CS Paper Radar

Mutual-Coupling-Aware Movable and Fluid Antennas on Holographic Surfaces: A Wavenumber-Domain Circuit-Field Unification

Giovanni Iacovelli, Chandan Kumar Sheemar, Symeon Chatzinotas

eess.SP ·submitted 2026-09-04 10:21 UTC · v2

Abstract

Movable and fluid antenna systems turn antenna position into a design variable. At sub-wavelength spacings, however, their behavior is governed by mutual coupling, modeled today by two disjoint traditions: circuit-theoretic impedance matrices with element-level constants, and field-theoretic kernels with norm-type power constraints. This paper unifies the two. Starting from the impedance kernel of a holographic surface, a Poynting-anchored balance identifies its resistive part with ohmic plus radiated power and its reactive part with stored-energy imbalance, and a circuit-field equivalence shows that the multiport impedance matrix is the kernel sampled at the port separations, in a single closed spherical-Hankel form. In the wavenumber domain the resistive kernel asymptotically diagonalizes in the aperture size: visible modes radiate at closed-form prices, evanescent modes only dissipate, and a flexible port becomes a constant-modulus codeword whose coupling is the pullback of the spectral weight. Coupling-aware multi-user sum-rate maximization over precoders and port positions is then formulated under physical power and voltage constraints and solved by weighted-MMSE and projected-gradient steps with closed-form gradients. A modal relaxation upper-bounds every port configuration and seeds the search by FFT-based codeword projection. A half-wavelength corollary and a superdirectivity margin quantify when coupling hurts, and when it helps.

Closest papers

Nearest neighbours by meaning across the whole index.

Stacked Fluid Metasurfaces: Mutual-Coupling-Aware Modeling and Optimization

eess.SP ·2026-09-25 ·Giovanni Iacovelli, Chandan Kumar Sheemar, Symeon Chatzinotas
similarity 0.60
Abstract

Stacked intelligent metasurfaces process the transmitted field layer by layer, and fluid antennas make the position of every radiator a design variable. Combined, they pack radiators at sub-wavelength spacings within and across layers, where mutual coupling governs the physics that current models omit. This paper develops a coupling-consistent model of a fluid transmit layer illuminating a stack of passive fluid beyond-diagonal layers. The multiport impedance matrix of any port constellation is shown to be the impedance kernel sampled at the three-dimensional separations, in one closed spherical-Hankel form whose in-plane restriction is intra-layer coupling and whose axial restriction replaces the scalar Rayleigh--Sommerfeld propagator. Only the transmitter is driven: the layer currents are induced, and the familiar cascade is the single-pass limit of one matrix inversion. In the wavenumber domain the light circle still separates radiation from reaction, now with a plane-wave propagator attached, every Fourier mode sees a transmission line loaded by the layers, and an efficiency identity shows that what the stack costs in efficiency is set by its total induced-current norm, not by its layer count. Because the load is never assumed layer-diagonal, interconnections may join atoms on different sheets, and vertical networks repeated at every site are spectrally local. Alternating optimization designs precoders, positions, and loads with closed-form gradients. Numerically, fluid ports on a $λ/8$ grid perform within a few per cent of continuously movable ones, while a design based on the conventional cascade model can do worse than open-circuiting the stack.

0.21

Sparse Port Selection under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Haoyu Liang, Zaichen Zhang, Jian Dang
similarity 0.58
Abstract

Fluid antenna systems obtain spatial degrees of freedom by reconfiguring antenna positions within a confined region, a principle that extends to beamforming: shaped beams can be synthesized using far fewer radio-frequency feeds than candidate antenna positions. When the candidates are densely arranged, however, electromagnetic mutual coupling changes the relationship among terminal voltages, induced currents, and radiated fields, so an uncoupled model no longer describes the hardware and may activate an unsuitable set of ports, distorting the synthesized pattern. This paper develops a mutual-coupling-aware framework that converts the desired beam amplitude into a finite-aperture-compatible complex target and models the complete antenna lattice as a coupled multiport network, selecting the active ports and their source voltages through the coupled voltage-to-field response. Inactive candidate ports remain part of the network and carry induced currents, and every compared design is evaluated through the same electromagnetic model under the same source-voltage budget. Numerical results show that the mutual-coupling-aware design improves both the average mainlobe signal-to-noise ratio (SNR) and the peak sidelobe level (PSLL) over coupling-unaware selection and a fixed array, demonstrating that mutual coupling should be exploited in the design itself rather than compensated only in the final evaluation.

0.38

Communication-Oriented Channel Characteristics of Holographic Curvature-Reconfigurable Apertures

eess.SP ·2026-09-29 ·Hang Lin, Shu Sun, Hangsong Yan, Qiuming Zhu
published similarity 0.58
Abstract

This letter investigates the joint impact of array curvature and mutual coupling (MC) on holographic curvature-reconfigurable apertures. An analytical framework is developed to characterize spatial correlation, coupling-aware reference directivity, and spectral efficiency. Under the small-curvature regime, we establish a relation linking inter-element distances to coupling perturbations and spatial-mode eigenvalues. Simulation results reveal asymmetric spectral-efficiency variations between transmit- and receive-side array curvature with MC, while their no-MC difference is consistent with zero under hemispherical isotropic scattering. Results based on the 3rd Generation Partnership Project clustered delay line-B channel angular/power profile, together with colored-noise sensitivity analysis, further show that the effects of curvature and receive-side coupling depend on the propagation angular distribution and receiver-noise covariance. These findings highlight the importance of jointly accounting for array geometry, mutual coupling, and receiver noise when evaluating curved holographic multiple-input multiple-output links.

0.57

Mutual Coupling and Visibility Effects in 2D Holographic Curvature-Reconfigurable Apertures

eess.SP ·2026-10-10 ·Hang Lin, Shu Sun
similarity 0.57
Abstract

Holographic multiple-input multiple-output arrays provide high spatial resolution and flexible wavefront control, but curved or conformal deployments jointly introduce curvature, mutual coupling (MC), and direction-dependent visibility. This paper studies a two-dimensional (2D) holographic curvaturereconfigurable aperture (HoloCuRA). A geometry-based model characterizes element positions, steering, and spatial correlation, while an impedance-based coupling matrix and a visibility vector capture electromagnetic interactions and shadowing. Relative directivity and spectral efficiency are evaluated versus curvature. Results show that MC mainly reshapes local directivity fluctuations, whereas visibility dominates the global pattern and spectral-efficiency variation under both isotropic scattering and CDL-A channels.

0.12

Benchmarking Curvature-Domain Signaling for Continuous-Aperture Wireless Communications: Capacity, Robustness, Detection, and Conditioning Against Legacy Modal Bases

eess.SP eess.SY ·2026-09-23 ·Yasser Al-Eryani
benchmarktheory similarity 0.55
Abstract · 13 pages, 10 figures, 2 tables. Empirical companion to a curvature-domain theory paper; foresight essay at arXiv:2511.14906

Continuous-aperture and holographic MIMO systems motivate signaling that operates directly on large electromagnetic apertures rather than on a few antenna ports. This paper is the empirical companion to the operator-theoretic curvature-domain framework: a reproducible benchmark of curvature-domain signaling under a common scalar aperture-channel model, stress-testing the theory's dual-budget generalized water-filling law against the modal bases used in near-field and holographic MIMO. All methods share the same apertures, quadrature, Fresnel or Green-function propagation, phase-only constraints, power, phase-energy and curvature-energy budgets, receiver noise, phase quantization and training assumptions. The compared coordinates are curvature-regularized eigenmodes, raw phase coefficients, Fourier phase modes, polynomial and Zernike-like wavefront modes, near-field matched-focus profiles, random and optimized RIS phase codebooks, and SVD water-filling upper bounds. The claim is deliberately limited: curvature-domain signaling is a gauge-invariant, physically realizable coordinate system that can approach the phase-space SVD water-filling bound with fewer stable modes where derivative noise, phase quantization, sampling density or ill conditioning limit conventional bases. It is not a claim of new electromagnetic physics, nor that curvature modes dominate every baseline. We prove the SVD upper-bound relation for the discretized phase-control tangent space, derive pairwise-error and perturbation bounds, and report capacity, retained modes, symbol error, robustness, quantization, sampling, regularization, conditioning and cost, with 95% bootstrap confidence intervals on Monte Carlo results. A verdict table locates the regimes where curvature-domain signaling is engineering-relevant: moderate-to-high phase noise, coarse phase quantization, and non-Fourier-diagonal channels.

0.53

Mutual-Coupling-Aware Electromagnetic and Signal Processing Co-Design for Pixel Antenna Arrays

eess.SP ·2026-10-06 ·Ping Ma, Mengzhen Liu, Rang Liu, Ming Li, A. Lee Swindlehurst
similarity 0.53
Abstract · 7 pages, 5 figures, fonference

Reconfigurable pixel antenna arrays provide additional electromagnetic (EM) degrees of freedom for wireless transmission by enabling hardware-level adaptation of radiation responses. In practical arrays, inter-element mutual coupling (MC) alters the switch-state-dependent responses, causing MC-unaware designs to be mismatched with the realized coupled-array channels. To address this issue, we propose an MC-aware EM and signal-processing co-design framework for downlink multi-user multiple-input single-output (MU-MISO) systems. The full pixel antenna array is modeled as a unified multi-port circuit network that jointly characterizes the feed ports and switch-controlled pixel ports. By combining the impedance matrix extracted from Computer Simulation Technology (CST) Studio Suite simulations with the full-array open-circuit far-field responses, we construct a switch-state-dependent EM-domain channel that explicitly captures both intra-antenna pixel coupling and inter-element MC. Based on this model, we formulate a sum-rate maximization problem over the binary switch-state vector and the transmit precoder. To address the resulting mixed-integer non-convex problem, we develop an alternating optimization algorithm in which the binary switch-state vector is updated via sequential exhaustive block optimization (SEBO), while the transmit precoder is optimized using fractional programming (FP). CST-based simulations show that the proposed MC-aware design outperforms MC-unaware, MC-free, and conventional patch-array baselines. These results demonstrate that accurate MC modeling is essential not only for reducing model mismatch, but also for exploiting the coupled embedded responses of practical pixel antenna arrays.

0.41

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.50
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.34

Impedance-Aware Zonal Port Activation for Fluid Antenna Arrays

cs.IT ·2026-08-13 ·Yuanhui Wu, Hao Jiang, Zaichen Zhang
similarity 0.50
Abstract

Fluid antenna array (FAA) activation jointly determines the effective multi-user channel for precoding and the sparse physical aperture. Channel-oriented selection can concentrate high-gain ports and erode aperture quality, whereas geometry-oriented selection does not adapt to instantaneous channel state information (CSI). This paper formulates finite-port FAA activation as a rate--aperture--feasibility problem under an exact RF-chain budget. We propose impedance-aware zonal port activation (IA-ZPA), which couples compact CSI-conditioned port scoring with a checkerboard feasibility projection and inference-time mutual-impedance-aware selection. The learned scorer ranks ports, while the deterministic rule fixes the active aperture; a separate current-domain RZF backend then evaluates source-drive feasibility. Under a common induced-EMF protocol, IA-ZPA attains the largest constrained rate among the methods satisfying the prescribed mean-PSLL target with a substantially lower decision time than greedy selection.

0.32