CS Paper Radar

Waves on the Walls: Empirical Characterization of mmWave Lateral Waves for Enhanced Indoor Coverage

Apala Pramanik, Avhishek Biswas, Sasitharan Balasubramaniam, Christos Argyropoulos, Mehmet C. Vuran

cs.NI eess.SY ·submitted 2026-09-03 19:49 UTC · v1
published

Abstract

High-frequency millimeter-wave (mmWave) communication systems are constrained by the surrounding environment, where walls are traditionally treated as obstacles that block or reflect signals indoors. Consequently, current beamforming strategies are tailored to circumvent these obstructions. In this paper, a paradigm shift is introduced that leverages lateral wave propagation along building interfaces to extend mmWave coverage. Unlike traditional reflections, lateral waves travel along the boundary between two media of different refractive indices and decay algebraically with distance, offering a potential alternative path for mmWave connectivity. While well-established at low frequencies in natural media, the existence of lateral waves at mmWave frequencies along engineered building materials has not been demonstrated before. To this end, the first experimental characterization of mmWave lateral waves along a wall is reported. Extensive controlled measurements are employed to characterize the signal-grazing geometry and to establish a frequency and distance-dependent path-loss model for this phenomenon. The results provide the first empirical foundation for a new class of interface-guided mmWave links.

Comment
Accepted for publication at the IEEE International Conference on Mobile Ad-Hoc and Smart Systems (MASS) 2026

Closest papers

Nearest neighbours by meaning across the whole index.

LiDAR-Derived Surface Priors for Multimodal Sensing-Assisted NLoS Beam Search in Indoor 60-GHz Networks

eess.SY ·2026-08-18 ·Amod Ashtekar, Dalton Davis, Rafaela Lomboy, Omar Ibrahim, Raj Sai Sohel Bandari +1 more
similarity 0.53
Abstract

Highly directional 60-GHz Internet-of-Things (IoT) links can exploit naturally occurring indoor surfaces to sustain connectivity under blockage. Identifying viable non-line-of-sight (NLoS) paths, however, can require extensive RF beam training. This paper investigates whether LiDAR can reduce this search overhead by providing a surface-aware prior without assuming a direct mapping between optical return and mmWave reflection. The proposed framework uses LiDAR-derived geometry and return statistics to rank candidate propagation directions, while RF measurements remain responsible for final beam selection. The experimental validation is organized in three stages to separate descriptor robustness, cross-modal association, and beam-search performance. Controlled LiDAR measurements first quantify how geometric and radiometric surface descriptors vary with acquisition geometry. Matched LiDAR and 60-GHz measurements in an L-shaped corridor then determine whether these descriptors are associated with the measured surface-mediated RF response under a prescribed NLoS interaction. Finally, a separate room-scale campaign evaluates the resulting prior using exhaustive TX-RX beam maps without prescribing the underlying propagation mechanism. The measurements show that descriptor reliability depends on acquisition geometry and point-cloud representation, and that LiDAR and RF surface responses exhibit cross-modal association without supporting deterministic RF-power prediction. In the room experiment, local three-ring 3-D planarity retains a beam within 3 dB of exhaustive search at 74.5% of the measured locations while reducing RF beam-pair probing by 72% relative to exhaustive probing over the candidate search region. These results establish LiDAR-derived local surface structure as a communication-oriented prior for concentrating RF probing and reducing mmWave beam-search uncertainty.

0.20

Directional and Quasi-Omnidirectional Indoor Channel Measurements at Upper 6 GHz

cs.ET cs.IT ·2026-10-10 ·Chengsong Fu, Hongbo Zhao, Jianer Zhou, Xiongbin Yu, Weichao Li +4 more
similarity 0.53
Abstract

This paper presents wideband indoor channel measurements and measurement-based statistical modeling of channel parameters in the upper 6 GHz (U6G) band using directional and quasi-omnidirectional antenna pairs. Measurements span 6.425-7.125 GHz at 32 matched positions per configuration in an open hall and an L-shaped corridor. System calibration and frequency-dependent peak-gain normalization retain antenna radiation-pattern weighting. Close-in and floating-intercept models are fitted to line-of-sight (LOS) and non-LOS (NLOS) path loss, respectively. Shadow-fading residuals, RMS delay spread (DS), and equivalent K factors derived from power delay profiles are characterized. LOS exponents range from 1.98 to 2.14. Despite similar attenuation slopes, directional links exhibit smaller LOS residuals and DS and higher equivalent K factors. Hall DS medians are 1.78 and 36.52 ns for directional and quasi-omnidirectional links. Corridor NLOS slopes are -1.12 and 2.54, respectively, while DS ordering varies by position. These results characterize antenna-dependent parameters for U6G indoor channels.

0.12

Human Mobility Sensing Using Wall-Reflected Beamformed Millimeter-Wave Communication Signals

eess.SY ·2026-11-04 ·Tony DiMichele, Raees Matheen Mullah, Christian Lopez Garcia, Zahra Najafi, Mohammed E. Eltayeb
similarity 0.53
Abstract

Existing millimeter-wave (mmWave) communication beam patterns spatially weight human-scattered signals and shape the received-power signatures induced by human motion. We exploit these beam-shaped signatures for device-free walkingpace and walk-direction classification using a wall-reflected 60.8-GHz link with closely spaced phased arrays and fixed communication beamforming vectors. Human movement alters the interference between wall-reflected and scattered signals, producing power oscillations surrounding a central blockage fade. A beam-dependent interference model provides a physical interpretation of these signatures. Using received-power statistics from a continuous-tone experiment, we extract fade duration for walking-pace classification and pre/post-fade asymmetries for walk-direction classification. Measurements comprise 144 crossings from three participants along perpendicular and diagonal trajectories. Under leave-one-participant-out validation, logistic regression achieves 86.1% binary and 79.2% three-class walking pace accuracy, and 77.1% travel-direction accuracy. The results demonstrate mobility sensing using fixed communication beams without channel estimation, Doppler processing, or dedicated radar hardware

0.27

Empirical Analysis of Near-Field Beam Shaping for Blockage Events

eess.SP ·2026-09-23 ·Jy-Chin Liao, Volodymyr Vizitiv, Edward W. Knightly
similarity 0.52
Abstract · 12 pages, 10 figures, 1 table. Submitted to IEEE Transactions on Wireless Communications

Millimeter-wave (mmWave) to sub-terahertz (sub-THz) links can realize high data rates, yet are highly vulnerable to dynamic blockages due to high directivity, limited multipath, and dependence on line-of-sight (LoS) propagation. While structured and self-healing beams are promising solutions, it remains unclear how beam types perform under dynamic blockage. In this paper, we present an empirical analysis of structured near-field beams using two transmission policies. At one extreme, we study beam resilience without obstacle adaptation. At the other extreme, we empirically optimize beam parameters to study the limits of multiple beam types under idealized adaptation. We employ numerical analysis based on the angular spectrum method (ASM) and experimental validation using a sub-THz time-domain spectroscopy (TDS) platform to characterize beam performance over complete blockage events. For the scenarios considered, despite lacking self-healing, focused beams provide the strongest resilience when beam parameters are not adapted during a blockage event (i.e., when all beams are optimized only a priori). In contrast, when optimally adapted to obstacle position, curved beams provide the best performance. Lastly, although Bessel beams benefit from self-healing, this property alone can be insufficient to outperform optimized curved and focused beams. These findings provide guidance for blockage-aware beam selection and adaptation protocols.

0.27

Sensing-Assisted Anti-Blockage Pinching-Antenna Systems For Indoor Immersive Communications

eess.SP ·2026-08-22 ·Yi Hong, Yalin Liu, Yulei Wang, Yaru Fu
similarity 0.51
Abstract

Indoor immersive communication, empowered by millimeter-wave (mmWave) technologies, is a key enabler for 6G-ready Extended Reality (XR) applications. However, mmWave signals are highly susceptible to dynamic obstacles (e.g., moving humans), leading to frequent line-of-sight (LoS) blockages. Moreover, although massive-antenna systems have been widely adopted indoors, their fixed-site deployment limits their effectiveness in wide and dynamic indoor environments such as factories and offices. To address these challenges, we present a sensing-assisted anti-blockage Pinching-Antenna Systems (PASS) solution for indoor immersive communications. By mechanically moving a pinching antenna (PA) along a dielectric waveguide, PASS can flexibly extend the service coverage and re-establish LoS links in wide indoor scenarios. Besides, our solution integrates sensing capabilities into PASS, where the PA executes controlled micro-movements to transmit and receive chirp radar signals, enabling real-time sensing of obstacles. Based on the sensing results, we design an anti-blockage PA movement strategy that detects blocked regions along the waveguide and proactively moves the PA to safe zones. Accordingly, the whole system performs a cycled "sensing-movement-communication" workflow with each cycle completed in a limited frame to ensure both timely sensing and communication. To ensure system efficiency, a closed-form pre-optimized solution of sensing parameters is derived under practical mechanical and sensing constraints. Extensive experiments show that our solution reduces blockage-induced outages to near-zero while sustaining the effective throughput required by indoor immersive applications.

0.26

How Temporal Dispersion of Radio Channels Depends on Signal Bandwidth

eess.SP ·2026-11-02 ·Jarosław Wojtuń, Tomasz Grasza, Cezary Ziółkowski, Jan M. Kelner, Aniruddha Chandra +5 more
publishedhighly cited similarity 0.50
Abstract · 5 pages, 6 figures, 2 tables, 6 equations

The degree of temporal dispersion of a radio channel is the basis for assessing its transmission capabilities. This paper addresses the practical issue of measuring the temporal parameters of a signal transmitted in the millimeter-wave (38 GHz) range. These parameters provide the basis for assessing the degree of dispersion of the received signal. The measurement results show that both the mean and RMS values of the delay spread depend on the distance between the transmitter and receiver as well as the bandwidth of the transmitted signals. The function description of these relationships (model) is determined based on a statistical analysis of the obtained measurement data obtained in a selected indoor corridor under line-of-sight conditions.

0.53

mmWave UE Positioning Under Blockage: Limits for ISAC-Assisted Handover

cs.NI eess.SP ·2026-10-30 ·Seyed Bagher Hashemi Natanzi, Bo Tang
similarity 0.50
Abstract

Proactive handover can save a millimeter-wave (mmWave) link before a passing body blocks it, but only if the network knows where the user is. We ask whether the radio units that serve a user can localize it accurately enough from its uplink sounding reference signals. We derive position error bounds that include synchronization and array calibration errors, with and without reflected paths known from a digital twin, and test two estimators in a ray-traced street canyon on held-out scenarios. Three findings stand out. First, with line of sight to both radio units, array calibration, not bandwidth, limits the bound. Second, blockage degrades the line-of-sight-only bound sharply, whereas known reflections keep the map-aided bound low. Third, a simple dominant-path estimator fails where it matters most: its errors grow sharply around blockage, and proactive handover becomes worse than the 3GPP baseline. A map-aided multipath tracker cuts the median error from 12 to 3.7 cm and removes this significant penalty at link margins of 15 dB and above, but does not yet beat the baseline.

0.35

Multi-Band Indoor MIMO Channel Measurements Across Sub-6 GHz, Mid-Band and mmWave: Comparing 2.55 GHz, 12.75 GHz and 25.5 GHz

eess.SP ·2026-11-11 ·Faruk Pasic, Florian Kiss, Florian Asperger, Diego Dupleich, Stefan Schwarz +1 more
published similarity 0.49
Abstract · Submitted to the 21th European Conference on Antennas and Propagation (EuCAP), 2027

Future wireless systems for indoor applications are expected to extend their operating frequencies from sub-6 GHz to mid-band and millimeter wave (mmWave) frequencies to support higher data rates. To characterize the frequency-dependent propagation behavior across these bands, multi-band channel measurements are essential. In this work, we conduct double-directional multiple-input multiple-output (MIMO) channel measurements in an indoor environment to enable a consistent comparison across three frequency bands. Measurements are performed using a 16x16 MIMO configuration at center frequencies of 2.55 GHz, 12.75 GHz and 25.5 GHz, covering both line-of-sight (LOS) and obstructed line-of-sight (OLOS) conditions. The measured channels are processed using the space-alternating generalized expectation maximization (SAGE) algorithm to extract multipath parameters, which are subsequently used to characterize the angular power distributions across the three frequency bands. The results show substantial angular-domain similarity across all three bands in both LOS and OLOS conditions, while also highlighting frequency-dependent variations.

0.31