CS Paper Radar

Stacked Fluid Metasurfaces: Mutual-Coupling-Aware Modeling and Optimization

Giovanni Iacovelli, Chandan Kumar Sheemar, Symeon Chatzinotas

eess.SP ·submitted 2026-09-25 17:45 UTC · v1

Abstract

Stacked intelligent metasurfaces process the transmitted field layer by layer, and fluid antennas make the position of every radiator a design variable. Combined, they pack radiators at sub-wavelength spacings within and across layers, where mutual coupling governs the physics that current models omit. This paper develops a coupling-consistent model of a fluid transmit layer illuminating a stack of passive fluid beyond-diagonal layers. The multiport impedance matrix of any port constellation is shown to be the impedance kernel sampled at the three-dimensional separations, in one closed spherical-Hankel form whose in-plane restriction is intra-layer coupling and whose axial restriction replaces the scalar Rayleigh--Sommerfeld propagator. Only the transmitter is driven: the layer currents are induced, and the familiar cascade is the single-pass limit of one matrix inversion. In the wavenumber domain the light circle still separates radiation from reaction, now with a plane-wave propagator attached, every Fourier mode sees a transmission line loaded by the layers, and an efficiency identity shows that what the stack costs in efficiency is set by its total induced-current norm, not by its layer count. Because the load is never assumed layer-diagonal, interconnections may join atoms on different sheets, and vertical networks repeated at every site are spectrally local. Alternating optimization designs precoders, positions, and loads with closed-form gradients. Numerically, fluid ports on a $λ/8$ grid perform within a few per cent of continuously movable ones, while a design based on the conventional cascade model can do worse than open-circuiting the stack.

Closest papers

Nearest neighbours by meaning across the whole index.

Mutual-Coupling-Aware Movable and Fluid Antennas on Holographic Surfaces: A Wavenumber-Domain Circuit-Field Unification

eess.SP ·2026-09-04 ·Giovanni Iacovelli, Chandan Kumar Sheemar, Symeon Chatzinotas
similarity 0.60
Abstract

Movable and fluid antenna systems turn antenna position into a design variable. At sub-wavelength spacings, however, their behavior is governed by mutual coupling, modeled today by two disjoint traditions: circuit-theoretic impedance matrices with element-level constants, and field-theoretic kernels with norm-type power constraints. This paper unifies the two. Starting from the impedance kernel of a holographic surface, a Poynting-anchored balance identifies its resistive part with ohmic plus radiated power and its reactive part with stored-energy imbalance, and a circuit-field equivalence shows that the multiport impedance matrix is the kernel sampled at the port separations, in a single closed spherical-Hankel form. In the wavenumber domain the resistive kernel asymptotically diagonalizes in the aperture size: visible modes radiate at closed-form prices, evanescent modes only dissipate, and a flexible port becomes a constant-modulus codeword whose coupling is the pullback of the spectral weight. Coupling-aware multi-user sum-rate maximization over precoders and port positions is then formulated under physical power and voltage constraints and solved by weighted-MMSE and projected-gradient steps with closed-form gradients. A modal relaxation upper-bounds every port configuration and seeds the search by FFT-based codeword projection. A half-wavelength corollary and a superdirectivity margin quantify when coupling hurts, and when it helps.

0.44

Sparse Port Selection under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Haoyu Liang, Zaichen Zhang, Jian Dang
similarity 0.59
Abstract

Fluid antenna systems obtain spatial degrees of freedom by reconfiguring antenna positions within a confined region, a principle that extends to beamforming: shaped beams can be synthesized using far fewer radio-frequency feeds than candidate antenna positions. When the candidates are densely arranged, however, electromagnetic mutual coupling changes the relationship among terminal voltages, induced currents, and radiated fields, so an uncoupled model no longer describes the hardware and may activate an unsuitable set of ports, distorting the synthesized pattern. This paper develops a mutual-coupling-aware framework that converts the desired beam amplitude into a finite-aperture-compatible complex target and models the complete antenna lattice as a coupled multiport network, selecting the active ports and their source voltages through the coupled voltage-to-field response. Inactive candidate ports remain part of the network and carry induced currents, and every compared design is evaluated through the same electromagnetic model under the same source-voltage budget. Numerical results show that the mutual-coupling-aware design improves both the average mainlobe signal-to-noise ratio (SNR) and the peak sidelobe level (PSLL) over coupling-unaware selection and a fixed array, demonstrating that mutual coupling should be exploited in the design itself rather than compensated only in the final evaluation.

0.38

To Stack or Not to Stack? Jacobian Conditioning and the Benefits of Depth in Metasurface-Based Linear Transformation Synthesis

eess.SP ·2026-10-14 ·Andrea Abrardo, Andrea Garulli
similarity 0.58
Abstract · 12 pages, 8 figures, journal paper

This paper investigates when and why stacking programmable metasurfaces into Stacked Intelligent Metasurfaces (SIMs) improves linear transformation synthesis at a fixed phase-control budget. The analysis shows that algebraic Jacobian rank alone is insufficient to characterize practical synthesis, which also depends on the strength and balance of the sensitivity directions generated by the available controls. A layer-resolved analysis of the cascade model explains how inter-layer propagation can generate complementary sensitivity directions. The relevance of this mechanism is then assessed using an S-parameter multiport model that includes electromagnetic coupling and multiple scattering. Numerical results in near- and far-field sensing scenarios show that distributing the same control resources across multiple layers can strengthen weak transformation directions, improve Jacobian conditioning, and substantially enhance synthesis accuracy. These findings explain why increasing depth can offer benefits that are not obtained by simply enlarging a single programmable surface, and identify layer complementarity and Jacobian conditioning as useful criteria for SIM architecture design.

0.19

Möbius Reparametrization of Multiport-Network Models of PIN-Diode-Programmable Metasurfaces for Accurate Low-Order Neumann Approximations

eess.SP physics.app-ph ·2026-09-29 ·Philipp del Hougne
similarity 0.57
Abstract · 6 pages with 3 figures

Accurate models of programmable metasurfaces based on multiport-network theory (MNT) account for mutual coupling (MC) through a configuration-dependent matrix inversion. The latter's high computational cost during gradient-based optimization (GBO) can be alleviated via a finite-order Neumann approximation. We show that the accuracy of this approximation depends strongly on the (tacitly) chosen MNT parametrization. For 1-bit-programmable meta-elements (e.g., meta-elements based on PIN diodes), we identify a closed-form Möbius reparametrization that depends only on the meta-element's two load states and requires neither training data nor numerical optimization. For an experimentally estimated proxy MNT model of a fabricated 96-element 19-GHz dynamic metasurface antenna with strong MC, a second-order Neumann approximation with our reparametrization achieves forward and control-gradient accuracies of 21.68 and 21.70 dB, respectively. Relative to the full proxy MNT, it reduces the runtime of a combined forward and control-gradient evaluation by a third and the saved-tensor memory by a factor of ten. In a prototypical GBO problem of end-to-end optimization for DMA-based scene classification, it achieves 94.97% test accuracy vs. 95.57% with the full model. We further note that MC-strength metrics and MC-unaware benchmarks should be parametrization-invariant, motivating, for instance, definitions based on the best directly fitted zeroth-order model.

0.46

Joint Power Allocation and Phase-Shift Design for Beyond-Diagonal Stacked Intelligent Metasurfaces-Aided ISAC Systems

cs.IT ·2026-08-19 ·Yuhui Jiao, Qian Zhang, Xuejun Cheng, Meihui Liu, Jiancheng An +1 more
published similarity 0.53
Abstract

Stacked intelligent metasurfaces (SIM) provide an efficient architecture for integrated sensing and communication (ISAC) with few radio-frequency (RF) chains. However, diagonal SIM provide only element-wise phase control, so balancing multiuser communication and sensing performance may require additional layers. In this letter, we propose a beyond-diagonal SIM (BD-SIM) architecture for ISAC, enabling controllable intra-layer coupling through reconfigurable impedance networks, thereby enhancing wave-domain processing flexibility. We develop a unified alternating optimization framework applicable to fully-connected, group-connected, and diagonal SIM architectures. Within this framework, we derive a closed-form power allocation rule and propose an effective variable separation algorithm for multi-layer phase-shift design. Simulation results show that the proposed BD-SIM achieve a better communication-sensing trade-off and require fewer layers to attain performance comparable to conventional SIM.

0.54

Channel Estimation for Stacked Intelligent Metasurfaces with Mutual Coupling

eess.SP ·2026-10-31 ·Chandan Kumar Sheemar, Giovanni Iacovelli, Symeon Chatzinotas
similarity 0.53
Abstract

Channel estimation for stacked intelligent metasurfaces (SIMs) has relied on the cascade model, which ignores mutual coupling and inter-layer reflection. Under a coupling-consistent multiport model, we show that the pilots are linear in the unknown channel segments and derive least-squares and linear minimum-mean-square-error estimators, an identifiability condition and an exact error decomposition for the reactance training schedule, and a gradient-based schedule design. Cascade-based estimation floors above $0$~dB normalized error at practical layer spacings and collapses the sum rate below that of the bare feed, whereas the proposed estimators retain about $80\%$ of the perfect-channel-knowledge sum rate.

0.28

EM-Guided Graph Learning for Fluid Antenna Beamforming under Current-Domain Constraints

cs.IT ·2026-08-13 ·Yuanhui Wu, Hao Jiang, Zaichen Zhang
similarity 0.52
Abstract

Fluid antenna arrays (FAAs) reconfigure a finite set of radiating ports within a prescribed aperture. In compact apertures, however, channel-driven placement may cluster ports, strengthen mutual coupling, degrade radiation conditioning, increase source-voltage demand, and produce uneven current loading. This paper studies downlink multi-user beamforming with jointly optimized port placement and current-domain transmission. An electromagnetic-guided graph network predicts port layouts from channel observations and refines them using geometric and mutual-impedance information. The training objective jointly considers communication performance and electromagnetic feasibility, while a common evaluation procedure is applied to all methods. The results show that, under a common feasibility standard, the proposed method provides a controllable tradeoff among communication rate, current loading, and configuration latency.

0.32

Impedance-Aware Zonal Port Activation for Fluid Antenna Arrays

cs.IT ·2026-08-13 ·Yuanhui Wu, Hao Jiang, Zaichen Zhang
similarity 0.51
Abstract

Fluid antenna array (FAA) activation jointly determines the effective multi-user channel for precoding and the sparse physical aperture. Channel-oriented selection can concentrate high-gain ports and erode aperture quality, whereas geometry-oriented selection does not adapt to instantaneous channel state information (CSI). This paper formulates finite-port FAA activation as a rate--aperture--feasibility problem under an exact RF-chain budget. We propose impedance-aware zonal port activation (IA-ZPA), which couples compact CSI-conditioned port scoring with a checkerboard feasibility projection and inference-time mutual-impedance-aware selection. The learned scorer ranks ports, while the deterministic rule fixes the active aperture; a separate current-domain RZF backend then evaluates source-drive feasibility. Under a common induced-EMF protocol, IA-ZPA attains the largest constrained rate among the methods satisfying the prescribed mean-PSLL target with a substantially lower decision time than greedy selection.

0.32