-Fi and other 2.4 GHz radios can fragment the available frequency band, making reliable ranging difficult when only a limited number of tones can be selected. Drawing on sparse antenna-array theory, we show that interference avoidance alone is insufficient: the spacing of selected tones can introduce repeated peaks in the ranging response, leading to estimation errors. We propose a lightweight, interference-aware tone-selection method that jointly considers frequency occupancy, tone spacing, and frequency span. Our method constructs a 15-tone map using a three-step rule without ranging measurements, ground-truth distance, or online candidate-map search. We evaluate the method using simulations of 900 indoor environments, a public Bluetooth Channel Sounding dataset, and measurements from commercial Nordic nRF54L15 hardware. Compared with random interference avoiding baseline, our proposed method improves ranging success percentage by 39 points under mixed interference, 29 points on the public dataset, and 82 points in hardware experiments. These results demonstrate the importance of tone selection for practical Bluetooth Channel Sounding.

0.18

MESH: Multi-receiver Evaluation of Spatial Hearing across Egocentric and Allocentric Views

eess.AS cs.SD ·2026-11-12 ·Wen Wen, Bohan Li, KwanHo Tam, Yu Xi, Jing Peng +2 more
datasetcode/data similarity 0.51
Abstract · 20 pages. Wen Wen and Bohan Li contributed equally. Evaluation code: https://github.com/Wenanzhi/MESH-Benchmark . Dataset: https://huggingfa…

Spatial hearing in multi-receiver environments requires identifying who speaks, where they are, and how they move. Existing benchmarks evaluate spatial prediction, transcription, tracking, and distributed speech processing, but offer limited evaluation of whether speech signal remains associated with the correct physical source across receivers and motion. We introduce MESH, which evaluates this association through egocentric and allocentric views of shared acoustic scenes. The egocentric view uses local recordings and peer metadata, while the allocentric view combines synchronized recordings from multiple receivers in a shared 3D world frame. MESH contains nearly 40,000 questions across 13 static and dynamic localization and spatial transcription tasks. We evaluate eleven audio-model configurations and a language-model agent using specialist tools. The best static distance-estimation and dynamic direction-tracking accuracies are only 21.90% and 41.54%, respectively, while the lowest word error rates across four transcription tasks range from 59.15% to 73.10%. Ablation studies and additional experiments reveal that existing models are not yet able to effectively leverage peer information and struggle to handle multi-speaker and dynamic scenarios. These findings highlight the gap between access to distributed acoustic information and its effective use for spatial speech understanding. We release the dataset and evaluation code to support further research on collaborative and distributed spatial hearing.

0.32

RTISSLAM: In-air Imaging Sonar SLAM using a Robust Pose Graph and Occupancy Grid Mapping

cs.RO ·2026-10-13 ·Jan Steckel
similarity 0.50
Abstract

Sonar was one of the first sensors with which mobile robots built maps, and in-air sonar keeps working where cameras and lidar fail, in darkness, smoke, dust and next to glass. Classical sonar SLAM, however, relied on geometric features or occupancy grids built from sparse range readings, and both struggle with the specular reflections that dominate indoor sonar. In this letter, we introduce RTISSLAM, a novel sonar-only SLAM system for an embedded 3D imaging sonar, which combines the robust pose graph of BatSLAM 2.0 as back-end with an occupancy grid as map. Energyscapes from delay-multiply-and-sum beamforming with a range-wise CFAR serve as place descriptors for sequence-verified loop closures, acoustic odometry calibrates the wheel odometry online, recognized revisits are registered metrically, and the grid is stored per keyframe and anchored to the pose-graph nodes, so that it follows every loop closure. In simulated worlds with specular walls, RTISSLAM reduces the trajectory error of the wheel odometry from \SI{8.2}{\meter} to \SI{0.31}{\meter} in an office, while lidar-style grid SLAM on the same sonar data fails.

0.29

MAGNETAR: Multipath-Guided Spatial Posteriors for Transmitter Pose Inference in the Upper Mid-Band

cs.RO eess.SP ·2026-09-17 ·Haozhe Lei, Ruibin Chen, Yuhan Jiang, Ali Rasteh, Aditya Dhananjay +1 more
similarity 0.50
Abstract

Robots that localize a radio transmitter need more than a point estimate: in cluttered rooms, one measurement is often consistent with several transmitter locations and, because upper-mid-band antennas are directional, several headings. We present MAGNETAR, which infers a joint posterior over planar transmitter position and heading from a single asynchronous radio-frequency (RF) multipath snapshot, represented by angle-of-arrival and signal-to-noise-ratio estimates, given the room layout and receiver pose. Among our five neural scorers, MAGNETAR adopts a shared 2D U-Net conditioned on each candidate heading, jointly normalizing scores over a discretized position-heading grid. Training uses real-to-sim-calibrated 10 GHz simulations and a small measured subset. Grid-based joint posteriors outperform parametric ones on held-out simulations, the heading-conditioned scorer transfers best to robotic measurements, and fusing joint posteriors improves on fusing position-only marginals.

0.20

Analyzing and Characterizing Multi-Source Interference Effects at Jammertest Norway 2025

eess.SP ·2026-08-16 ·Lucas Heublein, Inigo Cortes Vidal, Tobias Feigl, Alexander Rügamer, Felix Ott
publishedbenchmark similarity 0.50
Abstract · 15 pages, 14 figures

Intentional radio-frequency interference from low-cost GNSS jammers increasingly threatens the accuracy and reliability of satellite-based positioning. Mitigating this threat requires not only detection but also robust waveform classification and characterization, direction-of-arrival inference for localization, and impact estimation on receiver performance under realistic operating conditions; all of which are challenged by strong distribution shifts across devices, sensors, environments, and satellite geometries. We address these challenges by compiling a dedicated real-world dataset recorded during Jammertest 2025 (Andoya, Norway), covering two outdoor test areas with parallel measurements from a single-antenna E1/E5 receiver module and a 2x2 CRPA-array. The dataset spans diverse jamming, spoofing, and meaconing scenarios, including CW, PRN, sweep/chirp, and multi-emitter configurations, and is complemented by per-recording metadata enabling time-aligned ground truth. Methodologically, we benchmark 17 machine learning (ML) architectures for interference-modulation recognition and multi-task characterization (type, occupied bandwidth, and signal strength), and we quantify navigation-relevant degradation via a receiver-aware spectral separation coefficient (SSC) that maps measured spectra to effective (C_s/N_0)_{eff} loss. To enable multi-source analysis, we transfer a YOLOv8s and RF-DETR detector pretrained on a labeled spectrogram dataset to localize multiple simultaneous interferers in GNSS spectrograms and subsequently characterize each detected component. Results show near-99% within-area classification accuracy but substantial cross-area performance drops, highlighting the need for robustness to real-world domain shifts.

0.58

MAPLE-RF: Efficient Probabilistic RF Source Localization in Partially Explored Environments

cs.RO eess.SP ·2026-09-17 ·Haozhe Lei, Sundeep Rangan
similarity 0.50
Abstract

Localizing a radio-frequency (RF) transmitter from received signals often requires a model of the environment to predict how obstacles block and reflect the signal. In many robotic applications, however, only a partial map is available, particularly when a robot localizes the source while exploring with simultaneous localization and mapping (SLAM). We study single-snapshot transmitter localization on such partially explored maps and compare two approaches that output a posterior over transmitter locations. The first extends a digital-twin method, which ray-traces every candidate location, to partial maps by treating unexplored space as free and training on mixed map coverage. The second, MAPLE-RF, encodes estimated path angles of arrival and signal-to-noise ratios as grid channels aligned with map knownness, occupancy, and line-of-sight visibility, and a U-Net scores all candidate positions in one pass without simulating propagation at inference. Ray-tracing simulations of indoor environments indicate that training on mixed map coverage is essential for both approaches. The digital-twin approach is more accurate on most single-snapshot metrics, while MAPLE-RF comes close at a query cost that does not depend on the propagation model and is more than two orders of magnitude below a fresh full-grid query with general-purpose ray tracing. Both outperform Gaussian and Gaussian-mixture baselines, and on exploration routes guided by its own estimates, fused MAPLE-RF posteriors place more probability near the source than the compared methods. Code and data will be released.

0.29